Daily Papers

Artificial intelligence requires deliberate reasoning, temporal awareness, and effective constraint management, capabilities traditional LLMs often lack due to their reliance on pattern matching, limited self-verification, and inconsistent constraint handling. We introduce Multi-Agent Collaborative Intelligence (MACI), a framework comprising three key components: 1) a meta-planner (MP) that identifies, formulates, and refines all roles and constraints of a task (e.g., wedding planning) while generating a dependency graph, with common-sense augmentation to ensure realistic and practical constraints; 2) a collection of agents to facilitate planning and address task-specific requirements; and 3) a run-time monitor that manages plan adjustments as needed. By decoupling planning from validation, maintaining minimal agent context, and integrating common-sense reasoning, MACI overcomes the aforementioned limitations and demonstrates robust performance in two scheduling problems.

Autonomous systems, such as self-driving cars and drones, have made significant strides in recent years by leveraging visual inputs and machine learning for decision-making and control. Despite their impressive performance, these vision-based controllers can make erroneous predictions when faced with novel or out-of-distribution inputs. Such errors can cascade into catastrophic system failures and compromise system safety. In this work, we compute Neural Reachable Tubes, which act as parameterized approximations of Backward Reachable Tubes to stress-test the vision-based controllers and mine their failure modes. The identified failures are then used to enhance the system safety through both offline and online methods. The online approach involves training a classifier as a run-time failure monitor to detect closed-loop, system-level failures, subsequently triggering a fallback controller that robustly handles these detected failures to preserve system safety. For the offline approach, we improve the original controller via incremental training using a carefully augmented failure dataset, resulting in a more robust controller that is resistant to the known failure modes. In either approach, the system is safeguarded against shortcomings that transcend the vision-based controller and pertain to the closed-loop safety of the overall system. We validate the proposed approaches on an autonomous aircraft taxiing task that involves using a vision-based controller to guide the aircraft towards the centerline of the runway. Our results show the efficacy of the proposed algorithms in identifying and handling system-level failures, outperforming methods that rely on controller prediction error or uncertainty quantification for identifying system failures.

Enabling robots to execute long-horizon manipulation tasks from free-form language instructions remains a fundamental challenge in embodied AI. While vision-language models (VLMs) have shown promise as high-level planners, their deployment in the real world is hindered by two gaps: (i) the scarcity of large-scale, sequential manipulation data that couples natural language with multi-step action plans, and (ii) the absence of dense, interpretable rewards for fine-tuning VLMs on planning objectives. To address these issues, we propose REVER, a framework that empowers VLMs to generate and validate long-horizon manipulation plans from natural language instructions in real-world scenarios. Under REVER we train and release RoboFarseer, a VLM incentivized to emit chain-of-thought that perform temporal and spatial reasoning, ensuring physically plausible and logically coherent plans. To obtain training data, we leverage the Universal Manipulation Interface framework to capture hardware-agnostic demonstrations of atomic skills. An automated annotation engine converts each demonstration into vision-instruction-plan triplet. We introduce a verifiable reward that scores the generated plan by its ordered bipartite matching overlap with the ground-truth skill sequence. At run time, the fine-tuned VLM functions both as a planner and as a monitor, verifying step-wise completion. RoboFarseer matches or exceeds the performance of proprietary models that are orders of magnitude larger, while on open-ended planning it surpasses the best baseline by more than 40%. In real-world, long-horizon tasks, the complete system boosts overall success by roughly 60% compared with the same low-level controller without the planner. We will open-source both the dataset and the trained model upon publication.

We propose a multicountry quantile factor augmeneted vector autoregression (QFAVAR) to model heterogeneities both across countries and across characteristics of the distributions of macroeconomic time series. The presence of quantile factors allows for summarizing these two heterogeneities in a parsimonious way. We develop two algorithms for posterior inference that feature varying level of trade-off between estimation precision and computational speed. Using monthly data for the euro area, we establish the good empirical properties of the QFAVAR as a tool for assessing the effects of global shocks on country-level macroeconomic risks. In particular, QFAVAR short-run tail forecasts are more accurate compared to a FAVAR with symmetric Gaussian errors, as well as univariate quantile autoregressions that ignore comovements among quantiles of macroeconomic variables. We also illustrate how quantile impulse response functions and quantile connectedness measures, resulting from the new model, can be used to implement joint risk scenario analysis.

Vision is the richest and most cost-effective technology for Driver Monitoring Systems (DMS), especially after the recent success of Deep Learning (DL) methods. The lack of sufficiently large and comprehensive datasets is currently a bottleneck for the progress of DMS development, crucial for the transition of automated driving from SAE Level-2 to SAE Level-3. In this paper, we introduce the Driver Monitoring Dataset (DMD), an extensive dataset which includes real and simulated driving scenarios: distraction, gaze allocation, drowsiness, hands-wheel interaction and context data, in 41 hours of RGB, depth and IR videos from 3 cameras capturing face, body and hands of 37 drivers. A comparison with existing similar datasets is included, which shows the DMD is more extensive, diverse, and multi-purpose. The usage of the DMD is illustrated by extracting a subset of it, the dBehaviourMD dataset, containing 13 distraction activities, prepared to be used in DL training processes. Furthermore, we propose a robust and real-time driver behaviour recognition system targeting a real-world application that can run on cost-efficient CPU-only platforms, based on the dBehaviourMD. Its performance is evaluated with different types of fusion strategies, which all reach enhanced accuracy still providing real-time response.

The usage of deep neural networks in safety-critical systems is limited by our ability to guarantee their correct behavior. Runtime monitors are components aiming to identify unsafe predictions and discard them before they can lead to catastrophic consequences. Several recent works on runtime monitoring have focused on out-of-distribution (OOD) detection, i.e., identifying inputs that are different from the training data. In this work, we argue that OOD detection is not a well-suited framework to design efficient runtime monitors and that it is more relevant to evaluate monitors based on their ability to discard incorrect predictions. We call this setting out-ofmodel-scope detection and discuss the conceptual differences with OOD. We also conduct extensive experiments on popular datasets from the literature to show that studying monitors in the OOD setting can be misleading: 1. very good OOD results can give a false impression of safety, 2. comparison under the OOD setting does not allow identifying the best monitor to detect errors. Finally, we also show that removing erroneous training data samples helps to train better monitors.

The deployment of generative AI (GenAI) models raises significant fairness concerns, addressed in this paper through novel characterization and enforcement techniques specific to GenAI. Unlike standard AI performing specific tasks, GenAI's broad functionality requires ``conditional fairness'' tailored to the context being generated, such as demographic fairness in generating images of poor people versus successful business leaders. We define two fairness levels: the first evaluates fairness in generated outputs, independent of prompts and models; the second assesses inherent fairness with neutral prompts. Given the complexity of GenAI and challenges in fairness specifications, we focus on bounding the worst case, considering a GenAI system unfair if the distance between appearances of a specific group exceeds preset thresholds. We also explore combinatorial testing for assessing relative completeness in intersectional fairness. By bounding the worst case, we develop a prompt injection scheme within an agent-based framework to enforce conditional fairness with minimal intervention, validated on state-of-the-art GenAI systems.

Self-driving laboratories increasingly rely on low-cost liquid handlers such as the Opentrons OT-2, which ship without the pressure-based aspiration monitoring of Hamilton or Tecan systems and are typically run open-loop. Two failure modes go undetected: protocols that are syntactically valid but violate assay-specific invariants (e.g., tip reuse between a PCR template and a no-template control), and physical execution failures (partial dispense, air bubbles, missing tips) at runtime. We present AEGIS, a two-layer guardian for both. Layer 1 pairs a curated machine-readable assay rule database with an LLM that reasons over OT-2 Python code, reaching an adjusted F1 of 0.97 on a 24-protocol benchmark across five assay families and beating rules-only and LLM-only ablations across five backends; a free open-weight model ties the best proprietary one, so no paid API is required. Layer 2 fits a PCA world model to YOLO-cropped four-frame pipette trajectories; under a leakage-free leave-one-plate-out evaluation it reaches average precision 0.89 and operating-point F1 0.71 (AUROC 0.80), a deployment-faithful number that matches the live demonstration, and we characterize the small-pipette (p20) resolution limit (F1 0.47). A live demonstration on a physical OT-2 (five replicates per condition) catches planted no-tip failures deterministically and partial dispense on coloured dyes, with an always-VLM self-vote gate lifting partial-dispense recall to 5/5; transparent water is a principled limit of any front-view-only monitor, which AEGIS surfaces as low-confidence VLM reasoning rather than a wrong verdict. Cascade triage holds VLM cost near 1.63 per plate versus 10.33 for an always-VLM baseline. AEGIS is open source and, to our knowledge, the first system to unify pre-flight assay-aware validation with runtime visual monitoring for an open-source liquid handler.

Vision-Language-Action (VLA) models enable robots to follow natural language instructions and generalize across diverse tasks, but they remain vulnerable to execution failures that compromise reliability in real-world deployment. Detecting such failures during execution is therefore critical for the robust deployment of embodied systems. Existing failure detection methods either rely on expensive action resampling or external models, while alternatives propagate trajectory-level labels uniformly across every timestep, obscuring localized failure signals. In this paper, we propose Hide-and-Seek, a framework that formulates VLA failure detection as a coarsely supervised learning problem. By combining inter-trajectory and intra-trajectory contrastive objectives, Hide-and-Seek localizes failure-indicative actions and induces temporally structured failure signals from trajectory-level supervision alone, without any step-level annotation. We evaluate Hide-and-Seek on LIBERO, VLABench, and a real-world robotic platform across three representative VLA policies: OpenVLA, π_0, and π_{0.5}.Our method achieves state-of-the-art multi-task failure detection performance with a practical accuracy--timeliness trade-off under conformal prediction, and generalizes well to both seen and unseen tasks.

Learning-based manipulation policies have made substantial progress in real-world robot manipulation, particularly for short-horizon action generation. However, deployment in open workspaces remains fragile under unexpected local scene dynamics, such as moving objects, transient occlusions, or disturbances near the intended motion. Existing runtime monitors often rely on global observation anomalies, policy uncertainty, or frame-level visual changes, and struggle to distinguish task-relevant execution risk from benign visual variation. We introduce PATCH, an action-chunk-conditioned latent patch innovation monitor for deployment-time intervention. Given the active action chunk, PATCH defines a projected execution corridor, predicts latent patch evolution inside it, and accumulates persistent residuals unexplained by the robot's own motion. These residuals form a localized intervention signal that allows PATCH-Router to pause execution, select an available recovery source, and resume the original policy once localized innovation subsides. Experiments on real robot rollout data show that PATCH produces more stable and context-relevant triggers than competing runtime monitors. Real-robot deployment further demonstrates monitor-driven intervention and policy resumption for disturbance-aware manipulation. Project Page: https://yananzhou5555.github.io/PATCH/.

Long-horizon LLM agents can fail quietly: they settle on one reading of the evidence early, then spend the rest of the run defending it. We call this premature commitment. Final-answer scoring misses the failure mode because it sees only the answer, not whether the process has already collapsed to a stable path. We define representational commitment as cross-run hidden-state convergence at a fixed reasoning step, and use it as an early diagnostic of trajectory consistency. On Llama-3.1-70B running ReAct on HotpotQA, step-4 hidden-state similarity predicts downstream behavioral consistency (r = -0.35, partial r = -0.45), with a localized temporal and layer-wise signature. The signal replicates across Qwen-2.5-72B and Phi-3-14B, and on StrategyQA (r = -0.83). It does not track correctness: committed-wrong and committed-correct questions are not separable in activation similarity. That boundary is central to the claim. Commitment tells us whether an agent has settled, not whether it is right. A runtime monitor detects inconsistent trajectories from hidden states at AUROC up to 0.97 (0.85--0.88 under a stricter split), and a prompting intervention cuts behavioral variance by 28% against a token-matched control while leaving accuracy statistically unchanged. We also test whether the signal can route self-consistency compute; on a harder benchmark it helps only modestly and is matched by a simpler output-based baseline. The result is a diagnostic for a hidden process failure, with clear limits rather than a general accuracy lever.

Imitation learning has enabled robots to acquire complex visuomotor manipulation skills from demonstrations, but deployment failures remain a major obstacle, especially for long-horizon action-chunked policies. Once execution drifts off the demonstration manifold, these policies often continue producing locally plausible actions without recovering from the failure. Existing runtime monitors either require failure data, over-trigger under benign feature drift, or stop at failure detection without providing a recovery mechanism. We present Rewind-IL, a training-free online safeguard framework for generative action-chunked imitation policies. Rewind-IL combines a zero-shot failure detector based on Temporal Inter-chunk Discrepancy Estimate (TIDE), calibrated with split conformal prediction, with a state-respawning mechanism that returns the robot to a semantically verified safe intermediate state. Offline, a vision-language model identifies recovery checkpoints in demonstrations, and the frozen policy encoder is used to construct a compact checkpoint feature database. Online, Rewind-IL monitors self-consistency in overlapping action chunks, tracks similarity to the checkpoint library, and, upon failure, rewinds execution to the latest verified safe state before restarting inference from a clean policy state. Experiments on real-world and simulated long-horizon manipulation tasks, including transfer to flow-matching action-chunked policies, demonstrate that policy-internal consistency coupled with semantically grounded respawning offers a practical route to improved reliability in imitation learning. Supplemental materials are available at https://sjay05.github.io/rewind-il

Smart contract transactions associated with security attacks often exhibit distinct behavioral patterns compared with historical benign transactions before the attacking events. While many runtime monitoring and guarding mechanisms have been proposed to validate invariants and stop anomalous transactions on the fly, the empirical effectiveness of the invariants used remains largely unexplored. In this paper, we studied 23 prevalent invariants of 8 categories, which are either deployed in high-profile protocols or endorsed by leading auditing firms and security experts. Using these well-established invariants as templates, we developed a tool Trace2Inv which dynamically generates new invariants customized for a given contract based on its historical transaction data. We evaluated Trace2Inv on 42 smart contracts that fell victim to 27 distinct exploits on the Ethereum blockchain. Our findings reveal that the most effective invariant guard alone can successfully block 18 of the 27 identified exploits with minimal gas overhead. Our analysis also shows that most of the invariants remain effective even when the experienced attackers attempt to bypass them. Additionally, we studied the possibility of combining multiple invariant guards, resulting in blocking up to 23 of the 27 benchmark exploits and achieving false positive rates as low as 0.32%. Trace2Inv outperforms current state-of-the-art works on smart contract invariant mining and transaction attack detection in terms of both practicality and accuracy. Though Trace2Inv is not primarily designed for transaction attack detection, it surprisingly found two previously unreported exploit transactions, earlier than any reported exploit transactions against the same victim contracts.

A verifier for robot policies reads a candidate behavior and returns a score for how well it did, used both to evaluate vision-language-action policies and to train them. Verifiers range from success detectors and reward models to runtime monitors, safety filters, and temporal-logic specifications. We survey roughly 150 verifiers and compare them along two properties. Availability is how much a verdict costs, how early in a rollout the verdict arrives, and how often a verdict can be asked for. Availability rises as verdicts get cheaper, earlier, and denser. Credibility is how much a high score tells us about the task. Credibility falls as the judgment becomes gameable and self-serving. We group the verifiers by who supplies the judgment: human verifiers, rule-based and formal verifiers, learned and pretrained verifiers, and model-intrinsic verifiers. Across the four families, we find that credibility falls as availability rises. Regardless of who supplies the judgment, there is no free checker. We then examine what validates a verifier itself, and how much a high score tells us. Three measures appear in the literature: agreement with human labels, the performance of the policy it trains, and behavior under reward hacking. We close with nine metrics that make a verifier claim checkable, and coordinates for the verifiers still to be built.

The deployment of autonomous AI agents in sensitive domains, such as healthcare, introduces critical risks to safety, security, and privacy. These agents may deviate from user objectives, violate data handling policies, or be compromised by adversarial attacks. Mitigating these dangers necessitates a mechanism to formally guarantee that an agent's actions adhere to predefined safety constraints, a challenge that existing systems do not fully address. We introduce VeriGuard, a novel framework that provides formal safety guarantees for LLM-based agents through a dual-stage architecture designed for robust and verifiable correctness. The initial offline stage involves a comprehensive validation process. It begins by clarifying user intent to establish precise safety specifications. VeriGuard then synthesizes a behavioral policy and subjects it to both testing and formal verification to prove its compliance with these specifications. This iterative process refines the policy until it is deemed correct. Subsequently, the second stage provides online action monitoring, where VeriGuard operates as a runtime monitor to validate each proposed agent action against the pre-verified policy before execution. This separation of the exhaustive offline validation from the lightweight online monitoring allows formal guarantees to be practically applied, providing a robust safeguard that substantially improves the trustworthiness of LLM agents.

LLM-based agents execute multi-step tasks, but their behavioral structure remains opaque: long unstructured traces resist the safety auditing and runtime monitoring that deployment requires. Existing approaches operate per-trace or success-only, so they miss the cross-run topology that links next-step and failure prediction. To recover that shared structure, we collapse an entire trace corpus into a single, compact finite-state machine (FSM) that serves as a structural substrate for the otherwise unpredictable behavior of LLM agents. Across twelve public datasets, the FSMs are compact (7-43 states), replay held-out data at >=0.997 fitness with near-identical topology across splits, and build in milliseconds. This substrate addresses both prediction goals. For next-step prediction, FSM-state context outperforms Agent Workflow Memory on every ground-truth-matched dataset. For failure prediction, per-state behavioral features reach held-out AUROC up to 0.94, and an online monitor ranks failing runs above passing ones from a partial trace, triggering early stopping well before completion. Behavioral topology thus appears shaped more by the deployment harness than by the LLM, providing a model-agnostic structural primitive for safety auditing and runtime monitoring.

As autonomous AI agents are used in regulated and safety-critical settings, organizations need effective ways to turn policy into enforceable controls. We introduce a regulatory machine learning framework that converts unstructured design artifacts (like PRDs, TDDs, and code) into verifiable runtime guardrails. Our Policy as Prompt method reads these documents and risk controls to build a source-linked policy tree. This tree is then compiled into lightweight, prompt-based classifiers for real-time runtime monitoring. The system is built to enforce least privilege and data minimization. For conformity assessment, it provides complete provenance, traceability, and audit logging, all integrated with a human-in-the-loop review process. Evaluations show our system reduces prompt-injection risk, blocks out-of-scope requests, and limits toxic outputs. It also generates auditable rationales aligned with AI governance frameworks. By treating policies as executable prompts (a policy-as-code for agents), this approach enables secure-by-design deployment, continuous compliance, and scalable AI safety and AI security assurance for regulatable ML.

Large Language Models (LLMs) show promise in generating firmware for embedded systems, but often introduce security flaws and fail to meet real-time performance constraints. This paper proposes a three-phase methodology that combines LLM-based firmware generation with automated security validation and iterative refinement in a virtualized environment. Using structured prompts, models like GPT-4 generate firmware for networking and control tasks, deployed on FreeRTOS via QEMU. These implementations are tested using fuzzing, static analysis, and runtime monitoring to detect vulnerabilities such as buffer overflows (CWE-120), race conditions (CWE-362), and denial-of-service threats (CWE-400). Specialized AI agents for Threat Detection, Performance Optimization, and Compliance Verification collaborate to improve detection and remediation. Identified issues are categorized using CWE, then used to prompt targeted LLM-generated patches in an iterative loop. Experiments show a 92.4\% Vulnerability Remediation Rate (37.3\% improvement), 95.8\% Threat Model Compliance, and 0.87 Security Coverage Index. Real-time metrics include 8.6ms worst-case execution time and 195μs jitter. This process enhances firmware security and performance while contributing an open-source dataset for future research.

Machine learning (ML) inference platforms are tasked with balancing two competing goals: ensuring high throughput given many requests, and delivering low-latency responses to support interactive applications. Unfortunately, existing platform knobs (e.g., batch sizes) fail to ease this fundamental tension, and instead only enable users to harshly trade off one property for the other. This paper explores an alternate strategy to taming throughput-latency tradeoffs by changing the granularity at which inference is performed. We present Apparate, a system that automatically applies and manages early exits (EEs) in ML models, whereby certain inputs can exit with results at intermediate layers. To cope with the time-varying overhead and accuracy challenges that EEs bring, Apparate repurposes exits to provide continual feedback that powers several novel runtime monitoring and adaptation strategies. Apparate lowers median response latencies by 40.5--91.5% and 10.0--24.2% for diverse CV and NLP classification workloads, and median time-per-token latencies by 22.6--77.9% for generative scenarios, without affecting throughputs or violating tight accuracy constraints.

Large Language Models (LLMs) have exploded a new heatwave of AI, for their ability to engage end-users in human-level conversations with detailed and articulate answers across many knowledge domains. In response to their fast adoption in many industrial applications, this survey concerns their safety and trustworthiness. First, we review known vulnerabilities of the LLMs, categorising them into inherent issues, intended attacks, and unintended bugs. Then, we consider if and how the Verification and Validation (V&V) techniques, which have been widely developed for traditional software and deep learning models such as convolutional neural networks, can be integrated and further extended throughout the lifecycle of the LLMs to provide rigorous analysis to the safety and trustworthiness of LLMs and their applications. Specifically, we consider four complementary techniques: falsification and evaluation, verification, runtime monitoring, and ethical use. Considering the fast development of LLMs, this survey does not intend to be complete (although it includes 300 references), especially when it comes to the applications of LLMs in various domains, but rather a collection of organised literature reviews and discussions to support the quick understanding of the safety and trustworthiness issues from the perspective of V&V.

Malware is becoming increasingly complex and widespread, making it essential to develop more effective and timely detection methods. Traditional static analysis often fails to defend against modern threats that employ code obfuscation, polymorphism, and other evasion techniques. In contrast, behavioral malware detection, which monitors runtime activities, provides a more reliable and context-aware solution. In this work, we propose BEACON, a novel deep learning framework that leverages large language models (LLMs) to generate dense, contextual embeddings from raw sandbox-generated behavior reports. These embeddings capture semantic and structural patterns of each sample and are processed by a one-dimensional convolutional neural network (1D CNN) for multi-class malware classification. Evaluated on the Avast-CTU Public CAPE Dataset, our framework consistently outperforms existing methods, highlighting the effectiveness of LLM-based behavioral embeddings and the overall design of BEACON for robust malware classification.

Emerging AR-LLM-based Social Engineering attack (e.g., SEAR) is at the edge of posing great threats to real-world social life. In such AR-LLM-SE attack, the attacker can leverage AR (Augmented Reality) glass to capture the image and vocal information of the target, using the LLM to identify the target and generate the social profile, using the LLM agents to apply social engineering strategies for conversation suggestion to win the target trust and perform phishing afterwards. Current defensive approaches, such as role-based access control or data flow tracking, are not directly applicable to the convergent AR-LLM ecosystem (considering embedded AR device and opaque LLM inference), leaving an emerging and potent social engineering threat that existing privacy paradigms are ill-equipped to address. This necessitates a shift beyond solely human-centric measures like legislation and user education toward enforceable vendor policies and platform-level restrictions. Realizing this vision, however, faces significant technical challenges: securing resource-constrained AR-embedded devices, implementing fine-grained access control within opaque LLM inferences, and governing adaptive interactive agents. To address these challenges, we present UNSEEN, a coordinated cross-stack defense that combines an AR ACL (Access Control Layer) for identity-gated sensing, F-RMU-based LLM unlearning for sensitive profile suppression, and runtime agent guardrails for adaptive interaction control. We evaluate UNSEEN in an IRB-approved user study with 60 participants and a dataset of 360 annotated conversations across realistic social scenarios.

The Model Context Protocol (MCP) has emerged as a standardized interface enabling seamless integration between Large Language Models (LLMs) and external data sources and tools. While MCP significantly reduces development complexity and enhances agent capabilities, its openness and extensibility introduce critical security vulnerabilities that threaten system trustworthiness and user data protection. This paper systematically analyzes the security landscape of MCP-based systems, identifying three principal threat categories: (1) agent hijacking attacks stemming from protocol design deficiencies; (2) traditional web vulnerabilities in MCP servers; and (3) supply chain security. To address these challenges, we comprehensively survey existing defense strategies, examining both proactive server-side scanning approaches, ranging from layered detection pipelines and agentic auditing frameworks to zero-trust registry systems, and runtime interaction monitoring solutions that provide continuous oversight and policy enforcement. Our analysis reveals that MCP security fundamentally represents a paradigm shift where the attack surface extends from traditional code execution to semantic interpretation of natural language metadata, necessitating novel defense mechanisms tailored to this unique threat model.

LLM-based software engineering agents are increasingly used in real-world development tasks, often with access to sensitive data or security-critical codebases. Such agents could intentionally sabotage these codebases if they were misaligned. We investigate asynchronous monitoring, in which a monitoring system reviews agent actions after the fact. Unlike synchronous monitoring, this approach does not impose runtime latency, while still attempting to disrupt attacks before irreversible harm occurs. We treat monitor development as an adversarial game between a blue team (who design monitors) and a red team (who create sabotaging agents). We attempt to set the game rules such that they upper bound the sabotage potential of an agent based on Claude 4.1 Opus. To ground this game in a realistic, high-stakes deployment scenario, we develop a suite of 5 diverse software engineering environments that simulate tasks that an agent might perform within an AI developer's internal infrastructure. Over the course of the game, we develop an ensemble monitor that achieves a 6% false negative rate at 1% false positive rate on a held out test environment. Then, we estimate risk of sabotage at deployment time by extrapolating from our monitor's false negative rate. We describe one simple model for this extrapolation, present a sensitivity analysis, and describe situations in which the model would be invalid. Code is available at: https://github.com/UKGovernmentBEIS/async-control.

A key strength of managed runtimes over hardware is the ability to gain detailed insight into the dynamic execution of programs with instrumentation. Analyses such as code coverage, execution frequency, tracing, and debugging, are all made easier in a virtual setting. As a portable, low-level bytecode, WebAssembly offers inexpensive in-process sandboxing with high performance. Yet to date, Wasm engines have not offered much insight into executing programs, supporting at best bytecode-level stepping and basic source maps, but no instrumentation capabilities. In this paper, we show the first non-intrusive dynamic instrumentation system for WebAssembly in the open-source Wizard Research Engine. Our innovative design offers a flexible, complete hierarchy of instrumentation primitives that support building high-level, complex analyses in terms of low-level, programmable probes. In contrast to emulation or machine code instrumentation, injecting probes at the bytecode level increases expressiveness and vastly simplifies the implementation by reusing the engine's JIT compiler, interpreter, and deoptimization mechanism rather than building new ones. Wizard supports both dynamic instrumentation insertion and removal while providing consistency guarantees, which is key to composing multiple analyses without interference. We detail a fully-featured implementation in a high-performance multi-tier Wasm engine, show novel optimizations specifically designed to minimize instrumentation overhead, and evaluate performance characteristics under load from various analyses. This design is well-suited for production engine adoption as probes can be implemented to have no impact on production performance when not in use.

This paper presents a program logic for reasoning about multithreaded Java-like programs with dynamic thread creation, thread joining and reentrant object monitors. The logic is based on concurrent separation logic. It is the first detailed adaptation of concurrent separation logic to a multithreaded Java-like language. The program logic associates a unique static access permission with each heap location, ensuring exclusive write accesses and ruling out data races. Concurrent reads are supported through fractional permissions. Permissions can be transferred between threads upon thread starting, thread joining, initial monitor entrancies and final monitor exits. In order to distinguish between initial monitor entrancies and monitor reentrancies, auxiliary variables keep track of multisets of currently held monitors. Data abstraction and behavioral subtyping are facilitated through abstract predicates, which are also used to represent monitor invariants, preconditions for thread starting and postconditions for thread joining. Value-parametrized types allow to conveniently capture common strong global invariants, like static object ownership relations. The program logic is presented for a model language with Java-like classes and interfaces, the soundness of the program logic is proven, and a number of illustrative examples are presented.

Current approaches to AI compliance treat conformity as a binary, audit-time verdict rather than a continuous, measurable property of production systems. We argue that this compliance fiction is structurally ill-suited to the requirements of the EU AI Act, which demands ongoing human oversight and the detection of emergent behavioural drift in deployed systems. We introduce governance from metrics, a principle whereby regulatory compliance is derived as a continuous signal from runtime observability rather than from static assessments. Building on this principle, we present govllm, an open-source framework implementing a governance-driven routing architecture in which model selection is determined by accumulated compliance scores rather than by latency or cost alone. Central to our approach is a panel of regulatory judges - LLM evaluators specialised per criterion (EU AI Act, GDPR, ANSSI, accessibility) - whose inter-judge disagreement we reframe not as noise but as a regulatory uncertainty signal warranting human arbitration. We validate this approach through a ground truth corpus of 49 annotated prompt/response pairs across five regulatory criteria, evaluated by four small language models (SLMs, 1.7B-7B parameters) running fully on-premise. Agreement rates range from 51.5% (mistral:7b) to 69.1% (phi4-mini), with no single model dominating across all criteria - empirically motivating the Profile-as-jury design. We further document three structural failure modes in small regulatory judges and a judge-specific position bias that degrades agreement by up to 25 percentage points across three question-order conditions (original, reversed, permuted). govllm is released as open-source software to support reproducible AI governance research.

Agent benchmarks often evaluate only final answers even when agents run on stateful runtimes. We argue this under-specifies what is being evaluated: the proper unit is a declared model-plus-runtime configuration whose failures can occur in evidence acquisition, runtime routing, safety boundaries, or repeated execution. We present ClawProBench, a trace-aware benchmark for runtime-native agent evaluation instantiated on OpenClaw, a live agent runtime with workspace tools and native surfaces for browsing, memory, messaging, scheduling, skills, and subagents. ClawProBench defines two tracks: a 102-scenario full profile with live workspace and native-runtime routing tasks, and a frozen 68-scenario holdout with closed-world JSON output contracts for robust ranking. Trials are scored from execution traces via a safety-gated formula combining correctness, process quality, and efficiency, preserving failure evidence for audit. Our anonymous artifact includes benchmark definitions, scoring code, manifests and sanitized traces. We evaluate 68 configurations on the full profile and 37 on holdout. The top safety-gated average trace score is 0.7671. Native-runtime tasks underperform workspace-live tasks (0.5238 vs. 0.6415). On holdout, pass@k-any outperforms strict three-trial pass (0.6638 vs. 0.2890), while full-profile and holdout rankings show weak alignment (Spearman 0.1300). Rankings based purely on correctness differ substantially from process-aware, safety-gated and strict-pass views. Final-answer leaderboards may hide native-surface weaknesses, one-off successes and trace-local agent failure modes.

Hybrid reasoning systems that combine learned components with model-based inference are increasingly deployed in tool-augmented decision loops, yet their runtime behavior under partial observability and sustained evidence mismatch remains poorly understood. In practice, failures often arise as gradual divergence of internal reasoning dynamics rather than as isolated prediction errors. This work studies runtime stability in hybrid reasoning systems from a Kalman-inspired perspective. We model reasoning as a stochastic inference process driven by an internal innovation signal and introduce cognitive drift as a measurable runtime phenomenon. Stability is defined in terms of detectability, bounded divergence, and recoverability rather than task-level correctness. We propose a runtime stability framework that monitors innovation statistics, detects emerging instability, and triggers recovery-aware control mechanisms. Experiments on multi-step, tool-augmented reasoning tasks demonstrate reliable instability detection prior to task failure and show that recovery, when feasible, re-establishes bounded internal behavior within finite time. These results emphasize runtime stability as a system-level requirement for reliable reasoning under uncertainty.

Loop Engineering is emerging as a practice for organizing development work around coding agents. Instead of writing each prompt by hand, practitioners design loops that monitor progress, assign work, run checks, and decide what the agent should do next. Even with a capable coding agent, a loop may trust a stale progress note, skip needed verification, spend its budget in the wrong direction, or stop before the task is safe to submit. Yet the final outcome of one end-to-end run cannot tell whether success or failure reflects the loop's guidance or the coding agent's ability to carry out the task. We introduce LoopArena, a benchmark for evaluating how well one model can guide a separate coding agent through a long-running task. The model under evaluation is the Controller: after each coding round, it receives a structured summary of the run and instructs a separate, fixed coding agent, the Worker, on what to do or verify next, or decides whether to stop. LoopArena evaluates this ability in three complementary settings that differ in execution scope and cost. Type I scores next-step Loop Contract selection through execution-validated questions without running the Worker at evaluation time. Type II executes repeated control over a selected slice of a full task, while Type III evaluates the paired full task from its original state. On full tasks, the best observed Strict Success Rate is 24.69\%, leaving substantial room for improvement in long-horizon loop control. Across Controllers, the paired reduction in estimated inference cost averages 64.4\%, and Type II produces a similar ordering under the main Core criterion (Spearman's \(ρ=0.9747\)). We release the benchmark data and evaluation code at https://github.com/AMAP-ML/LoopArena .

Vision-language models (VLMs) are now proposed as runtime safety guards for embodied agents in homes and factories. A deployable guard must catch genuinely unsafe situations while avoiding unnecessary intervention on routine but superficially alarming activity, a distinction that binary safety benchmarks obscure. We introduce EgoSafetyBench, an egocentric video benchmark of 1,200 robot-view scenarios annotated at half-second granularity, to evaluate VLMs as streaming guards across two tracks. The situational track (800 scenarios) spans four families, from routine and safe-but-suspicious scenes to obvious and contextual hazards. The visual-channel track (400 scenarios) targets in-scene text-a sign, sticker, or label visible in the scene-that can misrepresent the physical situation, pairing each misleading sign with a truthful version to test both whether a guard flags the text as misleading and whether the text corrupts its physical-safety judgment. Both tracks use contrastive ladders: near-identical scenarios differing only in a single visible deciding cue, so a correct call must hinge on that cue rather than the overall scene type. We evaluate ten open- and closed-source VLMs. We find that while guards reliably recognize videos containing hazards, they often miss specific hazardous moments, particularly contextual hazards. Furthermore, misleading in-scene signs degrade all tested guards: vulnerable models miss up to a third of hazards, while robust models over-intervene on safe content. Matched controls reveal that apparent safety robustness often reflects indiscriminate alarming rather than true physical reasoning.

AI coding agents such as Claude Code and Gemini CLI increasingly extend themselves with third-party skills: markdown packages bundling natural-language instructions, executable scripts, and tool permissions. Because a skill is at once code and agent-facing instruction, it introduces a supply chain dependency whose risk is neither pure code nor pure prompt. Detection tools have never been measured against verified ground truth spanning this hybrid space, leaving their effectiveness unknown and wild-only evaluations biased. We present MalSkillBench, the first runtime-verified benchmark of malicious agent skills: 3,944 malicious skills labeled along a three-dimensional taxonomy of 108 cells. Of these, 3,214 come from a closed-loop Generate-Verify-Feedback pipeline admitting only samples whose malicious behavior fires inside a Docker sandbox under system-call monitoring and an LLM judge; we add 703 in-the-wild and 4,000 matched benign skills. Our measurements are consistent: code injection reaches 94.5% verification yield but prompt injection only 75.8%, the same fragility that later makes it hard to detect; the wild sample is narrow, dominated by one cryptocurrency-theft campaign (86.6% one behavior, 81% from two accounts) with a small but architecturally new tail attacking the agent control plane; the strongest skill-specific detector reaches 98.4% recall on code injection yet collapses on prompt-injection and agent-control attacks, and wild-only scoring swings the ranking by up to 66 recall points; supply-chain scanners and prompt-injection defenses each see only half of a skill, and no combination recovers the code-instruction relationship. Detecting malicious skills therefore requires reasoning jointly over task intent, code, and instructions. We release the dataset, pipeline, baselines, and results.

Agentic AI systems capable of reasoning, planning, and executing actions present fundamentally distinct governance challenges compared to traditional AI models. Unlike conventional AI, these systems exhibit emergent and unexpected behaviors during runtime, introducing novel agent-related risks that cannot be fully anticipated through pre-deployment governance alone. To address this critical gap, we introduce MI9, the first fully integrated runtime governance framework designed specifically for safety and alignment of agentic AI systems. MI9 introduces real-time controls through six integrated components: agency-risk index, agent-semantic telemetry capture, continuous authorization monitoring, Finite-State-Machine (FSM)-based conformance engines, goal-conditioned drift detection, and graduated containment strategies. Operating transparently across heterogeneous agent architectures, MI9 enables the systematic, safe, and responsible deployment of agentic systems in production environments where conventional governance approaches fall short, providing the foundational infrastructure for safe agentic AI deployment at scale. Detailed analysis through a diverse set of scenarios demonstrates MI9's systematic coverage of governance challenges that existing approaches fail to address, establishing the technical foundation for comprehensive agentic AI oversight.

The dominant paradigm treats AI safety as a property to be instilled during model training via RLHF, DPO, or Constitutional AI. We argue this is structurally insufficient for autonomous agents that execute code, mutate files, send messages, and modify databases. Agent safety should be a runtime contract enforced by the harness, and the contract has two complementary faces. The preventive face blocks dangerous actions before they happen via sandboxes, permission gates, output filters, and trajectory monitors. The evidential face requires verifiable proof that good actions actually happened, gating task submission on hard evidence such as test runs, log captures, file diffs, and citation grounding. We ground the position in four lines of public evidence, with row-level protocols and data released in the supplementary JSON files: a survey of 52 documented AI-agent and LLM safety incidents, a false-completion audit with 31 non-contested core cases plus one disputed illustrative case, a trajectory-schema audit of 12 public agent systems and harnesses, and a title-level audit of all 28,560 papers accepted at NeurIPS, ICML, and ICLR 2023-2025 showing a pooled 8-12x imbalance between training-time and deployment-time publication. Two prior communities that needed to enforce safety, computer security and the experimental sciences, converged on runtime contracts with both preventive and evidential elements; agentic AI is now under the same pressure. We formalize an Agent Trajectory Schema and Evidence Chain, state a compositional gating proposition based on standard monitor composition, and outline a research agenda. The right unit of safety in agentic AI is the trajectory-with-checkable-evidence, not the model.

Modern agent systems often suffer from fragmented runtime state: transcripts, tool effects, memory events, workspace placement, branch provenance, and replay evidence are recorded separately and become difficult to inspect or reproduce. OpenRath addresses this issue with a PyTorch-like programming model for multi-agent, multi-session systems. The analogy concerns the role of a central first-class runtime abstraction, not tensor computation. Its core abstraction is Session, the runtime value passed between agents and workflows. A Session is branchable, inspectable, replayable, backend-aware, and composable. It records conversation chunks, sandbox placement, lineage metadata, token usage, pending work, and tool evidence, while defining where memory interactions enter the runtime record. Since this state is carried by the same value used in program execution, fork, merge, and replay become explicit runtime operations rather than states reconstructed from external traces. OpenRath further defines Sandbox, Tool, Agent, Memory, Workflow, and Selector, with Selector turning control flow into runtime-routed decisions. This report presents the programming model, architecture, audited milestones, and evidence protocol. Its claims are limited to controlled runtime properties, while broad quantitative comparisons, live-provider quality, optional-backend availability, and memory quality are left for follow-on evaluation. The central thesis is that Session provides agent systems with a first-class runtime value for auditable composition.

AI agents are increasingly asked to carry out work that spans minutes, hours, or longer. Yet the default model of agent behavior is continuous action: issuing tool calls, refreshing pages, searching for alternatives, or otherwise trying to force progress. This is the wrong approach for many long-running tasks, which are better served by a strategy of sustained attention. Instead, agents should monitor an environment, notice when an external event makes progress possible, then respond promptly without wasting resources while waiting. To measure progress on this class of tasks, we introduce SentinelBench, an open-source benchmark for time-evolving monitoring tasks. SentinelBench contains 100 tasks across 10 synthetic web environments, including email, calendars, finance, professional networking, and entertainment. Each environment exposes a live web interface and replays a scripted sequence of events, requiring agents to navigate and reason about web pages whose state shifts underfoot. SentinelBench measures task completion, reaction time, and resource use, exposing the tradeoff between responsiveness and cost. We report results across three models and two browser-agent harnesses, establishing performance baselines for future comparison and demonstrating how agent design choices can dramatically impact key metrics. Together, these results show that SentinelBench distinguishes meaningful differences in agent behavior.

Language models of code (LMs) work well when the surrounding code in the vicinity of generation provides sufficient context. This is not true when it becomes necessary to use types or functionality defined in another module or library, especially those not seen during training. LMs suffer from limited awareness of such global context and end up hallucinating, e.g., using types defined in other files incorrectly. Recent work tries to overcome this issue by retrieving global information to augment the local context. However, this bloats the prompt or requires architecture modifications and additional training. Integrated development environments (IDEs) assist developers by bringing the global context at their fingertips using static analysis. We extend this assistance, enjoyed by developers, to the LMs. We propose a notion of monitors that use static analysis in the background to guide the decoding. Unlike a priori retrieval, static analysis is invoked iteratively during the entire decoding process, providing the most relevant suggestions on demand. We demonstrate the usefulness of our proposal by monitoring for type-consistent use of identifiers whenever an LM generates code for object dereference. To evaluate our approach, we curate PragmaticCode, a dataset of open-source projects with their development environments. On models of varying parameter scale, we show that monitor-guided decoding consistently improves the ability of an LM to not only generate identifiers that match the ground truth but also improves compilation rates and agreement with ground truth. We find that LMs with fewer parameters, when guided with our monitor, can outperform larger LMs. With monitor-guided decoding, SantaCoder-1.1B achieves better compilation rate and next-identifier match than the much larger text-davinci-003 model. The datasets and code will be released at https://aka.ms/monitors4codegen .

We present Deep Researcher Agent, an open-source framework that enables large language model (LLM) agents to autonomously conduct deep learning experiments around the clock. Unlike existing AI research assistants that focus on paper writing or code generation, our system addresses the full experiment lifecycle: hypothesis formation, code implementation, training execution, result analysis, and iterative refinement. The framework introduces three key innovations: (1) Zero-Cost Monitoring -- a monitoring paradigm that incurs zero LLM API costs during model training by relying solely on process-level checks and log file reads; (2) Two-Tier Constant-Size Memory -- a memory architecture capped at sim5K characters regardless of runtime duration, preventing the unbounded context growth that plagues long-running agents; and (3) Minimal-Toolset Leader-Worker Architecture -- a multi-agent design where each worker agent is equipped with only 3--5 tools, reducing per-call token overhead by up to 73\%. In sustained deployments spanning 30+ days, the framework autonomously completed 500+ experiment cycles across four concurrent research projects, achieving a 52\% improvement over baseline metrics in one project through 200+ automated experiments -- all at an average LLM cost of \$0.08 per 24-hour cycle. Code is available at https://github.com/Xiangyue-Zhang/auto-deep-researcher-24x7.

Improving diesel engine efficiency, reducing emissions, and enabling robust health monitoring have been critical research topics in engine modelling. While recent advancements in the use of neural networks for system monitoring have shown promising results, such methods often focus on component-level analysis, lack generalizability, and physical interpretability. In this study, we propose a novel hybrid framework that combines physics-informed neural networks (PINNs) with deep operator networks (DeepONet) to enable accurate and computationally efficient parameter identification in mean-value diesel engine models. Our method leverages physics-based system knowledge in combination with data-driven training of neural networks to enhance model applicability. Incorporating offline-trained DeepONets to predict actuator dynamics significantly lowers the online computation cost when compared to the existing PINN framework. To address the re-training burden typical of PINNs under varying input conditions, we propose two transfer learning (TL) strategies: (i) a multi-stage TL scheme offering better runtime efficiency than full online training of the PINN model and (ii) a few-shot TL scheme that freezes a shared multi-head network body and computes physics-based derivatives required for model training outside the training loop. The second strategy offers a computationally inexpensive and physics-based approach for predicting engine dynamics and parameter identification, offering computational efficiency over the existing PINN framework. Compared to existing health monitoring methods, our framework combines the interpretability of physics-based models with the flexibility of deep learning, offering substantial gains in generalization, accuracy, and deployment efficiency for diesel engine diagnostics.

We introduce a red-teaming methodology that exposes harder-to-catch attacks for coding-agent monitors, suggesting that current practices may under-elicit attacks and overstate monitor performance. We identify three challenges with current red-teaming. First, mode collapse in attack generation, which we reduce with a novel attack taxonomy for broader coverage. Second, a conceive-execute gap: frontier LLMs can propose strong attack ideas or execute them, but not all at once. We mitigate this by decomposing attack construction into strategy generation, execution, and post-hoc trajectory refinement. Third, manual elicitation is costly to scale, which we address with our semi-automated red-teaming pipeline. Applied to BashArena, an AI control setting for tool-using coding agents, this pipeline produces MonitoringBench, a benchmark of 2,644 attack trajectories for evaluating monitor capabilities and failure modes. Our pipeline produces more diverse and stronger attacks: Opus-4.5 monitor's catch rate falls from 94.9\% on elicited-only Opus attacks to 60.3\% on our best refined attacks, with larger drops for several mid-tier monitors. Attacks optimized against three development monitors generalize to ten held-out monitors, with catch rates generally increasing with monitor capability. Using this benchmark, we provide a snapshot of the current monitor capabilities and find that frontier monitors often detect suspicious actions but fall for persuasion or fail to calibrate suspiciousness scores appropriately, suggesting tractable paths for improvement. MonitoringBench provides both a static benchmark for current tool-use monitors and a reusable methodology for refreshing these evaluations as agents and monitors improve.

With the increasing use of neural policies in control systems, ensuring their safety and reliability has become a critical software engineering task. One prevalent approach to ensuring the safety of neural policies is to deploy programmatic runtime shields alongside them to correct their unsafe commands. However, the programmatic runtime shields synthesized by existing methods are either computationally expensive or insufficiently permissive, resulting in high overhead and unnecessary interventions on the system. To address these challenges, we propose Aegis, a novel framework that synthesizes lightweight and permissive programmatic runtime shields for neural policies. Aegis achieves this by formulating the seeking of a runtime shield as a sketch-based program synthesis problem and proposing a novel method that leverages counterexample-guided inductive synthesis and Bayesian optimization to solve it. To evaluate Aegis and its synthesized shields, we use eight representative control systems and compare Aegis with the current state-of-the-art. Our results show that the programmatic runtime shields synthesized by Aegis can correct all unsafe commands from neural policies, ensuring that the systems do not violate any desired safety properties at all times. Compared to the current state-of-the-art, Aegis's shields exhibit a 2.2times reduction in time overhead and a 3.9times reduction in memory usage, suggesting that they are much more lightweight. Moreover, Aegis's shields incur an average of 1.5times fewer interventions than other shields, showing better permissiveness.

Understanding the dynamic behavior of computer programs during normal working conditions is an important task, which has multiple security benefits such as the development of behavior-based anomaly detection, vulnerability discovery, and patching. Existing works achieved this goal by collecting and analyzing various data including network traffic, system calls, instruction traces, etc. In this paper, we explore the use of a new type of data, performance counters, to analyze the dynamic behavior of programs. Using existing primitives, we develop a tool named perfextract to capture data from different performance counters for a program during its startup time, thus forming multiple time series to represent the dynamic behavior of the program. We analyze the collected data and develop a semi-supervised clustering algorithm that allows us to classify each program using its performance counter time series into a specific group and to identify the intrinsic behavior of that group. We carry out extensive experiments with 18 real-world programs that belong to 4 groups including web browsers, text editors, image viewers, and audio players. The experimental results show that the examined programs can be accurately differentiated based on their performance counter data regardless of whether programs are run in physical or virtual environments.

Large language model (LLM) agents now execute long, tool-using tasks where final outcome checks can arrive too late for intervention. Online warning requires lightweight prefix monitors over heterogeneous traces, but hand-authored event schemas are brittle and deployment-time LLM judging is costly. We introduce PrefixGuard, a trace-to-monitor framework with an offline StepView induction step followed by supervised monitor training. StepView induces deterministic typed-step adapters from raw trace samples, and the monitor learns an event abstraction and prefix-risk scorer from terminal outcomes. Across WebArena, τ^2-Bench, SkillsBench, and TerminalBench, the strongest PrefixGuard monitors reach 0.900/0.710/0.533/0.557 AUPRC. Using the strongest backend within each representation, they improve over raw-text controls by an average of +0.137 AUPRC. LLM judges remain substantially weaker under the same prefix-warning protocol. We also derive an observability ceiling on score-based area under the precision-recall curve (AUPRC) that separates monitor error from failures lacking evidence in the observed prefix. For finite-state audit, post-hoc deterministic finite automaton (DFA) extraction remains compact on WebArena and τ^2-Bench (29 and 20 states) but expands to 151 and 187 states on SkillsBench and TerminalBench. Finally, first-alert diagnostics show that strong ranking does not imply deployment utility: WebArena ranks well yet fails to support low-false-alarm alerts, whereas τ^2-Bench and TerminalBench retain more actionable early alerts. Together, these results position PrefixGuard as a practical monitor-synthesis recipe with explicit diagnostics for when prefix warnings translate into actionable interventions.

Logs are imperative in the development and maintenance process of many software systems. They record detailed runtime information that allows developers and support engineers to monitor their systems and dissect anomalous behaviors and errors. The increasing scale and complexity of modern software systems, however, make the volume of logs explodes. In many cases, the traditional way of manual log inspection becomes impractical. Many recent studies, as well as industrial tools, resort to powerful text search and machine learning-based analytics solutions. Due to the unstructured nature of logs, a first crucial step is to parse log messages into structured data for subsequent analysis. In recent years, automated log parsing has been widely studied in both academia and industry, producing a series of log parsers by different techniques. To better understand the characteristics of these log parsers, in this paper, we present a comprehensive evaluation study on automated log parsing and further release the tools and benchmarks for easy reuse. More specifically, we evaluate 13 log parsers on a total of 16 log datasets spanning distributed systems, supercomputers, operating systems, mobile systems, server applications, and standalone software. We report the benchmarking results in terms of accuracy, robustness, and efficiency, which are of practical importance when deploying automated log parsing in production. We also share the success stories and lessons learned in an industrial application at Huawei. We believe that our work could serve as the basis and provide valuable guidance to future research and deployment of automated log parsing.

Foundation-model policies for robotic manipulation are advancing rapidly on task success, but rigorous evaluation of whether they succeed safely is still lacking. We introduce ManiGuard, a specification-grounded framework for evaluating and improving the safety of foundation-model manipulation, comprising the ManiGuard-Bench task suite and a paired safety-annotated trajectory-generation pipeline. ManiGuard-Bench organizes six contact-rich household task families into 200 locked base tasks along a skill times constraint taxonomy, with safety specified independently of task success. Each task is evaluated under one in-distribution and four single-axis out-of-distribution perturbations that hold the safety specification fixed, giving 1,000 locked scenarios. Every rollout is runtime-checked by LTL_f-grounded automaton monitors over physics-grounded predicates rather than learned classifiers or LLM judges, in simulation and on a physical Franka platform. The pipeline pairs an automated motion-planning generator with human teleoperation, annotated by the same per-step monitor, and directly supports safety-aware fine-tuning; we release 8,000 safety-annotated demonstrations, 40 per base task. Benchmarking zero-shot and fine-tuned VLAs across more than 23,000 rollouts, we find: (i) safety must be evaluated independently of task success, as 6-21% of successful rollouts violate the specification; (ii) fine-tuning on our suite raises safe task completion from near zero to 7.5-29.8% and engaged-and-safe behavior from 16-40% to 51-72%; but (iii) a gap remains that scaling demonstrations does not close, with 21-42% of engaged rollouts still violating, two of six families below 2% safe success for every policy, and these failures persisting under distribution shift and on hardware.

Tool-using LLM agents face a reliability-cost tradeoff: routing every decision through the LLM improves correctness but incurs high latency and inference cost, while pre-coded workflow graphs reduce cost but become brittle under unanticipated compound tool failures. We present Self-Healing Router, a fault-tolerant orchestration architecture that treats most agent control-flow decisions as routing rather than reasoning. The system combines (i) parallel health monitors that assign priority scores to runtime conditions such as tool outages and risk signals, and (ii) a cost-weighted tool graph where Dijkstra's algorithm performs deterministic shortest-path routing. When a tool fails mid-execution, its edges are reweighted to infinity and the path is recomputed -- yielding automatic recovery without invoking the LLM. The LLM is reserved exclusively for cases where no feasible path exists, enabling goal demotion or escalation. Prior graph-based tool-use systems (ControlLLM, ToolNet, NaviAgent) focus on tool selection and planning; our contribution is runtime fault tolerance with deterministic recovery and binary observability -- every failure is either a logged reroute or an explicit escalation, never a silent skip. Across 19 scenarios spanning three graph topologies (linear pipeline, dependency DAG, parallel fan-out), Self-Healing Router matches ReAct's correctness while reducing control-plane LLM calls by 93% (9 vs 123 aggregate) and eliminating the silent-failure cases observed in a well-engineered static workflow baseline under compound failures.

OpenClaw has rapidly established itself as a leading open-source autonomous agent runtime, offering powerful capabilities including tool integration, local file access, and shell command execution. However, these broad operational privileges introduce critical security vulnerabilities, transforming model errors into tangible system-level threats such as sensitive data leakage, privilege escalation, and malicious third-party skill execution. Existing security measures for the OpenClaw ecosystem remain highly fragmented, addressing only isolated stages of the agent lifecycle rather than providing holistic protection. To bridge this gap, we present ClawKeeper, a real-time security framework that integrates multi-dimensional protection mechanisms across three complementary architectural layers. (1) Skill-based protection operates at the instruction level, injecting structured security policies directly into the agent context to enforce environment-specific constraints and cross-platform boundaries. (2) Plugin-based protection serves as an internal runtime enforcer, providing configuration hardening, proactive threat detection, and continuous behavioral monitoring throughout the execution pipeline. (3) Watcher-based protection introduces a novel, decoupled system-level security middleware that continuously verifies agent state evolution. It enables real-time execution intervention without coupling to the agent's internal logic, supporting operations such as halting high-risk actions or enforcing human confirmation. We argue that this Watcher paradigm holds strong potential to serve as a foundational building block for securing next-generation autonomous agent systems. Extensive qualitative and quantitative evaluations demonstrate the effectiveness and robustness of ClawKeeper across diverse threat scenarios. We release our code.

Heterogeneous CPU-GPU workloads are increasingly used in safety-critical embedded systems, yet no existing approach provides joint attestation of their execution. Prior Control-Flow Attestation (CFA) techniques focus on CPU-side CFA, while GPU attestation is limited to static, load-time verification and does not provide runtime guarantees. As a result, runtime attacks on GPU kernels and violations of the CPU-GPU interaction contract remain unaddressed. We present WarpGuard, the first composite CFA framework for heterogeneous CPU-GPU workloads. WarpGuard verifies execution against a unified control-flow graph (CFG) that captures both CPU and GPU components. It extends prior CFA techniques in two ways: it enables runtime CFA of GPU kernels by tracing their execution against kernel-specific CFGs, and it monitors kernel launch events and enforces per-call site policies to detect violations at the CPU-GPU boundary. These extensions address challenges arising from GPU parallelism and cross-device interactions. We implement WarpGuard using software-based instrumentation, requiring no specialized hardware or binary modifications. Our evaluation on an NVIDIA Jetson Orin Nano shows that WarpGuard detects GPU-side control-flow and cross-boundary attacks. Across microbenchmarks, SPECAccel, and eight TensorRT inference workloads, WarpGuard incurs moderate overheads, suggesting practicality for embedded safety-critical settings.

Containerization, driven by Docker, has transformed application development and deployment by enhancing efficiency and scalability. However, the rapid adoption of container technologies introduces significant security challenges that require careful management. This paper investigates key areas of container security, including runtime protection, network safeguards, configuration best practices, supply chain security, and comprehensive monitoring and logging solutions. We identify common vulnerabilities within these domains and provide actionable recommendations to address and mitigate these risks. By integrating security throughout the Software Development Lifecycle (SDLC), organizations can reinforce their security posture, creating a resilient and reliable containerized application infrastructure that withstands evolving threats.

LLM agents follow a practical execution loop in digital environments: they reason over structured states, invoke tools, inspect feedback, and revise actions. Extending this loop to physical robots is difficult because physical execution is continuous, embodiment-dependent, uncertain, and constrained by safety. Existing embodied-AI systems have advanced manipulation, spatial understanding, navigation, and humanoid control, but these capabilities often remain specialized modules or loosely coupled decision loops. In this work, we introduce HoloAgent-0, a unified embodied agent framework for real-world robot deployment. Embodied AgentOS converts language instructions into executable skill graphs, schedules robot resources, monitors execution, and triggers clarification or re-planning from runtime feedback. HoloAgent-0 organizes heterogeneous robot models and controllers through three coupled layers: Embodied AgentOS for closed-loop execution, 3D spatial memory for physical world grounding, and embodied skills for robot action. We deploy HoloAgent-0 on real hardware and evaluate its spatial memory, long-horizon navigation, and closed-loop execution across motion generation, object search, cross-robot coordination, and mobile manipulation.

We stress test monitoring systems for detecting covert misbehavior in autonomous LLM agents (e.g., secretly sharing private information). To this end, we systematize a monitor red teaming (MRT) workflow that incorporates: (1) varying levels of agent and monitor situational awareness; (2) distinct adversarial strategies to evade the monitor, such as prompt injection; and (3) two datasets and environments -- SHADE-Arena for tool-calling agents and our new CUA-SHADE-Arena, which extends TheAgentCompany, for computer-use agents. We run MRT on existing LLM monitor scaffoldings, which orchestrate LLMs and parse agent trajectories, alongside a new hybrid hierarchical-sequential scaffolding proposed in this work. Our empirical results yield three key findings. First, agent awareness dominates monitor awareness: an agent's knowledge that it is being monitored substantially degrades the monitor's reliability. On the contrary, providing the monitor with more information about the agent is less helpful than expected. Second, monitor scaffolding matters more than monitor awareness: the hybrid scaffolding consistently outperforms baseline monitor scaffolding, and can enable weaker models to reliably monitor stronger agents -- a weak-to-strong scaling effect. Third, in a human-in-the-loop setting where humans discuss with the LLM monitor to get an updated judgment for the agent's behavior, targeted human oversight is most effective; escalating only pre-flagged cases to human reviewers improved the TPR by approximately 15% at FPR = 0.01. Our work establishes a standard workflow for MRT, highlighting the lack of adversarial robustness for LLMs and humans when monitoring and detecting agent misbehavior. We release code, data, and logs to spur further research.

Tool-augmented LLM agents raise new security risks: tool executions can introduce runtime-only behaviors, including prompt injection and unintended exposure of external inputs (e.g., environment secrets or local files). While existing scanners often focus on static artifacts, analyzing runtime behavior is challenging because directly executing untrusted tools can itself be dangerous. We present MCP-SandboxScan, a lightweight framework motivated by the Model Context Protocol (MCP) that safely executes untrusted tools inside a WebAssembly/WASI sandbox and produces auditable reports of external-to-sink exposures. Our prototype (i) extracts LLM-relevant sinks from runtime outputs (prompt/messages and structured tool-return fields), (ii) instantiates external-input candidates from environment values, mounted file contents, and output-surfaced HTTP fetch intents, and (iii) links sources to sinks via snippet-based substring matching. Case studies on three representative tools show that MCP-SandboxScan can surface provenance evidence when external inputs appear in prompt/messages or tool-return payloads, and can expose filesystem capability violations as runtime evidence. We further compare against a lightweight static string-signature baseline and use a micro-benchmark to characterize false negatives under transformations and false positives from short-token collisions.

Large language model (LLM) agents are evolving from request-response assistants into long-running software actors: they maintain state across model calls, fork subtasks, wait for external events, request human authority, generate tools, and perform side effects that must be resumed and audited. This paper presents Agent libOS, a library-OS-inspired runtime substrate for LLM agents. Agent libOS runs above a conventional host operating system; it does not implement hardware drivers, kernel-mode isolation, or a POSIX-compatible operating system. Instead, it treats an agent as an AgentProcess: a schedulable execution subject with process identity, parent-child lineage, lifecycle state, a tool table derived from an AgentImage, typed Object Memory, explicit capabilities, human queues, checkpoints, events, and audit records. Its central design rule is tools are libc-like wrappers; runtime primitives are the authority boundary. Filesystem access, object access, sleeps, human approval, JIT tool registration, and external side effects are checked at primitive boundaries under explicit capabilities and policy. We describe the design, threat model, Python prototype, and safety-oriented evaluation. The current prototype implements async scheduling, namespace-local Object Memory, runtime-integrated human approval, one-shot permission grants, per-process working directories, shell and image-registration primitives, Deno/TypeScript JIT tools over a libOS syscall broker, filesystem/object bridge tools, an injectable Resource Provider Substrate, deterministic demos, real-model smoke scripts, and 123 regression tests at the time of writing. Rather than improving planner accuracy, Agent libOS demonstrates a runtime substrate in which long-running LLM agents can be scheduled, authorized, resumed, and audited without treating tool dispatch as the trust boundary.

Large language models (LLMs) can generate chains of thought (CoTs) that are not always causally responsible for their final outputs. When such a mismatch occurs, the CoT no longer faithfully reflects the decision-critical factors driving the model's behavior, leading to the reduced CoT monitorability problem. However, a comprehensive and fully open-source benchmark for studying CoT monitorability remains lacking. To address this gap, we propose MonitorBench, a systematic benchmark for evaluating CoT monitorability in LLMs. MonitorBench provides: (1) a diverse set of 1,514 test instances with carefully designed decision-critical factors across 19 tasks spanning 7 categories to characterize when CoTs can be used to monitor the factors driving LLM behavior; and (2) two stress-test settings to quantify the extent to which CoT monitorability can be degraded. Extensive experiments across multiple popular LLMs with varying capabilities show that CoT monitorability is higher when producing the final target response requires structural reasoning through the decision-critical factor. Closed-source LLMs generally show lower monitorability, and there exists a negative relationship between monitorability and model capability. Moreover, both open- and closed-source LLMs can intentionally reduce monitorability under stress-tests, with monitorability dropping by up to 30% in some tasks that do not require structural reasoning over the decision-critical factors. Beyond these empirical insights, MonitorBench provides a basis for further research on evaluating future LLMs, studying advanced stress-test monitorability techniques, and developing new monitoring approaches.

Observability into the decision making of modern AI systems may be required to safely deploy increasingly capable agents. Monitoring the chain-of-thought (CoT) of today's reasoning models has proven effective for detecting misbehavior. However, this "monitorability" may be fragile under different training procedures, data sources, or even continued system scaling. To measure and track monitorability, we propose three evaluation archetypes (intervention, process, and outcome-property) and a new monitorability metric, and introduce a broad evaluation suite. We demonstrate that these evaluations can catch simple model organisms trained to have obfuscated CoTs, and that CoT monitoring is more effective than action-only monitoring in practical settings. We compare the monitorability of various frontier models and find that most models are fairly, but not perfectly, monitorable. We also evaluate how monitorability scales with inference-time compute, reinforcement learning optimization, and pre-training model size. We find that longer CoTs are generally more monitorable and that RL optimization does not materially decrease monitorability even at the current frontier scale. Notably, we find that for a model at a low reasoning effort, we could instead deploy a smaller model at a higher reasoning effort (thereby matching capabilities) and obtain a higher monitorability, albeit at a higher overall inference compute cost. We further investigate agent-monitor scaling trends and find that scaling a weak monitor's test-time compute when monitoring a strong agent increases monitorability. Giving the weak monitor access to CoT not only improves monitorability, but it steepens the monitor's test-time compute to monitorability scaling trend. Finally, we show we can improve monitorability by asking models follow-up questions and giving their follow-up CoT to the monitor.

Programmable logic controllers (PLCs) run industrial plants, and large language models can already generate independent program organization units (POUs) for them. Whether such logic integrates into an existing PLC project and then runs correctly has been checked only in limited tests. We present SemaPLC, a project-grounded and verification-gated agent harness assembled from conventional tools but governed by a strict completion rule. Rather than stopping when the model judges its own output adequate, SemaPLC declares a task complete only when logged external checks confirm it. Those checks cover the specification, the compilation, and the behavior on a live runtime. On 117 independent-POU tasks matching existing benchmarks, it attains the highest strict verified pass rate on all seven models (72.6\% mean). On a project-context track of 65 tasks whose generated logic must compile and run inside a real project, it attains the highest mean on integrated compilation, static behavior, and dynamic behavior. Of the three layers, dynamic behavior is the most revealing. We measure it by deploying the generated and the reference logic to a live PLC runtime and comparing their executed traces. All methods fall within 10 static points of one another, whereas dynamic scores separate them sharply, from 22.4 to 31.4 for the baselines against 52.2 for SemaPLC. Overall, our verification-gated harness raises the mean at every layer and most sharply at runtime. Execution, not static scoring, is the faithful test of whether generated control logic actually works. SemaPLC is open-sourced at https://github.com/midea-ai/SemaPLC.

Runtime energy management has become quintessential for multi-sensor autonomous systems at the edge for achieving high performance given the platform constraints. Typical for such systems, however, is to have their controllers designed with formal guarantees on safety that precede in priority such optimizations, which in turn limits their application in real settings. In this paper, we propose a novel energy optimization framework that is aware of the autonomous system's safety state, and leverages it to regulate the application of energy optimization methods so that the system's formal safety properties are preserved. In particular, through the formal characterization of a system's safety state as a dynamic processing deadline, the computing workloads of the underlying models can be adapted accordingly. For our experiments, we model two popular runtime energy optimization methods, offloading and gating, and simulate an autonomous driving system (ADS) use-case in the CARLA simulation environment with performance characterizations obtained from the standard Nvidia Drive PX2 ADS platform. Our results demonstrate that through a formal awareness of the perceived risks in the test case scenario, energy efficiency gains are still achieved (reaching 89.9%) while maintaining the desired safety properties.

Time-series anomaly detectors are commonly compared on workstation-class hardware under unconstrained execution. In-vehicle monitoring, however, requires predictable latency and stable behavior under limited CPU parallelism. Accuracy-only leaderboards can therefore misrepresent which methods remain feasible under deployment-relevant constraints. We present ECoLAD (Efficiency Compute Ladder for Anomaly Detection), a deployment-oriented evaluation protocol instantiated as an empirical study on proprietary automotive telemetry (anomaly rate {approx}0.022) and complementary public benchmarks. ECoLAD applies a monotone compute-reduction ladder across heterogeneous detector families using mechanically determined, integer-only scaling rules and explicit CPU thread caps, while logging every applied configuration change. Throughput-constrained behavior is characterized by sweeping target scoring rates and reporting (i) coverage (the fraction of entities meeting the target) and (ii) the best AUC-PR achievable among measured ladder configurations satisfying the target. On constrained automotive telemetry, lightweight classical detectors sustain both coverage and detection lift above the random baseline across the full throughput sweep. Several deep methods lose feasibility before they lose accuracy.

Automatic detection and prevention of open-set failures are crucial in closed-loop robotic systems. Recent studies often struggle to simultaneously identify unexpected failures reactively after they occur and prevent foreseeable ones proactively. To this end, we propose Code-as-Monitor (CaM), a novel paradigm leveraging the vision-language model (VLM) for both open-set reactive and proactive failure detection. The core of our method is to formulate both tasks as a unified set of spatio-temporal constraint satisfaction problems and use VLM-generated code to evaluate them for real-time monitoring. To enhance the accuracy and efficiency of monitoring, we further introduce constraint elements that abstract constraint-related entities or their parts into compact geometric elements. This approach offers greater generality, simplifies tracking, and facilitates constraint-aware visual programming by leveraging these elements as visual prompts. Experiments show that CaM achieves a 28.7% higher success rate and reduces execution time by 31.8% under severe disturbances compared to baselines across three simulators and a real-world setting. Moreover, CaM can be integrated with open-loop control policies to form closed-loop systems, enabling long-horizon tasks in cluttered scenes with dynamic environments.

Monitoring is an important aspect of safely deploying Large Language Models (LLMs). This paper examines activation probes for detecting ``high-stakes'' interactions -- where the text indicates that the interaction might lead to significant harm -- as a critical, yet underexplored, target for such monitoring. We evaluate several probe architectures trained on synthetic data, and find them to exhibit robust generalization to diverse, out-of-distribution, real-world data. Probes' performance is comparable to that of prompted or finetuned medium-sized LLM monitors, while offering computational savings of six orders-of-magnitude. These savings are enabled by reusing activations of the model that is being monitored. Our experiments also highlight the potential of building resource-aware hierarchical monitoring systems, where probes serve as an efficient initial filter and flag cases for more expensive downstream analysis. We release our novel synthetic dataset and the codebase at https://github.com/arrrlex/models-under-pressure.

Long-horizon agents can fail even when their underlying models can solve the constituent steps. They may lose track of mutable state, fail to reactivate lessons from earlier executions, skip known procedures, or stop prematurely. We bet on harness scaling to improve the execution system around an agent without changing its model weights. We introduce StateM, an agent-native runtime that organizes execution around durable states, phase-local context, checked transitions, recoverable runbooks, and versioned procedural practices that agents and users can inspect together. On Terminal-Bench 2.1, StateM raises GPT-5.5 xhigh to 92.1\%, versus 83.1\% reference and GPT-5.6 Sol Ultra at 91.9\%. The runbook transfers unchanged to GPT-5.6. With GPT-5.6 Sol xhigh, StateM reaches 95.3\% raw accuracy across 445 trials and succeeds on all 89 tasks at least once. The frozen profile raises GPT-5.6 Luna from 76.7 to 85.4\%, above the 84.9\% Sol xhigh reference. Using the same runtime, runbook structure, and golden rules, less than \38 of adaptation raises DeepSeek-V4 Flash from 82.7 to 88.1% under standard timeouts and to 89.1% on an 88-task common core. Extending only the remaining latency-sensitive task matches the reported 88.8% GPT-5.6 Sol max result. Final-score API usage is about 15 versus \574.68 for the GPT reference; total DeepSeek expenditure is 52.22. On BusinessBench, family-specific runbooks built on development sets yield held-out gains of 0.55 macro and 1.34 micro points; two mechanism-matched families improve by 10.04 points. Concrete rules generalize when tasks share execution structure, while the control methodology applies broadly. StateM turns selected postmortem findings into persistent, executable preconditions and practices, making learned controls explicit and enforceable through stateful controls. Code at github.com/henryqin1997/statem.

LLM agents are rapidly evolving from coding assistants into autonomous software engineering systems. However, existing evaluation methodologies remain largely centered on static, isolated, and short-horizon benchmarks that fail to capture the dynamic complexity of real-world production workflows. As a result, benchmark performance may poorly reflect practical capability under realistic runtime environments involving long execution chains, tool interactions, dependency management, and iterative feedback loops. We thus present RAMP, a production-grounded infrastructure for assessing long-horizon software engineering agents. Built upon the YatCC integrated platform, RAMP provides a unified runtime assessment architecture through standardized orchestration and execution interfaces. RAMP introduces realistic compiler-construction workloads with serial dependencies and complex toolchain interactions, together with a staged recovery mechanism for analyzing execution behavior under partial workflow failure. The framework further incorporates utility-oriented multi-dimensional metrics that jointly evaluate outcome quality and process efficiency. We conduct runtime assessments across 15 mainstream models and observe substantial capability degradation that remains largely invisible to conventional isolated benchmarks. Task completion rates progressively collapse across serial workflows, dropping from 100% in the initial stage to only 20% in the final stage, while none of the evaluated models successfully completes the entire pipeline. Runtime analysis reveals systematic failure propagation and significant resource inefficiencies, with computational costs differing by up to three orders of magnitude among comparable models. These findings suggest RAMP advances agentic model evaluation toward continuous, runtime-observable, and production-grounded assessment.

Despite the emergence of diffusion large language models (D-LLMs) as an alternative to autoregressive large language models (AR-LLMs), safety monitoring for D-LLMs remains largely unexplored. Unlike AR-LLMs, D-LLMs generate text through a multi-step denoising process, exposing intermediate hidden representations that may contain safety-relevant information unavailable in standard single-step monitoring setups. Motivated by the suitability of lightweight probes for always-on monitoring, we analyze which trajectory-level signals best indicate when such probes are likely to struggle. We find that the most informative signal is safety hesitation: intermediate hidden states repeatedly falling within a small margin of the probe's decision boundary. The number of such hesitation steps in D-LLM's trajectory predicts probe failure effectively, providing a proxy of sample difficulty. Building on this analysis, we propose D^2-Monitor, a bi-level safety monitor for D-LLMs. D^2-Monitor adopts a lightweight probe as an always-on monitor to jointly estimate hesitation and perform base classification. When the hesitation level exceeds a threshold, a more expressive but computationally heavier probe is activated. This dynamic routing mechanism allocates monitoring resources efficiently at test time. Evaluated on 3 datasets (WildguardMix, ToxicChat, OpenAI-Moderation) across 4 D-LLMs, D^2-Monitor achieves state-of-the-art performance with a compact parameter footprint (leq 0.85M parameters), and exhibits the best trade-off between effectiveness and efficiency relative to 8 baselines.

Large language models (LLMs) are leading significant progress in code generation. Beyond one-pass code generation, recent works further integrate unit tests and program verifiers into LLMs to iteratively refine the generated programs. However, these works consider the generated programs as an indivisible entity, which falls short for LLMs in debugging the programs, especially when the programs contain complex logic flows and data operations. In contrast, when human developers debug programs, they typically set breakpoints and selectively examine runtime execution information. The execution flow and the intermediate variables play a crucial role in the debugging process, yet they are underutilized in the existing literature on code generation. In this study, we introduce Large Language Model Debugger (LDB), a novel debugging framework that enables LLMs to refine their generated programs with the runtime execution information. Specifically, LDB segments the programs into basic blocks and tracks the values of intermediate variables after each block throughout the runtime execution. This allows LLMs to concentrate on simpler code units within the overall execution flow, verify their correctness against the task description block by block, and efficiently pinpoint any potential errors. Experiments demonstrate that LDB consistently enhances the baseline performance by up to 9.8% across the HumanEval, MBPP, and TransCoder benchmarks, archiving new state-of-the-art performance in code debugging for various LLM selections.

Enterprise agents must follow long-horizon, conditional, safety-critical standard operating procedures (SOPs). We compile machine-readable SOP constraints into executable pseudo-code and run them with a program-guided (PG) stack machine that pages the active frame while an LLM performs semantic execution. A three-arm SOPBench study across six models separates representation from runtime: compiled text never significantly hurts and gains up to 16.0 points where official prose underperforms. Runtime guidance is capability-gated. Two strong models independently show positive seven-domain PG contrasts (58:19 and 75:31 discordant pairs), whereas weak models are harmed. A full-program cursor ablation (active frame first, complete program retained) recovers much of the strong-model refusal gain; selective visibility adds a smaller improvement. Paired probe and audit measurements track this divide to spontaneous state discipline rather than reconstruction ability. On Bank the three primary arms rise from 70.4 to 86.4 to 92.8, with 100% refusal correctness. Practical guidance: compile first; enable active-frame paging only after a model-level discipline check.

Computer-use agents (CUAs) increasingly operate in runtimes that combine visual desktop control, command-line execution, code editing, browsers, and external tools. Existing benchmarks, however, often evaluate these interfaces as separable capabilities, leaving long-horizon cross-interface orchestration under-tested. Thus, we introduce WeaveBench, a long-horizon hybrid-interface benchmark with 114 tasks across 8 real-world work domains, grounded in real user requests and publicly verifiable artifacts. Each task requires agents to combine GUI observations/actions with CLI/code operations within a single trajectory. We evaluate these tasks on a real Ubuntu desktop inside deployed CLI-agent runtimes, augmented with a minimal desktop-control plugin. We also propose a companion trajectory-aware judge that inspects deliverables, files, screenshots, logs, and action traces, while detecting shortcut behaviors such as fabricated visual evidence or hard-coded metrics. Across frontier model-runtime pairings, the best PassRate reaches only 41.2%, showing the benchmark remains far from saturated. The trajectory-aware judge further reveals that outcome-only grading substantially overestimates agent performance. Overall, WeaveBench exposes a critical gap in CUA evaluation and provides an effective testbed to measure whether agents can orchestrate GUI, CLI, and code operations across long-horizon real-world tasks.

We propose a new frontier: Neural Computers (NCs) -- an emerging machine form that unifies computation, memory, and I/O in a learned runtime state. Unlike conventional computers, which execute explicit programs, agents, which act over external execution environments, and world models, which learn environment dynamics, NCs aim to make the model itself the running computer. Our long-term goal is the Completely Neural Computer (CNC): the mature, general-purpose realization of this emerging machine form, with stable execution, explicit reprogramming, and durable capability reuse. As an initial step, we study whether early NC primitives can be learned solely from collected I/O traces, without instrumented program state. Concretely, we instantiate NCs as video models that roll out screen frames from instructions, pixels, and user actions (when available) in CLI and GUI settings. These implementations show that learned runtimes can acquire early interface primitives, especially I/O alignment and short-horizon control, while routine reuse, controlled updates, and symbolic stability remain open. We outline a roadmap toward CNCs around these challenges. If overcome, CNCs could establish a new computing paradigm beyond today's agents, world models, and conventional computers.

Agent Skills package reusable instructions and assets for tool-using language-model agents. Progressive loading creates failure boundaries poorly represented by session-, model-, or tool-centric traces: a Skill can be discovered but not activated, activated without instructions, or appear successful without an independently verified outcome. We present Skill Runtime Intelligence, a passive runtime-intelligence system that reconstructs supported Skill-lifecycle stages across heterogeneous harnesses while preserving unsupported stages as unknown. Its Run Panorama separates immutable events, deterministic relations, inferred diagnoses, and controlled outcomes with four evidence grades; optional trace import and OTLP/HTTP export support existing observability deployments. Across six frozen repository profiles, three coding agents, and seven clean or fault-injected conditions, all 126 executions preserve source worktrees and each correlates to exactly one source session. Yet adapters expose three distinct semantics: no Skill runs; complete runs but no failure-like events; or failure-like events in every operational-failure and clean session. In a seven-template diagnostic study, semantic aliases and Panorama localize the same six non-clean boundaries but differ in exact/status behavior; both Raw views emit a failure status on all 18 clean cases, while Panorama emits none. A known-rule graph conforms to 126/126 frozen contracts, whereas a second model completes only 228/378 calls. These observations motivate executable adapter qualification and show that event presence is not boundary fidelity, composite exact scores mask distinct errors, and model explanations must not overwrite deterministic facts.

Interactive LLM agents are becoming part of daily work, but they do not reliably become easier to work with over time: a correction remembered in one session may still be violated in the next. We study this gap between preference access and preference compliance. In tasks derived from anonymized real-user friction cases, Mem0 memory still leaves 57.5% of applicable preference checks violated. We introduce Test-time Rule Acquisition and Compiled Enforcement (TRACE), a drop-in skill-layer pipeline for coding-agent runtimes that mines user corrections, rewrites them as atomic rules, and compiles them into runtime checks that must pass before an agent completes future tasks. Unlike runtime checks written ahead of time by developers, TRACE skills come from the user's own chat corrections. We evaluate TRACE with simulated user-in-the-loop experiments on ClawArena coding-agent tasks and MemoryArena-derived memory-intensive tasks. On ClawArena, TRACE reduces held-out preference violation from 100.0% to 37.6% on in-distribution tasks and from 100.0% to 2.0% on out-of-distribution tasks. On MemoryArena-derived tasks, TRACE reduces in-distribution violation from 100.0% to 60.5% while matching or exceeding the strongest memory baseline on task pass. These results suggest that compiling corrections into runtime enforcement can address a repeated-friction failure mode that memory alone does not reliably solve, reducing the need for users to restate the same correction across future sessions. Experiment code is available at https://github.com/YujunZhou/TRACE_exp, and the deployable skill is available at https://github.com/YujunZhou/tellonce.

Visible tests are a common gate for LLM-generated code, but passing them does not certify specification correctness. We study a deployment-like monitoring problem: after code has passed public tests, can a weaker LLM verifier identify the residual hidden bugs? We introduce Code Monitor Red Teaming, a monitor-red-teaming protocol that fixes a public-check information boundary while varying generator pressure, verifier scaffolding, and weak-to-strong capability. We instantiate it as CodeMonitorBench, spanning function-level, data-science, and workflow code. Across 71,000 generated candidates, 43,677 pass public tests and 23,081 of those fail hidden tests. Weak verifiers improve with scaffolding and model family, but still miss most hidden bugs at 5% false-positive rate. As a robustness stress test, adversarial public-test-overfit pressure lowers verifier AUROC and raises low-FPR miss rates in most cells. A GLM-5.1 verifier recovers part of the gap under the same evidence boundary; an inferability audit shows that remaining misses mix verifier failures with M1 evidence limits.

Currently, evaluating vision-language models (VLMs) in medical imaging tasks oversimplifies clinical reality by relying on pre-selected 2D images that demand significant manual labor to curate. This setup misses the core challenge of realworld diagnostics: a true clinical agent must actively navigate full 3D volumes across multiple sequences or modalities to gather evidence and ultimately support a final decision. To address this, we propose MEDOPENCLAW, an auditable runtime designed to let VLMs operate dynamically within standard medical tools or viewers (e.g., 3D Slicer). On top of this runtime, we introduce MEDFLOWBENCH, a full-study medical imaging benchmark covering multi-sequence brain MRI and lung CT/PET. It systematically evaluates medical agentic capabilities across viewer-only, tool-use, and open-method tracks. Initial results reveal a critical insight: while state-of-the-art LLMs/VLMs (e.g., Gemini 3.1 Pro and GPT-5.4) can successfully navigate the viewer to solve basic study-level tasks, their performance paradoxically degrades when given access to professional support tools due to a lack of precise spatial grounding. By bridging the gap between static-image perception and interactive clinical workflows, MEDOPENCLAW and MEDFLOWBENCH establish a reproducible foundation for developing auditable, full-study medical imaging agents.

The rapid expansion of capabilities in Large Language Model (LLM) agents has exposed a critical architectural bottleneck: when agents are given access to a flat, monolithic registry of tools, the model must evaluate hundreds or thousands of options simultaneously. This leads to decision-space explosion, context window saturation, and degraded routing accuracy. To address these limitations, this paper presents a hierarchical, skill-based architecture for agentic orchestration. Capabilities are organized as a rooted tree where internal nodes make routing decisions and leaf nodes execute deterministic tasks. The runtime enforces a single-step execution loop governed by a Last-In-First-Out (LIFO) stack, giving the agent a form of memory akin to a Pushdown Automaton, therefore enabling it to track nested execution contexts and resume deterministically from any depth. Capability discovery follows a manifest-driven, lazy-loading protocol: only the immediate children of the active node are loaded, so memory and prompt costs scale with the explored path rather than the global registry. By replacing global memory with localized stack frames, the architecture prevents outputs from one execution branch from leaking into another, establishing the isolation guarantees required for deployment in regulated enterprise environments. We also discuss UPI Help, an AI-powered digital payments support product, as a motivating production deployment context. We provide a mathematical formalization of the orchestration state, detailed algorithmic analysis of the execution loop, and controlled benchmarks comparing flat and hierarchical routing under increasing tool catalogs, multi-step workflow pressure, and visible schema-token exposure per LLM call.

Graph and multi-agent orchestration frameworks make production large language model (LLM) workflows practical, but they do not by themselves solve conversational continuity when users maintain several interdependent objectives. This conceptual systems paper focuses on the high-complexity end of that design space, where goals can be suspended, resumed, revised, and invalidated by actions in other goals. We introduce the Goal-Oriented Dialogue Runtime (GODR), a framework-neutral design pattern that treats goals, task frames, lifecycle state, invalidation rules, and resumption contracts as first-class runtime objects while delegating bounded execution to graph runtimes, agents, tools, or application programming interfaces (APIs). GODR is not proposed as a replacement for workflow graphs in simple guided processes; it is intended for complex, multi-domain, interruptible conversations where objective continuity cannot be recovered reliably from agent identity, chat history, or execution-graph position alone. The paper formalizes the problem, proposes runtime objects and architecture-selection criteria, and frames evaluation as an agenda for future empirical validation rather than as a measured performance claim.

Runtime guardrails are essential for reliable large language model (LLM) deployment, yet existing approaches typically rely on independent, external models that introduce additional inference cost, delayed safety signals, and a capacity mismatch with increasingly capable base models. To address these issues, we introduce SingProbe, a lightweight intrinsic runtime guard that directly reuses hidden states produced during LLM inference and operates alongside autoregressive decoding. Within a unified framework, SingProbe continuously predicts query intent, response safety, and hallucination risk at the token level with negligible additional guardrail inference overhead, offering a "free-lunch" solution. We further introduce SingStreamBench, a benchmark designed to assess whether streaming guardrails remain inactive on benign prefixes while promptly detecting emerging unsafe content. Extensive experiments show that SingProbe achieves competitive or superior performance compared with substantially larger standalone guardrails and specialized hallucination detectors, with only approx2M parameters and <0.5% extra overhead. Beyond passive detection, we also show that SingProbe scores can anticipate future generation risk and guide constrained safe decoding. We further extend this paradigm to medical generation through SingProbe-Med, which selectively activates risk-directed decoding interventions only when clinically relevant risks emerge. Together, these results demonstrate that internal model representations provide an effective and efficient interface for generation-time monitoring and control.

We address the problem of runtime trajectory anomaly detection, a critical capability for enabling trustworthy LLM agents. Current safety measures predominantly focus on static input/output filtering. However, we argue that ensuring LLM agents reliability requires auditing the intermediate execution process. In this work, we formulate the task of Trajectory Anomaly Detection. The goal is not merely detection, but precise error localization. This capability is essential for enabling efficient rollback-and-retry. To achieve this, we construct TrajBench, a dataset synthesized via a perturb-and-complete strategy to cover diverse procedural anomalies. Using this benchmark, we investigate the capability of models in process supervision. We observe that general-purpose LLMs, even with zero-shot prompting, struggle to identify and localize these anomalies. This reveals that generalized capabilities do not automatically translate to process reliability. To address this, we propose TrajAD, a specialized verifier trained with fine-grained process supervision. Our approach outperforms baselines, demonstrating that specialized supervision is essential for building trustworthy agents.