Daily Papers

We investigate the geometric structure of learning dynamics in overparameterized transformer models through carefully controlled modular arithmetic tasks. Our primary finding is that despite operating in high-dimensional parameter spaces (d=128), transformer training trajectories rapidly collapse onto low-dimensional execution manifolds of dimension 3--4. This dimensional collapse is robust across random seeds and moderate task difficulties, though the orientation of the manifold in parameter space varies between runs. We demonstrate that this geometric structure underlies several empirically observed phenomena: (1) sharp attention concentration emerges as saturation along routing coordinates within the execution manifold, (2) SGD commutators are preferentially aligned with the execution subspace (up to 10times random baseline) early in training, with >92% of non-commutativity confined to orthogonal staging directions and this alignment decreasing as training converges, and (3) sparse autoencoders capture auxiliary routing structure but fail to isolate execution itself, which remains distributed across the low-dimensional manifold. Our results suggest a unifying geometric framework for understanding transformer learning, where the vast majority of parameters serve to absorb optimization interference while core computation occurs in a dramatically reduced subspace. These findings have implications for interpretability, training curriculum design, and understanding the role of overparameterization in neural network learning.

Current state-of-the-art paradigms predominantly treat Text-to-Motion (T2M) generation as a direct translation problem, mapping symbolic language directly to continuous poses. While effective for simple actions, this System 1 approach faces a fundamental theoretical bottleneck we identify as the Semantic-Kinematic Impedance Mismatch: the inherent difficulty of grounding semantically dense, discrete linguistic intent into kinematically dense, high-frequency motion data in a single shot. In this paper, we argue that the solution lies in an architectural shift towards Latent System 2 Reasoning. Drawing inspiration from Hierarchical Motor Control in cognitive science, we propose Latent Motion Reasoning (LMR) that reformulates generation as a two-stage Think-then-Act decision process. Central to LMR is a novel Dual-Granularity Tokenizer that disentangles motion into two distinct manifolds: a compressed, semantically rich Reasoning Latent for planning global topology, and a high-frequency Execution Latent for preserving physical fidelity. By forcing the model to autoregressively reason (plan the coarse trajectory) before it moves (instantiates the frames), we effectively bridge the ineffability gap between language and physics. We demonstrate LMR's versatility by implementing it for two representative baselines: T2M-GPT (discrete) and MotionStreamer (continuous). Extensive experiments show that LMR yields non-trivial improvements in both semantic alignment and physical plausibility, validating that the optimal substrate for motion planning is not natural language, but a learned, motion-aligned concept space. Codes and demos can be found in https://chenhaoqcdyq.github.io/LMR/{https://chenhaoqcdyq.github.io/LMR/}

We propose a new approach for generative modeling based on training a neural network to be idempotent. An idempotent operator is one that can be applied sequentially without changing the result beyond the initial application, namely f(f(z))=f(z). The proposed model f is trained to map a source distribution (e.g, Gaussian noise) to a target distribution (e.g. realistic images) using the following objectives: (1) Instances from the target distribution should map to themselves, namely f(x)=x. We define the target manifold as the set of all instances that f maps to themselves. (2) Instances that form the source distribution should map onto the defined target manifold. This is achieved by optimizing the idempotence term, f(f(z))=f(z) which encourages the range of f(z) to be on the target manifold. Under ideal assumptions such a process provably converges to the target distribution. This strategy results in a model capable of generating an output in one step, maintaining a consistent latent space, while also allowing sequential applications for refinement. Additionally, we find that by processing inputs from both target and source distributions, the model adeptly projects corrupted or modified data back to the target manifold. This work is a first step towards a ``global projector'' that enables projecting any input into a target data distribution.

While decoupled control schemes for legged mobile manipulators have shown robustness, learning holistic whole-body control policies for tracking global end-effector poses remains fragile against Out-of-Distribution (OOD) inputs induced by sensor noise or infeasible user commands. To improve robustness against these perturbations without sacrificing task performance and continuity, we propose Competence Manifold Projection (CMP). Specifically, we utilize a Frame-Wise Safety Scheme that transforms the infinite-horizon safety constraint into a computationally efficient single-step manifold inclusion. To instantiate this competence manifold, we employ a Lower-Bounded Safety Estimator that distinguishes unmastered intentions from the training distribution. We then introduce an Isomorphic Latent Space (ILS) that aligns manifold geometry with safety probability, enabling efficient O(1) seamless defense against arbitrary OOD intents. Experiments demonstrate that CMP achieves up to a 10-fold survival rate improvement in typical OOD scenarios where baselines suffer catastrophic failure, incurring under 10% tracking degradation. Notably, the system exhibits emergent ``best-effort'' generalization behaviors to progressively accomplish OOD goals by adhering to the competence boundaries. Result videos are available at: https://shepherd1226.github.io/CMP.

The dominant paradigm for building LLM based agents is the Agent Loop, an iterative cycle where a single language model decides what to do next by reading an ever growing context window. This paradigm has three structural weaknesses: implicit dependencies between steps, unbounded recovery loops, and mutable execution history that complicates debugging. We characterize the Agent Loop as a single ready unit scheduler: at any moment, at most one executable unit is active, and the choice of which unit to activate comes from opaque LLM inference rather than an inspectable policy. This perspective places Agent Loops and graph based execution engines on a single semantic continuum. We propose SGH, Structured Graph Harness, which lifts control flow from implicit context into an explicit static DAG. SGH makes three commitments: execution plans are immutable within a plan version, planning execution and recovery are separated into three layers, and recovery follows a strict escalation protocol. These choices trade some expressiveness for controllability, verifiability, and implementability. Our contributions are fourfold: a scheduler unified framework that applies classical scheduling theory to LLM agent execution and identifies challenges introduced by non deterministic LLM nodes; a trade off analysis of controllability, expressiveness, and implementability across 70 surveyed systems; a formal specification including a node state machine with termination and soundness guarantees; and an attributable experimental framework with a seven group design for future validation. This is a position paper and design proposal. We provide a theoretical framework, design analysis, and experimental protocol, not a production implementation or empirical results.

LLM-based agents for program repair are increasingly built on a "generate-run-revise" paradigm, iteratively executing tests to evaluate and refine patches. This execution-based approach has become standard practice in state-of-the-art systems. However, executions can be time-consuming and expensive, yet their impact on these agents remains underexplored. In this paper, we conduct a two-stage empirical study over execution behavior in LLM-based program repair. To characterize execution behavior at scale, we first analyze 7,745 agent traces from SWE-bench leaderboard submissions. Second, we evaluate 3,000 end-to-end repair attempts across 200 SWE-bench instances and three agents (Claude Code, Codex, and the open-source OpenCode) under four execution paradigms, which allows for a fine-grained comparison of performance and cost. Our analysis reveals three key observations: (1) Code execution is used across all agents and models analyzed, with an average of 8.8 test runs per task. Execution behavior varies substantially across agents and models, with frequency ranging from 2 to 19 per task, and late-stage executions consistently achieve higher success rates than early-stage ones. (2) Execution restrictions have little effect on repair success: on commercial agents with SOTA models the resolve-rate gap between Prohibited and Unrestricted is only 1.25 percentage points and not statistically significant, while Prohibited saves substantial token and wall-clock cost. (3) Execution benefit is concentrated rather than uniform. These patterns suggest that current agents apply execution indiscriminately, paying its cost on instances where it provides little benefit. Execution, therefore, should be treated as a resource with an explicit cost-benefit tradeoff, not a default capability.

Drawing motivation from the manifold hypothesis, which posits that most high-dimensional data lies on or near low-dimensional manifolds, we apply manifold learning to the space of neural networks. We learn manifolds where datapoints are neural networks by introducing a distance between the hidden layer representations of the neural networks. These distances are then fed to the non-linear dimensionality reduction algorithm PHATE to create a manifold of neural networks. We characterize this manifold using features of the representation, including class separation, hierarchical cluster structure, spectral entropy, and topological structure. Our analysis reveals that high-performing networks cluster together in the manifold, displaying consistent embedding patterns across all these features. Finally, we demonstrate the utility of this approach for guiding hyperparameter optimization and neural architecture search by sampling from the manifold.

Existing tool-augmented large language models (LLMs) encounter significant challenges when processing complex queries. Current frameworks such as ReAct are prone to local optimization traps due to their reliance on incremental decision-making processes. To address these limitations, we propose a novel Planner-centric Plan-Execute paradigm that fundamentally resolves local optimization bottlenecks through architectural innovation. Central to our approach is a novel Planner model that performs global Directed Acyclic Graph (DAG) planning for complex queries, enabling optimized execution beyond conventional tool coordination. We also introduce ComplexTool-Plan, a large-scale benchmark dataset featuring complex queries that demand sophisticated multi-tool composition and coordination capabilities. Additionally, we develop a two-stage training methodology that integrates Supervised Fine-Tuning (SFT) with Group Relative Policy Optimization (GRPO), systematically enhancing the Planner's tool selection accuracy and global planning awareness through structured DAG-based planning. When integrated with a capable executor, our framework achieves state-of-the-art performance on the StableToolBench benchmark for complex user queries, demonstrating superior end-to-end execution capabilities and robust handling of intricate multi-tool workflows.

Coding agent infrastructure is shifting from harness engineering toward loop engineering as coding agents are deployed for sustained long-horizon software development. Existing benchmarks often center on localized tasks or end-state outcomes, offering limited insight into sustained execution. We introduce LOOPSBENCH, a long-horizon benchmark for loop engineering in coding agent evaluation. Each task is a dependency DAG over separately testable development units with source-evidenced prerequisite edges. LOOPSBENCH comprises 112 tasks from authentic sources spanning 8 programming languages and 9 domains. Its flow-aware runtime releases tests along the ready frontier and retains completed nodes as regression obligations. We evaluate frontier coding agents paired with widely used loop implementations. The strongest configuration, Opus-4.7 with Claude Code and outer continuation, resolves 25.00% of tasks. Recorded plans recover only part of the source-recovered prerequisite DAG, and regression events remain visible across the evaluated loop profiles. We open source the benchmark data and code, including all tasks, more than 5,300 development units, and executable tests, at microsoft/Loopsbench.

LLM agents are increasingly deployed as executable systems that use tools, modify workspaces, and produce concrete artifacts. In such workflows, performance depends not only on the base model, but also on the harness: the system layer that manages context, tools, state, constraints, permissions, tracing, and recovery. However, existing benchmarks typically abstract away execution, compare complete agent systems, or hold the harness fixed, making execution-layer variation difficult to study. We introduce Harness-Bench, a diagnostic benchmark for evaluating configuration-level harness effects in realistic agent workflows. Harness-Bench evaluates representative harness configurations across multiple model backends under shared task environments, budgets, and evaluation protocols, while preserving each harness's native execution behavior. The benchmark contains 106 sandboxed offline tasks constructed from practical agent-use patterns and manually reviewed for realism, solvability, oracle-checkability, and integrity. Each run records final artifacts, execution traces, usage statistics, and validator outputs, enabling analysis beyond final completion. Across 5,194 execution trajectories, we observe substantial variation in completion, process quality, efficiency, and failure behavior across model-harness pairings. These results suggest that agent capability should be reported at the model-harness configuration level rather than attributed to the base model alone. Our analysis further identifies recurring execution-alignment failures, where plausible reasoning becomes decoupled from tool feedback, workspace state, evidence, or verifiable output contracts. Harness-Bench provides a reproducible foundation for diagnosing and improving reliable, efficient, and auditable agent execution stacks.

Normalizing Flows explicitly maximize a full-dimensional likelihood on the training data. However, real data is typically only supported on a lower-dimensional manifold leading the model to expend significant compute on modeling noise. Injective Flows fix this by jointly learning a manifold and the distribution on it. So far, they have been limited by restrictive architectures and/or high computational cost. We lift both constraints by a new efficient estimator for the maximum likelihood loss, compatible with free-form bottleneck architectures. We further show that naively learning both the data manifold and the distribution on it can lead to divergent solutions, and use this insight to motivate a stable maximum likelihood training objective. We perform extensive experiments on toy, tabular and image data, demonstrating the competitive performance of the resulting model.

Existing benchmarks for LLM coding agents primarily evaluate final outcomes. While useful for measuring overall capability, these metrics provide limited visibility and often miss defects that arise during execution. We present ProcCtrlBench, a benchmark for execution-process evaluation in LLM coding agents. ProcCtrlBench organizes recurrent execution defects into a reusable ontology covering 11 defect types in 4 categories, and evaluates agent trajectories through standardized process evidence rather than final outcomes alone. To support comparison across heterogeneous agents, ProcCtrlBench standardizes raw logs into a unified trajectory representation and reports calibrated scorecards over process-level findings. In addition, ProcCtrlBench uses control preservation as a way to quantify execution-process quality, capturing whether execution remains interpretable, interruptible, correctable, reversible, and able to hand back authority when needed. We evaluate ProcCtrlBench on 200 cases sampled from three benchmarks: AndroidBench, TerminalBench, and SWE-bench-Verified. Results show that ProcCtrlBench can be instantiated with useful reliability, provides more stable semantics than direct thresholding, and reveals meaningful differences in execution quality that are often overlooked by conventional outcome-based evaluation.

Long-horizon agents can fail even when their underlying models can solve the constituent steps. They may lose track of mutable state, fail to reactivate lessons from earlier executions, skip known procedures, or stop prematurely. We bet on harness scaling to improve the execution system around an agent without changing its model weights. We introduce StateM, an agent-native runtime that organizes execution around durable states, phase-local context, checked transitions, recoverable runbooks, and versioned procedural practices that agents and users can inspect together. On Terminal-Bench 2.1, StateM raises GPT-5.5 xhigh to 92.1\%, versus 83.1\% reference and GPT-5.6 Sol Ultra at 91.9\%. The runbook transfers unchanged to GPT-5.6. With GPT-5.6 Sol xhigh, StateM reaches 95.3\% raw accuracy across 445 trials and succeeds on all 89 tasks at least once. The frozen profile raises GPT-5.6 Luna from 76.7 to 85.4\%, above the 84.9\% Sol xhigh reference. Using the same runtime, runbook structure, and golden rules, less than \38 of adaptation raises DeepSeek-V4 Flash from 82.7 to 88.1% under standard timeouts and to 89.1% on an 88-task common core. Extending only the remaining latency-sensitive task matches the reported 88.8% GPT-5.6 Sol max result. Final-score API usage is about 15 versus \574.68 for the GPT reference; total DeepSeek expenditure is 52.22. On BusinessBench, family-specific runbooks built on development sets yield held-out gains of 0.55 macro and 1.34 micro points; two mechanism-matched families improve by 10.04 points. Concrete rules generalize when tasks share execution structure, while the control methodology applies broadly. StateM turns selected postmortem findings into persistent, executable preconditions and practices, making learned controls explicit and enforceable through stateful controls. Code at github.com/henryqin1997/statem.

Intelligent agents progress by continually refining their capabilities through actively exploring environments. Yet robot policies often lack sufficient exploration capability due to action mode collapse. Existing methods that encourage exploration typically rely on random perturbations, which are unsafe and induce unstable, erratic behaviors, thereby limiting their effectiveness. We propose Self-Improvement via On-Manifold Exploration (SOE), a framework that enhances policy exploration and improvement in robotic manipulation. SOE learns a compact latent representation of task-relevant factors and constrains exploration to the manifold of valid actions, ensuring safety, diversity, and effectiveness. It can be seamlessly integrated with arbitrary policy models as a plug-in module, augmenting exploration without degrading the base policy performance. Moreover, the structured latent space enables human-guided exploration, further improving efficiency and controllability. Extensive experiments in both simulation and real-world tasks demonstrate that SOE consistently outperforms prior methods, achieving higher task success rates, smoother and safer exploration, and superior sample efficiency. These results establish on-manifold exploration as a principled approach to sample-efficient policy self-improvement. Project website: https://ericjin2002.github.io/SOE

Computer-use agents (CUAs) increasingly operate in runtimes that combine visual desktop control, command-line execution, code editing, browsers, and external tools. Existing benchmarks, however, often evaluate these interfaces as separable capabilities, leaving long-horizon cross-interface orchestration under-tested. Thus, we introduce WeaveBench, a long-horizon hybrid-interface benchmark with 114 tasks across 8 real-world work domains, grounded in real user requests and publicly verifiable artifacts. Each task requires agents to combine GUI observations/actions with CLI/code operations within a single trajectory. We evaluate these tasks on a real Ubuntu desktop inside deployed CLI-agent runtimes, augmented with a minimal desktop-control plugin. We also propose a companion trajectory-aware judge that inspects deliverables, files, screenshots, logs, and action traces, while detecting shortcut behaviors such as fabricated visual evidence or hard-coded metrics. Across frontier model-runtime pairings, the best PassRate reaches only 41.2%, showing the benchmark remains far from saturated. The trajectory-aware judge further reveals that outcome-only grading substantially overestimates agent performance. Overall, WeaveBench exposes a critical gap in CUA evaluation and provides an effective testbed to measure whether agents can orchestrate GUI, CLI, and code operations across long-horizon real-world tasks.

We demonstrate CEDAR, an application for automating data science (DS) tasks with an agentic setup. Solving DS problems with LLMs is an underexplored area that has immense market value. The challenges are manifold: task complexities, data sizes, computational limitations, and context restrictions. We show that these can be alleviated via effective context engineering. We first impose structure into the initial prompt with DS-specific input fields, that serve as instructions for the agentic system. The solution is then materialized as an enumerated sequence of interleaved plan and code blocks generated by separate LLM agents, providing a readable structure to the context at any step of the workflow. Function calls for generating these intermediate texts, and for corresponding Python code, ensure that data stays local, and only aggregate statistics and associated instructions are injected into LLM prompts. Fault tolerance and context management are introduced via iterative code generation and smart history rendering. The viability of our agentic data scientist is demonstrated using canonical Kaggle challenges.

A significant gap exists between theory and practice in deep learning. Generalization and approximation error bounds are often derived for simplified models or are too loose to be informative. Many rely on the manifold hypothesis and on geometric regularity such as intrinsic dimension, curvature, and reach. Progress requires insight into data-manifold geometry and suitable benchmarks, yet existing options are polarized: analytic manifolds with known geometry but limited applicability, or real-world datasets where geometry is only coarsely estimable. We introduce a benchmarking framework for studying data geometry. We repurpose and extend dSprites and COIL-20 with additional transformation dimensions and dense, axis-aligned sampling, and pair them with finite-difference estimators that recover curvature, reach, and volume at near-ground-truth accuracy in a regime where general-purpose estimators are unreliable or difficult to deploy. The framework is intended as a controlled testbed, useful as a calibration environment for geometric estimators and a sandbox for probing theoretical assumptions. To illustrate its use, we present two application studies, namely assessing the scaling behavior of the bounds of Genovese et al. and Fefferman et al., and tracking the layer-wise geometry of a β-VAE, highlighting the behavior of current bounds and the value of controlled benchmarks for guiding and validating future theory. A reference implementation is available at https://github.com/koulakis/manifold-microscope.

Large language model (LLM)-based systems are becoming increasingly popular for solving tasks by constructing executable workflows that interleave LLM calls, information retrieval, tool use, code execution, memory updates, and verification. This survey reviews recent methods for designing and optimizing such workflows, which we treat as agentic computation graphs (ACGs). We organize the literature based on when workflow structure is determined, where structure refers to which components or agents are present, how they depend on each other, and how information flows between them. This lens distinguishes static methods, which fix a reusable workflow scaffold before deployment, from dynamic methods, which select, generate, or revise the workflow for a particular run before or during execution. We further organize prior work along three dimensions: when structure is determined, what part of the workflow is optimized, and which evaluation signals guide optimization (e.g., task metrics, verifier signals, preferences, or trace-derived feedback). We also distinguish reusable workflow templates, run-specific realized graphs, and execution traces, separating reusable design choices from the structures actually deployed in a given run and from realized runtime behavior. Finally, we outline a structure-aware evaluation perspective that complements downstream task metrics with graph-level properties, execution cost, robustness, and structural variation across inputs. Our goal is to provide a clear vocabulary, a unified framework for positioning new methods, a more comparable view of existing body of literature, and a more reproducible evaluation standard for future work in workflow optimizations for LLM agents.

Software engineering, whether performed by humans or by AI agents, requires reasoning about how software behaves. We call the internal model that supports such reasoning the software world model, and view current code-execution benchmarks as covering one well-studied slice of it -- control flow. In this paper, we take a step toward a broader evaluation by shifting the observable axis to execution resources: alongside test outcome and exception class, we predict peak memory, wall-clock time, and ranked profiler outputs at method and line granularity. We use SWE-bench Verified as the source of data to hold the test close to real-world software engineering tasks. All tested models, frontier ones included, show modest performance and brittle behaviour, suggesting a notable lack of understanding of how software is executed, as opposed to how its source code is written.

LLM agents are rapidly evolving from coding assistants into autonomous software engineering systems. However, existing evaluation methodologies remain largely centered on static, isolated, and short-horizon benchmarks that fail to capture the dynamic complexity of real-world production workflows. As a result, benchmark performance may poorly reflect practical capability under realistic runtime environments involving long execution chains, tool interactions, dependency management, and iterative feedback loops. We thus present RAMP, a production-grounded infrastructure for assessing long-horizon software engineering agents. Built upon the YatCC integrated platform, RAMP provides a unified runtime assessment architecture through standardized orchestration and execution interfaces. RAMP introduces realistic compiler-construction workloads with serial dependencies and complex toolchain interactions, together with a staged recovery mechanism for analyzing execution behavior under partial workflow failure. The framework further incorporates utility-oriented multi-dimensional metrics that jointly evaluate outcome quality and process efficiency. We conduct runtime assessments across 15 mainstream models and observe substantial capability degradation that remains largely invisible to conventional isolated benchmarks. Task completion rates progressively collapse across serial workflows, dropping from 100% in the initial stage to only 20% in the final stage, while none of the evaluated models successfully completes the entire pipeline. Runtime analysis reveals systematic failure propagation and significant resource inefficiencies, with computational costs differing by up to three orders of magnitude among comparable models. These findings suggest RAMP advances agentic model evaluation toward continuous, runtime-observable, and production-grounded assessment.

Agents often repeatedly solve similar task instances from scratch, leading to unnecessary reasoning cost and long execution traces. Prior work has explored workflow reuse and executable skill induction, but it remains unclear which task scenarios admit procedural skills and how the shared procedural structure should be represented across successful traces. We study this problem in FSM-defined scenarios, where successful traces can be viewed as paths in an unknown transition graph, and formulate procedural skills as reusable parameterized control-flow subgraphs. Based on this view, we introduce SkillDisCo, a distillation-and-compilation framework that distills reusable PFSM subgraphs from successful traces and compiles them into callable, executable, and verifiable procedural skills. Experiments on ALFWorld and WebArena show that SkillDisCo improves success rates and reduces agent turns across benchmarks and model scales, demonstrating the benefits of representing shared experience as reusable execution structures.

We introduce Riemannian Lyapunov Optimizers (RLOs), a family of optimization algorithms that unifies classic optimizers within one geometric framework. Unlike heuristic improvements to existing optimizers, RLOs are systematically derived from a novel control-theoretic framework that reinterprets optimization as an extended state discrete-time controlled dynamical system on a Riemannian parameter manifold. Central to this framework is the identification of a Normally Attracting Invariant Manifold (NAIM), which organizes training dynamics into two distinct stages: rapid alignment of the speed state to a target graph, followed by controlled evolution within it. We formalize this by constructing a strict Lyapunov function that certifies convergence to a target manifold. This perspective yields a constructive ``optimizer generator" that not only recovers classic algorithms but enables the principled design of RLOs. We validate our theory via geometric diagnostics and demonstrate that grounding optimizer design in control theory yields state-of-the-art performance in large-scale benchmarks. Overall, RLOs bridge control theory and modern machine learning optimization, providing a unified language and a systematic toolkit for designing stable, effective optimizers.

With the advancement of multimodal large language models (MLLMs) and coding agents, the website development has shifted from manual programming to agent-based project-level code synthesis. Existing benchmarks rely on idealized assumptions, especially for well-structured, information-rich inputs and static execution settings. In contrast, real-world development is constrained by a critical bottleneck: the semantic misalignment between ambiguous, low-quality instructions from non-expert users and model understanding, which results in a failure mode that we term blind execution. To address this gap, we introduce InteractWeb-Bench, the first multimodal interactive benchmark for website generation under non-expert low-code user conditions. InteractWeb-Bench introduces four types of user agents and persona-driven instruction perturbations to systematically simulate diverse user behaviors, including ambiguity, redundancy, and contradiction, grounded in requirement engineering defect taxonomies. We develop an interactive execution environment for agents, featuring a unified action space comprising Clarify, Implement, Verify, and Submit, enabling iterative intent refinement, code synthesis, and visual feedback-based validation. Extensive experiments and analysis reveal that frontier MLLM-based agents remain trapped in blind execution, exposing limitations in intent recognition and adaptive interaction.

Compact language models (LMs) reduce cost, latency, and deployment risk for tool agents. Yet MCP-style tool use requires more than isolated function calling: an agent must discover tools from live catalogs, satisfy schemas, preserve dependencies across intermediate outputs, and ground final responses in executed evidence. Small planners often generate plausible workflow graphs that fail under tool resolution, parameter validation, dependency tracking, or execution. We argue that this failure mode is poorly handled by small-corpus distillation. A few hundred teacher traces can teach workflow format, but rarely cover the recovery behavior needed to repair failed plans over changing tool catalogs. We introduce Evoflux, an inference-time evolutionary search method that treats compact tool use as the repair of executable tool workflows. It evolves typed workflow graphs through structured edits, execution feedback, adaptive intensity, meta-guided redesign, and diversity pruning. On held-out MCP-Bench tasks spanning live MCP servers and 250 tools, Evoflux raises execution feasibility from roughly 3% to 17-24% across small planners. In contrast, SFT and SFT+DPO on the same search-mined data match, underperform, or collapse below zero-shot performance; ReAct reaches higher peaks, but with higher variance and token cost. These results show that execution-grounded search is more reliable under scarce teacher-trace budgets.

Agentic LLM frameworks that rely on prompted orchestration, where the model itself determines workflow transitions, often suffer from hallucinated routing, infinite loops, and non-reproducible execution. We introduce GraphBit, an engine-orchestrated framework that defines workflows explicitly and deterministically as a directed acyclic graph (DAG). Unlike prompted orchestration, agents in GraphBit operate as typed functions, while a Rust-based engine governs routing, state transitions, and tool invocation, ensuring reproducibility and auditability. The engine supports parallel branch execution, conditional control flow over structured state predicates, and configurable error recovery. A three-tier memory architecture consisting of ephemeral scratch space, structured state, and external connectors isolates context across stages, preventing cascading context bloat that degrades reasoning in long-running pipelines. Across GAIA benchmark tasks spanning zero-tool, document-augmented, and web-enabled workflows, GraphBit outperforms six existing frameworks, achieving the highest accuracy (67.6 percent), zero framework-induced hallucinations, the lowest latency (11.9 ms overhead), and the highest throughput. Ablation studies demonstrate that each memory tier contributes measurably to performance, with deterministic execution providing the greatest gains on tool-intensive tasks representative of real-world deployments.

Diffusion and flow models have become the dominant paradigm for generative modeling on Riemannian manifolds, with successful applications in protein backbone generation and DNA sequence design. However, these methods require tens to hundreds of neural network evaluations at inference time, which can become a computational bottleneck in large-scale scientific sampling workflows. We introduce Riemannian MeanFlow~(RMF), a framework for learning flow maps directly on manifolds, enabling high-quality generations with as few as one forward pass. We derive three equivalent characterizations of the manifold average velocity (Eulerian, Lagrangian, and semigroup identities), and analyze parameterizations and stabilization techniques to improve training on high-dimensional manifolds. In promoter DNA design and protein backbone generation settings, RMF achieves comparable sample quality to prior methods while requiring up to 10times fewer function evaluations. Finally, we show that few-step flow maps enable efficient reward-guided design through reward look-ahead, where terminal states can be predicted from intermediate steps at minimal additional cost.

Generalization, the ability to perform well beyond the training context, is a hallmark of biological and artificial intelligence, yet anticipating unseen failures remains a central challenge. Conventional approaches often take a ``bottom-up'' mechanistic route by reverse-engineering interpretable features or circuits to build explanatory models. While insightful, these methods often struggle to provide the high-level, predictive signals for anticipating failure in real-world deployment. Here, we propose using a ``top-down'' approach to studying generalization failures inspired by medical biomarkers: identifying system-level measurements that serve as robust indicators of a model's future performance. Rather than mapping out detailed internal mechanisms, we systematically design and test network markers to probe structure, function links, identify prognostic indicators, and validate predictions in real-world settings. In image classification, we find that task-relevant geometric properties of in-distribution (ID) object manifolds consistently forecast poor out-of-distribution (OOD) generalization. In particular, reductions in two geometric measures, effective manifold dimensionality and utility, predict weaker OOD performance across diverse architectures, optimizers, and datasets. We apply this finding to transfer learning with ImageNet-pretrained models. We consistently find that the same geometric patterns predict OOD transfer performance more reliably than ID accuracy. This work demonstrates that representational geometry can expose hidden vulnerabilities, offering more robust guidance for model selection and AI interpretability.

Neural representations carry rich geometric structure; but does that structure causally shape behavior? To address this question, we intervene along paths through activation space defined by different geometries, and measure the behavioral trajectories they induce. In particular, we test whether interventions that respect the geometry of activation space will yield behaviors close to those the model exhibits naturally. Concretely, we first fit an activation manifold M_h to representations and a behavior manifold M_y to output probability distributions. We then test the link M_h leftrightarrow M_y via interventions: we find that steering along M_h, which we term manifold steering, yields behavioral trajectories that follow M_y, while linear steering -- which assumes a Euclidean geometry -- cuts through off-manifold regions and hence produces unnatural outputs. Moreover, optimizing interventions in activation space to produce paths along M_y recovers activation trajectories that trace the curvature of M_h. We demonstrate this bidirectional relationship between the geometry of representation and behavior across tasks and modalities. In language models, we use reasoning tasks with cyclic and sequential geometries as well as in-context learning tasks with more complex graph geometries. In a video world model, we use a task with geometry corresponding to physical dynamics. Overall, our work shows that geometry in neural representation is not merely incidental, but is in fact the proper object for enabling principled control via intervention on internals. This recasts the core problem of steering from finding the right direction to finding the right geometry.

We adapt previous research on category theory and topological unsupervised learning to develop a functorial perspective on manifold learning, also known as nonlinear dimensionality reduction. We first characterize manifold learning algorithms as functors that map pseudometric spaces to optimization objectives and that factor through hierarchical clustering functors. We then use this characterization to prove refinement bounds on manifold learning loss functions and construct a hierarchy of manifold learning algorithms based on their equivariants. We express several popular manifold learning algorithms as functors at different levels of this hierarchy, including Metric Multidimensional Scaling, IsoMap, and UMAP. Next, we use interleaving distance to study the stability of a broad class of manifold learning algorithms. We present bounds on how closely the embeddings these algorithms produce from noisy data approximate the embeddings they would learn from noiseless data. Finally, we use our framework to derive a set of novel manifold learning algorithms, which we experimentally demonstrate are competitive with the state of the art.

k-nearest neighbor (k-NN) search is a fundamental primitive in geometry processing and computer graphics. While spatial partitioning structures such as kd-trees are standard, they are often manifold-blind, failing to exploit the intrinsic low-dimensional structure of points sampled from 2-manifolds. Recent advances in dynamic programming-based nearest neighbor search (DP-NNS) leverage incrementally constructed Voronoi diagrams to accelerate queries, where each site p maintains a list of successors that progressively refine its Voronoi cell. However, DP-NNS is restricted to single nearest neighbor (k=1) searches, precluding their adoption in applications that require local neighborhood statistics. In this paper, we generalize the DP-NNS framework to support arbitrary k-NN queries for manifold-aligned data. Our approach is founded on the geometric observation that if p_i is the nearest neighbor of a query q in P, then the second nearest neighbor of q must reside either within the prefix set P_{1:i-1} = {p_1, \dots, p_{i-1}} or within p_i's successor list. By recursively extending this principle, we introduce Manifold k-NN, a recursive algorithmic scheme that significantly outperforms conventional kd-trees for manifold-aligned data. Our method achieves a 1\times--10\times speedup in volume-to-surface query scenarios and inherently supports dynamic prefix queries -- enabling k-NN searches within any subset P_{1:m} (m \leq n) with zero overhead. Furthermore, we extend the framework to support point deletion via local Delaunay updates, providing a complete suite of dynamic operations for point set modification. Comprehensive experiments on diverse geometric datasets demonstrate the efficiency and broad applicability of our approach for modern graphics pipelines. Source code is available at https://github.com/sssomeone/manifold-knn.

Large language models generate plausible code but cannot verify correctness. Existing multi-agent systems simulate execution or leave verification optional. We introduce execution-grounded verification as a first-class principle: every code change must survive sandboxed execution before propagation. We instantiate this principle in AGENTFORGE, a multi-agent framework where Planner, Coder, Tester, Debugger, and Critic agents coordinate through shared memory and a mandatory Docker sandbox. We formalize software engineering with LLMs as an iterative decision process over repository states, where execution feedback provides a stronger supervision signal than next-token likelihood. AGENTFORGE achieves 40.0\% resolution on SWE-BENCH Lite, outperforming single-agent baselines by 26--28 points. Ablations confirm that execution feedback and role decomposition each independently drive performance. The framework is open-source at https://github.com/raja21068/AutoCodeAI.

Advances in large language models have enabled agentic AI systems that can reason, plan, and interact with external tools to execute multi-step workflows, while public blockchains have evolved into a programmable substrate for value transfer, access control, and verifiable state transitions. Their convergence introduces a high-stakes systems challenge: designing standard, interoperable, and secure interfaces that allow agents to observe on-chain state, formulate transaction intents, and authorize execution without exposing users, protocols, or organizations to unacceptable security, governance, or economic risks. This survey systematizes the emerging landscape of agent-blockchain interoperability through a systematic literature review, identifying 317 relevant works from an initial pool of over 3000 records. We contribute a five-part taxonomy of integration patterns spanning read-only analytics, simulation and intent generation, delegated execution, autonomous signing, and multi-agent workflows; a threat model tailored to agent-driven transaction pipelines that captures risks ranging from prompt injection and policy misuse to key compromise, adversarial execution dynamics, and multi-agent collusion; and a comparative capability matrix analyzing more than 20 representative systems across 13 dimensions, including custody models, permissioning, policy enforcement, observability, and recovery. Building on the gaps revealed by this analysis, we outline a research roadmap centered on two interface abstractions: a Transaction Intent Schema for portable and unambiguous goal specification, and a Policy Decision Record for auditable, verifiable policy enforcement across execution environments. We conclude by proposing a reproducible evaluation suite and benchmarks for assessing the safety, reliability, and economic robustness of agent-mediated on-chain execution.

Robotic instruction following tasks require seamless integration of visual perception, task planning, target localization, and motion execution. However, existing task planning methods for instruction following are either data-driven or underperform in zero-shot scenarios due to difficulties in grounding lengthy instructions into actionable plans under operational constraints. To address this, we propose FlowPlan, a structured multi-stage LLM workflow that elevates zero-shot pipeline and bridges the performance gap between zero-shot and data-driven in-context learning methods. By decomposing the planning process into modular stages--task information retrieval, language-level reasoning, symbolic-level planning, and logical evaluation--FlowPlan generates logically coherent action sequences while adhering to operational constraints and further extracts contextual guidance for precise instance-level target localization. Benchmarked on the ALFRED and validated in real-world applications, our method achieves competitive performance relative to data-driven in-context learning methods and demonstrates adaptability across diverse environments. This work advances zero-shot task planning in robotic systems without reliance on labeled data. Project website: https://instruction-following-project.github.io/.

Large language models are increasingly applied to various development scenarios. However, in on-chain transaction scenarios, even a minor error can cause irreversible loss for users. Existing evaluations often overlook execution accuracy and safety. We introduce EVM-QuestBench, an execution-grounded benchmark for natural-language transaction-script generation on EVM-compatible chains. The benchmark employs dynamic evaluation: instructions are sampled from template pools, numeric parameters are drawn from predefined intervals, and validators verify outcomes against these instantiated values. EVM-QuestBench contains 107 tasks (62 atomic, 45 composite). Its modular architecture enables rapid task development. The runner executes scripts on a forked EVM chain with snapshot isolation; composite tasks apply step-efficiency decay. We evaluate 20 models and find large performance gaps, with split scores revealing persistent asymmetry between single-action precision and multi-step workflow completion. Code: https://anonymous.4open.science/r/bsc_quest_bench-A9CF/.

Web agents act through long interaction sequences, yet existing benchmarks evaluate only terminal success, discarding all process information and offering little guidance on improvement. In this work, we conduct a process-level analysis of web agents. We introduce WebStep, a benchmark of 1,800 task instances with controlled difficulty and automatic semantic state tracking. Each website exposes a deterministic semantic MDP alongside the GUI: the agent operates on the interface, while the environment records high-level states and transitions in the background, enabling fine-grained analysis without manual annotation. Based on the semantic trajectory, we first show that process metrics reveal differences invisible to outcome evaluation: three agents whose success rates cluster within 31-33% diverge in exploration reach versus execution accuracy. Then, decomposing by skill characterizes the nature of these differences, exposing opposite per-skill rankings hidden within the same website: e.g., on Housing, OpenAI CUA outperforms Qwen3.5 by 23.7% on commit actions yet underperforms it by 15.6% on filtering, pinpointing a concrete skill to improve even within a domain. Bifurcation analysis further localizes the decisive error that loses the task and shows that this error is agent-specific rather than shared. Finally, these differences widen as tasks grow harder: success rate is similar on easy tasks but separates sharply as exploration becomes more demanding. Our process-level analysis opens a new avenue in web agent evaluation, providing fine-grained and actionable insight into where and how each agent should be improved.

In Agentic AI, Large Language Models (LLMs) are increasingly used in the orchestration layer to coordinate multiple agents and to interact with external services, retrieval components, and shared memory. In this setting, failures are not limited to incorrect final outputs. They also arise from long-horizon interaction, stochastic decisions, and external side effects (such as API calls, database writes, and message sends). Common failures include non-termination, role drift, propagation of unsupported claims, and attacks via untrusted context or external channels. This paper presents an assurance framework for such Agentic AI systems. Executions are instrumented as Message-Action Traces (MAT) with explicit step and trace contracts. Contracts provide machine-checkable verdicts, localize the first violating step, and support deterministic replay. The framework includes stress testing, formulated as a budgeted counterexample search over bounded perturbations. It also supports structured fault injection at service, retrieval, and memory boundaries to assess containment under realistic operational faults and degraded conditions. Finally, governance is treated as a runtime component, enforcing per-agent capability limits and action mediation (allow, rewrite, block) at the language-to-action boundary. To support comparative evaluations across stochastic seeds, models, and orchestration configurations, the paper defines trace-based metrics for task success, termination reliability, contract compliance, factuality indicators, containment rate, and governance outcome distributions. More broadly, the framework is intended as a common abstraction to support testing and evaluation of multi-agent LLM systems, and to facilitate reproducible comparison across orchestration designs and configurations.

The development of general-purpose agents requires a shift from executing simple instructions to completing complex, real-world productivity workflows. However, current tool-use benchmarks remain misaligned with real-world requirements, relying on AI-generated queries, dummy tools, and limited system-level coordination. To address this, we propose GTA-2, a hierarchical benchmark for General Tool Agents (GTA) spanning atomic tool use and open-ended workflows. Built on real-world authenticity, it leverages real user queries, deployed tools, and multimodal contexts. (i) GTA-Atomic, inherited from our prior GTA benchmark, evaluates short-horizon, closed-ended tool-use precision. (ii) GTA-Workflow introduces long-horizon, open-ended tasks for realistic end-to-end completion. To evaluate open-ended deliverables, we propose a recursive checkpoint-based evaluation mechanism that decomposes objectives into verifiable sub-goals, enabling unified evaluation of both model capabilities and agent execution frameworks (i.e., execution harnesses). Experiments reveal a pronounced capability cliff: while frontier models already struggle on atomic tasks (below 50%), they largely fail on workflows, with top models achieving only 14.39% success. Further analysis shows that checkpoint-guided feedback improves performance, while advanced frameworks such as Manus and OpenClaw substantially enhance workflow completion, highlighting the importance of execution harness design beyond the underlying model capacity. These findings provide guidance for developing reliable personal and professional assistants. Dataset and code will be available at https://github.com/open-compass/GTA.

Production LLMs receive instructions from sources with very different levels of trust, yet attend to every token with uniform architectural privilege. This is the structural vulnerability that enables malicious prompt injections and, more broadly, leaves models without a principled way to resolve conflicts between legitimate but competing instructions. A common training-based response is to teach models an explicit instruction hierarchy; existing approaches, however, formalize hierarchies of only three or four levels, treat all violations as equally severe, and rarely evaluate the full set of pairwise level interactions. We formalize a k-level instruction hierarchy problem and instantiate it for k=5, yielding ten pairwise priority relations that a compliant model must enforce. We then introduce Gravity-Weighted DPO (GW-DPO), a preference-optimization objective whose per-sample offset scales with the structural distance between conflicting levels under a linear or bilateral schedule, the latter weighting severity by both the privilege gap and the privilege of the victim level. Combined with hierarchy-specific delimiter tokens (Chen et al., 2025) and Instructional Segment Embeddings (ISE; Wu et al., 2025), GW-DPO with the bilateral schedule Pareto-improves over standard DPO and the linear variant on Llama-3.1-8B-Instruct, raising macro pairwise priority adherence while keeping over-refusal at half the standard DPO rate. Ablations isolate ISE as a refusal-threshold calibrator and recast five- versus three-level training as a generality-specialization tradeoff.

Exploitation is not a binary event. It is a ladder of acquiring progressive capabilities, from executing a single buggy line of code to taking full control of the target. However, existing LLM security benchmarks treat a crash as exploitation success. That single binary outcome collapses the hard parts of exploitation: the transition from triggering a bug to constructing reusable primitives and control. We present ExploitBench, a capability-graded benchmark that decomposes exploitation into 16 measurable flags, from coverage and crash through sandbox primitives, arbitrary read/write, control-flow hijack, and arbitrary code execution. Each capability is verified by a deterministic oracle that uses a per-run randomized challenge-response for primitives, differential execution against ground-truth binaries to measure progress, and a signal-handler proof for code execution. We instantiate ExploitBench on 41 V8 bugs because V8 is both widely deployed and exploitation-hardened. We report three arms: <model,env> as the primary measurement of model-environment capability, <model,env, adaptive coaching> as a secondary arm that adds adaptive coaching to test whether targeted feedback shifts outcomes, and <model,env,harness> as an ablation that swaps in the model's native CLI to check whether vendor-side optimizations increase exploitation capabilities. Our results show a sharp capability split between publicly deployed frontier models and the private frontier. Across the 8 publicly deployed models tested, reaching the vulnerable code and triggering a crash is routine, but arbitrary code execution is not. The private model shows arbitrary code execution on approximately half. Overall, results suggest that exploit construction against hardened targets is an emerging frontier capability.

Repository-level fault localization (FL) and automated program repair (APR) require an agent to identify the relevant code units across files, follow call and data dependencies, and generate a valid patch. Existing graph-based systems provide structural representations of repositories (files, classes, functions and their relationships) but do not model how variable values flow within procedures, leaving agents without the semantic precision needed for function- and line-level localization. We present ARISE (Agentic Repository-level Issue Solving Engine), which augments an LLM-based agent with a multi-granularity program graph that extends structural relationships down to statement-level nodes connected by intra-procedural definition-use edges. ARISE exposes this graph through a three-tier tool API, which brings data-flow slicing as a first-class, queryable agent primitive that allows the model to trace, in a single call, which statements define or consume a variable of interest. We evaluate on SWE-bench Lite (300 real GitHub issues, 11 Python repositories) using Qwen2.5-Coder-32B-Instruct as the backbone. Compared to the unmodified SWE-agent baseline, ARISE improves Function Recall@1 by 17.0 points and Line Recall@1 by 15.0 points. These localization gains translate directly into repair success, with ARISE achieving 22.0% Pass@1 (66/300), a 4.7 percentage-point improvement over SWE-agent. Controlled ablations confirm that the improvement is driven by the data-flow graph rather than the tool schema, and that large code models consume structured slice output directly without requiring a natural-language summarization layer. The graph builder and slicing API are designed as a framework-agnostic, drop-in toolset for future APR research.

Tool-augmented LLM agents commonly rely on step-wise atomic tool calls, where each invocation, observation, and value transfer is exposed in the main reasoning trace. This creates an execution-granularity mismatch: locally deterministic tool workflows are unfolded into repeated model-visible decisions, consuming context and forcing the model to manage low-level dataflow in the trace. We introduce HyperTool, a unified executable MCP-style tool interface that changes the model-visible unit of tool execution. A model invokes HyperTool with a code block that can call existing tools through their original schemas, manipulate returned values, and pass intermediate results locally, folding deterministic tool subroutines into a single outer call. To train models to use this interface, we synthesize HyperTool-format trajectories from cross-tool compositional tasks and verify them in real MCP environments. On MCP-Universe, HyperTool improves average accuracy from 15.69\% to 35.29\% on Qwen3-32B and from 9.93\% to 33.33\% on Qwen3-8B, and surpass GPT-OSS and Kimi-k2.5 on average accuracy, showing that our HyperTool can substantially improve multi-step tool use.

We present a machine-checked formalization of structurally governed AI workflow architectures and prove that effect-level governance can be imposed without reducing internal computational expressivity. Using Interaction Trees in Rocq 8.19, we define a governance operator G that mediates all effectful directives, including memory access, external calls, and oracle (LLM) queries. Our development compiles with 0 admitted lemmas and consists of 36 modules, ~12,000 lines of Rocq, and 454 theorems. We establishseven properties: (P1) governed Turing completeness, (P2) governed oracle expressivity, (P3) a decidability boundary in which governance predicates are total and closed under Boolean composition while semantic program properties remain non-trivial and undecidable by governance, (P4) goal preservation for permitted executions, (P5) expressive minimality of primitive capabilities (compute, memory, reasoning, external call, observability), (P6) subsumption asymmetry showing structural governance strictly subsumes content-level filtering, and (P7) semantic transparency: on all executions where governance permits, the governed interpretation is observationally equivalent (modulo governance-only events) to the ungoverned interpretation. Together, these results show that governance and computational expressivity are orthogonal dimensions: governance constrains the effect boundary of programs while remaining semantically transparent to internal computation.

Addressing a structural-engineering request requires more than a single answer; it requires a chain of interdependent artifacts: interpreted requirements, a computable model, validation records, solver outputs, code-check records, and a final report. Evaluations centered on question answering or script generation rarely verify this complete evidence chain and may therefore reward fluent outputs even when the underlying engineering workflow is incomplete, internally inconsistent, or non-executable. To address this limitation, we present StructureClaw, an artifact-centered workbench in which LLM agents operate through governed engineering skills, typed tools, shared artifact state, and local analysis backends. We also introduce StructureClaw-Bench, an executable benchmark of 150 controlled scenarios spanning standard workflow execution, interactive robustness, and multimodal structural-model reconstruction. A scenario succeeds only when all required artifact- and execution-level assertions pass in a single run. Across ten agent-model configurations, each evaluated on the same 50 standard cases, the average Success Rate rises from 56.8% with the generic-skill baseline to 88.6% with the full automatic workflow. The interactive and multimodal evaluations identify two prominent remaining challenges: safe handling of invalid numerical inputs and fixture-consistent reconstruction of structural models. These findings show that artifact-centered evaluation can expose workflow-level failures that are difficult to identify from final responses alone, providing a more rigorous basis for evaluating and improving structural-engineering agents. The code and benchmark are available at https://github.com/structureclaw/structureclaw.

A neural network with the widely-used ReLU activation has been shown to partition the sample space into many convex polytopes for prediction. However, the parameterized way a neural network and other machine learning models use to partition the space has imperfections, e.g., the compromised interpretability for complex models, the inflexibility in decision boundary construction due to the generic character of the model, and the risk of being trapped into shortcut solutions. In contrast, although the non-parameterized models can adorably avoid or downplay these issues, they are usually insufficiently powerful either due to over-simplification or the failure to accommodate the manifold structures of data. In this context, we first propose a new type of machine learning models referred to as Manifoldron that directly derives decision boundaries from data and partitions the space via manifold structure discovery. Then, we systematically analyze the key characteristics of the Manifoldron such as manifold characterization capability and its link to neural networks. The experimental results on 4 synthetic examples, 20 public benchmark datasets, and 1 real-world application demonstrate that the proposed Manifoldron performs competitively compared to the mainstream machine learning models. We have shared our code in https://github.com/wdayang/Manifoldron for free download and evaluation.

Large language models (LLMs) are increasingly asked not only to write static interfaces, but to construct executable interactive worlds from natural language. Browser-native 3D, commonly built with Three.js, is a natural next frontier: generated programs must integrate assets, obey spatial and physical constraints, and keep user-facing controls synchronized with hidden runtime state. Existing web-generation benchmarks and evaluators, however, largely observe only pixels or DOM nodes, while the mechanics of a Three.js world unfold inside an opaque <canvas>. We introduce WorldCoder-Bench, a benchmark for autonomous, physically grounded 3D world synthesis. WorldCoder-Bench contains 2,026 expert-curated tasks across Simulation, Rendering, and Application scenarios, with optional .glb assets and hidden behavioral contracts. We further propose StateProbe, an execution-based protocol that probes generated programs in a sandboxed browser and verifies hidden, mutation-hardened contracts over runtime states and transitions. Beyond verification coverage, we report Return on Automation and Time Efficiency Multiplier to measure correctness-adjusted cost and time savings. Across nine frontier models, the best system reaches only 27.8% verification coverage on WorldCoder-Core and 19.9% on WorldCoder-Robust, with failures dominated by state-schema drift and broken interaction chains rather than missing scene elements. Utility metrics further show that cheap or fast models can still provide substantial value on easier domains. WorldCoder-Bench is available at https://anonymous.4open.science/r/WorldCoder-Bench/.

Large Language Models (LLMs) increasingly act as agents whose procedural knowledge is stored in reusable skill packages and loaded at inference time. As skill libraries grow, a central challenge is to expose the smallest sufficient executable context under a limited context budget. Existing systems struggle to reuse routines below the whole-skill level, preserve procedural contracts during compression, keep compressed routines executable and expandable, and update the compressed library as skills evolve. These challenges reveal a unit mismatch: skills are retrieved as packages, compressed as text, and converted into execution graphs only after retrieval, whereas reliable reuse requires a contract-bearing procedural unit. We propose SkillZip, an execution-aware procedural abstraction framework that performs contract-preserving compression over section-level graphs. SkillZip rewrites recurring contract-valid motifs into reversible ported macros while preserving boundary signatures, dependency closure, verifier reachability, and source-level expansion. At inference time, it hydrates a compact, dependency-closed context and expands macros only when required. ReZip further integrates new skills and revises risky macros using execution evidence. Comprehensive experiments1 on technical and embodied agent benchmarks show SkillZip consistently outperforms the strongest baseline by up to 12.2 points, while achieving a 3.46x compression ratio with 99.2% dependency preservation and 98.7% verifier reachability. Scaling analyses further confirm robust retrieval across skill libraries ranging from 200 to 100K skills.

LLM agents increasingly run inside execution harnesses that dispatch tools, allocate resources, and route messages between specialized components. However, a harness can return a correct, benign answer over a trajectory that accesses unauthorized resources or leaks context to the wrong agent. Output-level evaluation cannot see these failures, yet most safety benchmarks score only final outputs or terminal states, even though many violations occur mid-trajectory rather than at termination. The central question is whether the harness respects user intent, permission boundaries, and information-flow constraints throughout execution. To address this gap, we propose HarnessAudit, a framework that audits full execution trajectories across boundary compliance, execution fidelity, and system stability, with a focus on multi-agent harnesses where these risks are most pronounced. We further introduce HarnessAudit-Bench, a benchmark of 210 tasks across eight real-world domains, instantiated in both single-agent and multi-agent configurations with embedded safety constraints. Evaluating ten harness configurations across frontier models and three multi-agent frameworks, we find that: (i) task completion is misaligned with safe execution, and violations accumulate with trajectory length; (ii) safety risks vary across domains, task types, and agent roles; (iii) most violations concentrate in resource access and inter-agent information transfer; and (iv) multi-agent collaboration expands the safety risk surface, while harness design sets the upper bound of safe deployment.

AI agents are increasingly deployed in multi-tenant cloud environments, where they execute diverse tool calls within sandboxed containers, each call with distinct resource demands and rapid fluctuations. We present a systematic characterization of OS-level resource dynamics in sandboxed AI coding agents, analyzing 144 software engineering tasks from the SWE-rebench benchmark across two LLM models. Our measurements reveal that (1) OS-level execution (tool calls, container and agent initialization) accounts for 56-74% of end-to-end task latency; (2) memory, not CPU, is the concurrency bottleneck; (3) memory spikes are tool-call-driven with a up to 15.4x peak-to-average ratio; and (4) resource demands are highly unpredictable across tasks, runs, and models. Comparing these characteristics against serverless, microservice, and batch workloads, we identify three mismatches in existing resource controls: a granularity mismatch (container-level policies vs. tool-call-level dynamics), a responsiveness mismatch (user-space reaction vs. sub-second unpredictable bursts), and an adaptability mismatch (history-based prediction vs. non-deterministic stateful execution). We propose AgentCgroup, an intent-driven eBPF-based resource controller that exploits agents ability to declare resource needs and reconstruct execution strategies, using hierarchical cgroup structures aligned with tool-call boundaries, in-kernel enforcement via sched_ext and memcg_bpf_ops, and runtime-adaptive policies. Preliminary evaluation demonstrates improved multi-tenant isolation and reduced resource waste. AgentCgroup is open-source at https://github.com/eunomia-bpf/agentcgroup

In this paper we present a comparative study of path feasibility queries generated during path exploration based software engineering methods. Symbolic execution based methods are gaining importance in different aspects of software engineering e.g. proving properties about programs, test case generation, comparing different executions of programs. These methods use SMT solvers to check the satisfiability of path feasibility queries written as a formula in the supported theories. We study the performance of solving such path feasibility queries using SMT solvers for real world programs. Our path condition formulas are generated in a theory of quantifier free bit vectors with arrays (QF_ABV). We show that among the different SMT solvers, STP is better than Z3 by an order of magnitude for such kind of queries. As an application we design a new program analysis (Change Value Analysis) based on our study which exploits undefined behaviors in programs. We have implemented our analysis in LLVM and tested it with the benchmark of SIR programs. It reduces the time taken for solving path feasibility queries by 48%. The study can serve as guidance to practitioners using path feasibility queries to create scalable software engineering methods based on symbolic execution.

Large language models are increasingly deployed as agents that solve tasks by interacting with external tool environments. Although recent tool-use benchmarks increasingly cover complex task settings, they still largely assume clean, stable, and trustworthy tool environments, leaving tool-environment unreliability insufficiently examined. We introduce ToolBench-X, a benchmark for evaluating agents under recoverable reliability hazards. ToolBench-X contains executable multi-step tasks across diverse domains and sequential, parallel, and mixed workflows, each paired with deterministic tools and a canonical final answer for automatic evaluation. Starting from clean tool environments, ToolBench-X injects five structured hazard types: Specification Drift, Invocation Error, Execution Failure, Output Drift, and Cross-source Conflict. Crucially, each injected instance remains solvable through at least one valid recovery path, such as retrying, fallback, verification, or cross-checking. Experiments reveal a substantial reliability gap: agents that perform well with reliable tools often fail under recoverable hazards. Further analysis shows that failures are driven less by tool-use volume or inference budget than by limited hazard diagnosis and ineffective recovery. Targeted recovery hints recover many failed tasks, while test-time scaling yields more limited gains. These results suggest that tool-use evaluation should move beyond function-call accuracy toward task completion under unreliable tool environments. The code and data is available at https://github.com/Foreverskyou/ToolBench-X.

Agent harnesses have substantially improved performance on long-horizon tasks by coordinating agent interactions with the environment. However, reinforcement learning through complex harnesses remains largely unexplored, as scaling such training to long-horizon agent tasks introduces fundamental challenges. In this work, we present a unified black-box RL framework for stable and scalable optimization of general agents through complex harnesses. Concretely, we first build a sandbox-based execution infrastructure that isolates task environments and harnesses within temporary sandboxes for large-scale concurrent rollouts. We then decouple policy optimization from opaque harness execution and place a serving proxy at the model boundary to capture model calls. To reconstruct multi-turn trajectories and improve training efficiency, we organize the captured calls into prefix trees and further adapt both critic-based PPO and critic-free GRPO to optimize over the recovered tree structure. Meanwhile, we maintain training-inference consistency throughout the optimization process. Finally, we introduce mix-harness training, allowing a single model to be jointly optimized by heterogeneous harnesses. With Qwen3-30A3B, black-box RL improves Pass@1 on ClawGym-Bench by 9.98 and 14.81 points through OpenClaw and Claude Code, respectively, while remaining stable over 200-400 optimization steps. Moreover, the framework yields consistent gains on more challenging tasks such as JobBench and OfficeQA. Overall, our framework enables effective, stable, and scalable optimization of general agents through black-box harnesses, supporting unified training across heterogeneous execution systems.

Vibe coding produces correct, executable code at speed, but leaves no record of the structural commitments, dependencies, or evidence behind it. Reviewers cannot determine what invariants were assumed, what changed, or why a regression occurred. This is not a generation failure but a control failure: the dominant artifact of AI-assisted development (code plus chat history) performs dimension collapse, flattening complex system topology into low-dimensional text and making systems opaque and fragile under change. We propose Agentic Consensus: a paradigm in which the consensus layer C, an operable world model represented as a typed property graph, replaces code as the primary artifact of engineering. Executable artifacts are derived from C and kept in correspondence via synchronization operators Phi (realize) and Psi (rehydrate). Evidence links directly to structural claims in C, making every commitment auditable and under-specification explicit as measurable consensus entropy rather than a silent guess. Evaluation must move beyond code correctness toward alignment fidelity, consensus entropy, and intervention distance. We propose benchmark task families designed to measure whether consensus-based workflows reduce human intervention compared to chat-driven baselines.

LLM agents are expected to complete end-to-end units of work across software tools, business services, and local workspaces. Yet many agent benchmarks freeze a curated task set at release time and grade mainly the final response, making it difficult to evaluate agents against evolving workflow demand or verify whether a task was executed. We introduce Claw-Eval-Live, a live benchmark for workflow agents that separates a refreshable signal layer, updated across releases from public workflow-demand signals, from a reproducible, time-stamped release snapshot. Each release is constructed from public workflow-demand signals, with ClawHub Top-500 skills used in the current release, and materialized as controlled tasks with fixed fixtures, services, workspaces, and graders. For grading, Claw-Eval-Live records execution traces, audit logs, service state, and post-run workspace artifacts, using deterministic checks when evidence is sufficient and structured LLM judging only for semantic dimensions. The release contains 105 tasks spanning controlled business services and local workspace repair, and evaluates 13 frontier models under a shared public pass rule. Experiments reveal that reliable workflow automation remains far from solved: the leading model passes only 66.7% of tasks and no model reaches 70%. Failures are structured by task family and execution surface, with HR, management, and multi-system business workflows as persistent bottlenecks and local workspace repair comparatively easier but unsaturated. Leaderboard rank alone is insufficient because models with similar pass rates can diverge in overall completion, and task-level discrimination concentrates in a middle band of tasks. Claw-Eval-Live suggests that workflow-agent evaluation should be grounded twice, in fresh external demand and in verifiable agent action.

A promising research direction in enabling LLMs to generate consistently correct code involves addressing their inability to properly estimate program execution, particularly for code they generate. In this work, we demonstrate that Code LLMs can be trained to simulate program execution in a step-by-step manner and that this capability can be leveraged to improve competitive programming performance. Our approach combines supervised fine-tuning on natural language execution traces, textual explanations grounded in true execution, with reinforcement learning using verifiable rewards. We introduce two complementary objectives: output prediction given code and inputs, and solving competitive programming tasks with either ground-truth or self-predicted execution feedback. These objectives enable models to perform self-verification over multiple candidate solutions, and iterative self-fixing by simulating test execution. Across multiple competitive programming benchmarks, our method yields consistent improvements over standard reasoning approaches. We further present ablations and analysis to elucidate the role of execution simulation and its limitations.

The Model Context Protocol (MCP) has unified the interface between Large Language Models (LLMs) and external tools, yet a fundamental gap remains in how agents conceptualize the environments within which they operate. Current paradigms are bifurcated: Task-level planning often ignores execution-time dynamics, while reactive execution lacks long-horizon foresight. We present MCP-Cosmos, a framework that infuses generative World Models (WM) into the MCP ecosystem to enable predictive task automation. By unifying three disparate technologies, namely MCP, World Model, and Agent, we demonstrate that a "Bring Your Own World Model" (BYOWM) strategy allows agents to simulate state transitions and refine plans in a latent space before execution. We conducted experiments using two strategies, namely ReAct and SPIRAL with 2 planning models and 3 representative world models over 20+ MCP-Bench tasks. We observed improvements in Agent's environment interaction KPI such as tool success rate and tool parameter accuracy. The framework also offers new metrics such as Execution Quality to generate new insights about the effectiveness of world models compared to baseline.

We present RepoST, a scalable method to construct environments that provide execution feedback for repository-level code generation for both training and evaluation. Unlike existing works that aim to build entire repositories for execution, which is challenging for both human and LLMs, we provide execution feedback with sandbox testing, which isolates a given target function and its dependencies to a separate script for testing. Sandbox testing reduces the complexity of external dependencies and enables constructing environments at a large scale. We use our method to construct RepoST-Train, a large-scale train set with 7,415 functions from 832 repositories. Training with the execution feedback provided by RepoST-Train leads to a performance gain of 5.5% Pass@1 on HumanEval and 3.5% Pass@1 on RepoEval. We also build an evaluation dataset, RepoST-Eval, and benchmark 12 code generation models.

We present Eureka, a task-conditioned Meta-Agent architecture that compiles long-horizon tasks into dynamic obligation graphs with explicit acceptance semantics. During execution, Eureka forms Macro-Agents with specialized state, memory, operators, tools, verifiers, and local topology via receding-horizon planning, architecture promotion, and minimal-sufficient compilation. When bottlenecks recur, cost-benefit-gated evolution updates the local architecture under constraints. Theoretically, we establish results on regret, planning invalidation, amortization, subtree interfaces, serializability, and verification. Experimentally, Eureka completes 170/170 recursive tasks and generates 3,948 certificates with no false acceptances. Active context compresses median input from 9,490 to 4,005 tokens; incremental processing avoids 65.38% recomputation across 12,000 tasks; 16,000 concurrent executions serialize consistently. The same Meta-Agent instantiates a Theory-Discovery Agent and a Math/Conjecture Agent. The former yields structural results in quantum-process and spacetime theory. The latter identifies bottlenecks in Riemann Hypothesis research and advances a positivity certificate for Suzuki's localized Weil quadratic form to 0 < a <= 69/200 = 0.345, reaching ~99.55% of (log 2)/2. These results suggest that scientific-agent capability depends not only on the base model but on whether an architecture can be formed to match the task's cognitive structure.

Agentic systems increasingly solve complex user requests by executing orchestrated workflows, where subtasks are assigned to specialized models or tools and coordinated according to their dependencies. While recent work improves agent efficiency by optimizing the performance--cost--latency frontier, real deployments often impose concrete requirements: a workflow must be completed within a specified budget and before a specified deadline. This shifts the goal from average efficiency optimization to maximizing the probability that the entire workflow completes successfully under explicit budget and deadline constraints. We study constraint-driven online resource allocation for agentic workflows. Given a dependency-structured workflow and estimates of success rates and generation lengths for each subtask--model pair, the executor allocates models and parallel samples across simultaneously executable subtasks while managing the remaining budget and time. We formulate this setting as a finite-horizon stochastic online allocation problem and propose Monte Carlo Portfolio Planning (MCPP), a lightweight closed-loop planner that directly estimates constrained completion probability through simulated workflow executions and replans after observed outcomes. Experiments on CodeFlow and ProofFlow demonstrate that MCPP consistently improves constrained completion probability over strong baselines across a wide range of budget--deadline constraints.

As large language models (LLMs) become high-privilege agents in risk-sensitive settings, they introduce systemic threats beyond hallucination, where minor compliance errors can cause critical data leaks. However, existing benchmarks focus on rule-based QA, lacking agentic execution modeling, overlooking compliance drift in adversarial interactions, and relying on binary safety metrics that fail to capture behavioral degradation. To bridge these gaps, we present CNFinBench, a comprehensive benchmark spanning 29 subtasks grounded in the triad of expertise, autonomy, and integrity. It assesses domain-specific capabilities through certified regulatory corpora and professional financial tasks, reconstructs end-to-end agent workflows from requirement parsing to tool verification, and simulates multi-turn adversarial attacks that induce behavioral compliance drift. To quantify safety degradation, we introduce the Harmful Instruction Compliance Score (HICS), a multi-dimensional safety metric that integrates risk-type-specific deductions, multi-turn consistency tracking, and severity-adjusted penalty scaling based on fine-grained violation triggers. Evaluations over 22 open-/closed-source models reveal: LLMs perform well in applied tasks yet lack robust rule understanding, suffer a 15.4-point drop single modules to full execution chains, and collapse rapidly in multi-turn attacks, with average violations surging by 172.3% in Round 2. CNFinBench is available at https://cnfinbench.opencompass.org.cn and https://github.com/VertiAIBench/CNFinBench.

LLM-based agents have shown strong potential for solving complex multi-step tasks, yet existing performance improvements often rely on either scaling to larger backbone models or task-specific fine-tuning. The former incurs substantial computational costs, while the latter typically generalizes poorly across different tasks. Although prompt-based control is training-free and broadly applicable, existing methods still leave input-output dependencies between subtasks implicit in textual trajectories, making verified intermediate results difficult to reuse. To address these limitations, we propose Atomic Task Graph (ATG), a unified control framework for planning and execution. Specifically, ATG maintains an explicit graph to expose dependencies and support reuse. During planning, it recursively decomposes a high-level task into subtasks, forming a sequence of directed acyclic graphs (DAGs) whose evolution can be traced. During execution, the dependencies exposed by ATG allow independent branches to be executed in parallel, thereby improving execution efficiency. When failures are detected, ATG leverages the graph evolution history to localize the error source and repair only the affected region, preserving validated regions unchanged. Experiments show that ATG consistently outperforms strong baselines in success rate and execution efficiency across three interactive benchmarks using only 7B-8B backbones.

Recently, studies exemplified by Hyper-Connections (HC) have extended the ubiquitous residual connection paradigm established over the past decade by expanding the residual stream width and diversifying connectivity patterns. While yielding substantial performance gains, this diversification fundamentally compromises the identity mapping property intrinsic to the residual connection, which causes severe training instability and restricted scalability, and additionally incurs notable memory access overhead. To address these challenges, we propose Manifold-Constrained Hyper-Connections (mHC), a general framework that projects the residual connection space of HC onto a specific manifold to restore the identity mapping property, while incorporating rigorous infrastructure optimization to ensure efficiency. Empirical experiments demonstrate that mHC is effective for training at scale, offering tangible performance improvements and superior scalability. We anticipate that mHC, as a flexible and practical extension of HC, will contribute to a deeper understanding of topological architecture design and suggest promising directions for the evolution of foundational models.

Tool use enables large language models to solve complex tasks through sequences of API calls, yet existing reinforcement learning approaches fail to scale to multi-step composition settings. Outcome-based rewards provide only sparse feedback, while trajectory-supervised rewards depend on annotated reference solutions, penalizing valid alternatives and limiting scalability. We propose TIER: Trajectory-Invariant Execution Rewards, a reward framework that derives supervision directly from function schemas and runtime execution, rather than from reference trajectories. The reward decomposes into format validity, schema adherence, execution success, and answer correctness, providing dense, interpretable sequence-level feedback derived from fine-grained verification of individual steps of tool use. This design allows any valid execution path to receive credit, naturally supporting multiple solution strategies and adapting to evolving tool interfaces. On DepthBench, a compositional benchmark stratified by depth (1 to 6 steps), TIER achieves >90% accuracy across steps, where trajectory-supervised rewards collapse beyond step-4. We further demonstrate consistent gains on benchmarks like BFCL v3 and NestFUL. Ablation studies confirm that all reward components are necessary, highlighting the importance of multi-level supervision for compositional reasoning.

Tool use extends large language models beyond parametric knowledge, but reliable execution requires balancing appropriate reasoning depth with strict structural validity. We approach this problem from a case-based perspective to present CAST, a case-driven framework that treats historical execution trajectories as structured cases. Instead of reusing raw exemplar outputs, CAST extracts case-derived signals to identify complexity profiles for estimating optimal reasoning strategies, alongside failure profiles to map likely structural breakdowns. The framework translates this knowledge into a fine-grained reward design and adaptive reasoning, enabling the model to autonomously internalize case-based strategies during reinforcement learning. Experiments on BFCLv2 and ToolBench demonstrate that CAST improves both schema-faithful execution and task-level tool-use success while reducing unnecessary deliberation. The approach achieves up to 5.85 percentage points gain in overall execution accuracy and reduces average reasoning length by 26%, significantly mitigating high-impact structural errors. Ultimately, this demonstrates how historical execution cases can provide reusable adaptation knowledge for calibrated tool use.

Tool-augmented LLMs are increasingly deployed as agents that interleave natural-language reasoning with executable Python actions, as in CodeAct-style frameworks. In deployment, these agents rely on runtime state that persists across steps. By contrast, common training pipelines treat agent traces as token sequences, with execution semantics left implicit. This raises a data-centric question: Is state persistence merely an inference-time scaffold, or can models learn to exploit it when training data exposes the corresponding execution semantics? We isolate state persistence as a training-time variable. We introduce Opaque Knapsack, a procedurally generated family of partially observable optimization tasks designed to prevent one-shot solutions. Item attributes and constraints are hidden behind budgeted tool calls, forcing multi-turn control flow and iterative state revision. Holding task instances, prompts, tools, model, and supervision fixed, we generate paired trajectories differing only in whether interpreter state persists across steps or resets after each action. We then fine-tune identical base models (Qwen3-8B) on each trace variant and evaluate all four train-runtime combinations. Our 2x2 cross-evaluation shows that execution semantics primarily affect how agents reach solutions, not whether they do: solution quality is statistically indistinguishable across conditions, but token cost and stability differ substantially. A persistent-trained model in a stateless runtime triggers missing-variable errors in roughly 80% of episodes; a stateless-trained model in a persistent runtime redundantly re-derives retained state, using roughly 3.5x more tokens. Interpreter persistence should be treated as a first-class semantic of agent traces. Aligning fine-tuning data with deployment runtimes improves efficiency and reduces brittle train-runtime mismatches.

Executable software engineering data is valuable for training SWE agents, but scaling it remains difficult for two reasons: only a small fraction of real repository changes yield verifiable, high-signal task instances, and naively building repository-specific environments quickly becomes the dominant systems cost. We present SWE-Next, an execution-grounded framework for scalable SWE task and trajectory collection. On the data side, SWE-Next mines real merged pull requests, executes candidate base/merged commit pairs, and retains only those that produce strict test improvements without regressions, yielding self-verifying instances. It also applies strict submission gating so that collected trajectories remain evidence-driven rather than speculative. On the systems side, SWE-Next introduces reusable repo-quarter profiles, which reuse the same environment across nearby commits in time while keeping each task run separate and reproducible. Using only 30 hours and 639GB of environment storage, SWE-Next processes 3,971 seed repositories and 102,582 candidate commit pairs mined from real merged PRs to construct a dataset of 2,308 self-verifying instances. Experiments show that SWE-Next improves downstream pass@1 with fewer or comparable training trajectories, indicating that its gains come not from a stronger trajectory generator, but from higher-signal execution-grounded supervision and more efficient data collection.

The field of Artificial Intelligence is undergoing a transition from Generative AI -- probabilistic generation of text and images -- to Agentic AI, in which autonomous systems execute actions within external environments on behalf of users. This transition exposes a fundamental architectural mismatch: Large Language Models (LLMs) produce stochastic, unstructured outputs, whereas the backend infrastructure they must control -- databases, APIs, cloud services -- requires deterministic, schema-conformant inputs. The present paper describes the Auton Agentic AI Framework, a principled architecture for standardizing the creation, execution, and governance of autonomous agent systems. The framework is organized around a strict separation between the Cognitive Blueprint, a declarative, language-agnostic specification of agent identity and capabilities, and the Runtime Engine, the platform-specific execution substrate that instantiates and runs the agent. This separation enables cross-language portability, formal auditability, and modular tool integration via the Model Context Protocol (MCP). The paper formalizes the agent execution model as an augmented Partially Observable Markov Decision Process (POMDP) with a latent reasoning space, introduces a hierarchical memory consolidation architecture inspired by biological episodic memory systems, defines a constraint manifold formalism for safety enforcement via policy projection rather than post-hoc filtering, presents a three-level self-evolution framework spanning in-context adaptation through reinforcement learning, and describes runtime optimizations -- including parallel graph execution, speculative inference, and dynamic context pruning -- that reduce end-to-end latency for multi-step agent workflows.

Large language models for code generation often need to use APIs that are absent from their pretraining data. This requires more than recalling a function name: models must coordinate signatures, module paths, input-output contracts, semantics, and executable usage patterns. Existing novel-API benchmarks are typically static, rely on coarse pass/fail metrics, or use synthetic APIs that may not reflect real library evolution. We introduce NovelAPIBench, a fully automated dynamic benchmark that, for any base model and target library, discovers novel APIs, extracts decomposed knowledge bundles, generates executable coding tasks, and assigns failed samples to six diagnostic categories. Across about 1.9K tasks, four base models, and five domains, we compare knowledge injected through retrieval with knowledge internalized through parametric adaptation. We find that knowledge components are not interchangeable: usage examples are the strongest standalone signal, while the best two-component setting pairs signatures with either mechanisms or examples depending on the domain and backbone. Adding more context, especially source code, can hurt by increasing import-path errors. Parametric adaptation also does not replace retrieval once external knowledge is removed; rather, fine-tuning mainly teaches models how to use provided bundles, and this ability transfers to held-out libraries. These results suggest that retrieval and tuning play complementary roles: retrieval supplies volatile API content, while tuning improves procedural integration.

The integration of Large Language Models (LLMs) into Geographic Information Systems (GIS) marks a paradigm shift toward autonomous spatial analysis. However, evaluating these LLM-based agents remains challenging due to the complex, multi-step nature of geospatial workflows. Existing benchmarks primarily rely on static text or code matching, neglecting dynamic runtime feedback and the multimodal nature of spatial outputs. To address this gap, we introduce GeoAgentBench (GABench), a dynamic and interactive evaluation benchmark tailored for tool-augmented GIS agents. GABench provides a realistic execution sandbox integrating 117 atomic GIS tools, encompassing 53 typical spatial analysis tasks across 6 core GIS domains. Recognizing that precise parameter configuration is the primary determinant of execution success in dynamic GIS environments, we designed the Parameter Execution Accuracy (PEA) metric, which utilizes a "Last-Attempt Alignment" strategy to quantify the fidelity of implicit parameter inference. Complementing this, a Vision-Language Model (VLM) based verification is proposed to assess data-spatial accuracy and cartographic style adherence. Furthermore, to address the frequent task failures caused by parameter misalignments and runtime anomalies, we developed a novel agent architecture, Plan-and-React, that mimics expert cognitive workflows by decoupling global orchestration from step-wise reactive execution. Extensive experiments with seven representative LLMs demonstrate that the Plan-and-React paradigm significantly outperforms traditional frameworks, achieving the optimal balance between logical rigor and execution robustness, particularly in multi-step reasoning and error recovery. Our findings highlight current capability boundaries and establish a robust standard for assessing and advancing the next generation of autonomous GeoAI.

Prompt optimization can improve multi-agent LLM systems, but the prompts being optimized often serve two entangled roles: generating task-relevant content and specifying execution-critical protocols, such as message routing, output formatting, and termination signals, on which the underlying code relies. As a result, a prompt edit intended to improve content generation can inadvertently corrupt the protocol and cause the entire agent pipeline to fail. Our key observation is that these two roles have different representations: execution protocols are typically structured, while task-relevant content is usually expressed in unstructured language. Based on this, we propose control-data flow separation, where execution-critical control is represented as typed, validated program objects, while task-relevant language remains the optimizable data flow for agent communication. This design allows optimizers to improve multi-agent behavior without exposing the routing or formatting interface to prompt drift. Across synthetic reasoning, collaborative review generation, and insurance rating workflows, our framework empirically achieves 100% eventual protocol validity while consistently improving task performance.

LLM serving systems typically treat user prompts as monolithic inputs, optimizing inference through decoding tricks or inter-query batching. However, many real-world prompts contain latent semantic parallelism--decomposable structures where subtasks can be executed independently to reduce latency while preserving meaning. We introduce PARALLELPROMPT, the first benchmark for measuring intra-query parallelism in natural user prompts. Our dataset comprises over 37,000 real-world prompts from public LLM chat logs, each annotated with a structured schema capturing task templates, shared context, and iteration inputs. These schemas are extracted using LLM-assisted prompting with rule-based multilingual validation. To evaluate the benefits of decomposition, we provide an execution suite that benchmarks serial vs. parallel strategies, measuring latency, structural adherence, and semantic fidelity. Our results show that intra-query parallelism can be successfully parsed in over 75% of curated datasets, unlocking up to 5x speedups on tasks like translation, comprehension, and comparative analysis, with minimal quality degradation. By releasing this benchmark, curation pipeline, and evaluation suite, we provide the first standardized testbed for studying structure-aware execution in LLM serving pipelines.

Multi-agent systems (MAS) enable complex reasoning by coordinating multiple agents, but often incur high inference latency due to multi-step execution and repeated model invocations, severely limiting their scalability and usability in time-sensitive scenarios. Most existing approaches primarily optimize task performance and inference cost, and explicitly or implicitly assume sequential execution, making them less optimal for controlling latency under parallel execution. In this work, we investigate learning-based orchestration of multi-agent systems with explicit latency supervision under parallel execution. We propose Latency-Aware Multi-agent System (LAMaS), a latency-aware multi-agent orchestration framework that enables parallel execution and explicitly optimizes the critical execution path, allowing the controller to construct execution topology graphs with lower latency under parallel execution. Our experiments show that our approach reduces critical path length by 38-46% compared to the state-of-the-art baseline for multi-agent architecture search across multiple benchmarks, while maintaining or even improving task performance. These results highlight the importance of explicitly optimizing latency under parallel execution when designing efficient multi-agent systems. The code is available at https://github.com/xishi404/LAMaS

Deployed LLM agents rely on agentic context, the model-external textual control content assembled by an operational harness. In this work, the mutable component of that context is a persistent system-level instruction that is updated from operational experience while the model, tools, and harness remain fixed. Over long evolution horizons, flat-text maintenance makes verification increasingly difficult as accumulated instructions grow and interact. We propose Graph-Regularized Agentic Context Evolution (GRACE), which maintains the persistent instruction component as a typed semantic graph and validates proposed updates within the local typed neighborhoods of modified nodes. Accepted graph updates are reconstructed as incremental edits to the textual instruction checkpoint used at deployment. We evaluate GRACE within a fixed telecom agent harness derived from τ^2-bench under a controlled distribution-shift protocol. Across five independent replications, GRACE improves strict reliability, measured by pass^3, from the Gemini 2.5 Flash zero-shot value of 0.091 to 0.673pm0.136 at the final checkpoint. This exceeds a Gemini 3.1 Pro zero-shot reference of 0.242 on the same held-out set, while the flat-text HCE baseline finishes at 0.191pm0.051. These results identify two requirements for reliable long-horizon context evolution, a structural substrate that makes verification local and a consolidation mechanism that keeps accumulated instruction content usable.

LLM agents increasingly rely on iterative execution to solve tasks through planning, tool use, state updates, and agent collaboration. While this design enables flexible automation, it also creates a new class of failures: an agent may repeatedly execute model calls, tools, workflow transitions, or agent handoffs when the feedback path is not effectively bounded. We call this problem Infinite Agentic Loops (IALs). IALs are not ordinary programming loops; they arise from the interaction between agent logic, framework semantics, runtime observations, and termination mechanisms. Such failures can amplify a single request into long running model and tool execution, causing cost exhaustion, model denial of service, context growth, and repeated external side effects. We propose IAL-Scan, a static analysis tool for detecting IAL failures in real-world LLM agent projects. IAL-Scan abstracts heterogeneous agent code into a framework independent Agent IR, builds an Agentic Loop Dependence Graph (ALDG) to recover explicit and framework induced feedback paths, and checks whether these paths can repeatedly reach costly or state growing operations without an effective bound. We evaluate IAL-Scan on 6,549 LLM agent repositories. It reports 74 potential findings, among which manual review confirms 68 IAL failures across 47 projects, achieving 91.9% precision.

Every major LLM agent framework gives the LLM the role of orchestrator; the model decides what to do next, when to call tools, and when to stop. We argue that token explosion, control-flow hallucination, and unreliable completion are not implementation bugs but architectural consequences of assigning the deterministic work of looping, branching, and sequencing to a probabilistic system. A better prompt or a stronger model cannot guarantee the reliability of the LLM agent. We therefore propose Agentic Programming, in which the program governs all control flow, and the LLM is itself part of it, an adaptive component we call LLM-as-Code and invoke only where a task calls for reasoning or generation. Within each call the model keeps full flexibility, but it cannot alter the program's execution path. With control in the program, the LLM's context is built from the execution history's call tree and forms a directed acyclic graph (DAG). Each call's context length is then determined by its call depth rather than by accumulation over steps. A case study of computer-use agents shows that the design is practical, not just a theoretical stance, substantially improving the stability of long visual operation sequences.

As autonomous code agents move toward end-to-end software development, evaluating their practical autonomy becomes critical. Current benchmarks hide friction by testing agents in pre-configured environments, and their static evaluation pipelines frequently fail when parsing fully autonomous trajectories. We address these limitations with SWE-Cycle, a benchmark of 489 rigorously filtered instances. SWE-Cycle evaluates agents across three isolated tasks, including environment reconstruction, code implementation, and verification test generation, as well as an end-to-end FullCycle task that integrates all three. The FullCycle task requires agents to work autonomously in a bare repository without human scaffolding. To reliably assess these complex execution paths, we developed SWE-Judge. By combining static code review with dynamic testing, this execution-capable evaluation agent accurately verifies functional correctness and eliminates the systematic measurement errors of traditional static parsers. We evaluate code agents powered by six state-of-the-art LLMs across these four tasks. The results reveal a sharp drop in solve rates when transitioning from isolated tasks to FullCycle execution, exposing critical bottlenecks in handling cross-phase dependencies and maintaining code quality. Together, SWE-Cycle and SWE-Judge provide a comprehensive framework for accurately measuring the end-to-end capabilities of autonomous software agents.

Binary decompilation is fundamental to security tasks such as vulnerability discovery, malware inspection, and executable-only program understanding. Recent LLM-based decompilation methods have shown promising results, but most still follow a single-turn generation paradigm: given assembly code or decompiler-produced pseudo-code, the model generates one output and stops. Consequently, the generated code may appear readable or even compile successfully, yet still deviate from the behavior of the original binary and mislead downstream analysis. This paper presents AutoDecompiler, a decompilation-specialized LLM trained with reinforcement learning for feedback-driven multi-turn binary decompilation. Instead of treating decompilation as one-shot code generation, AutoDecompiler formulates it as an iterative refinement process, where the model revises generated code based on compilation, execution, and input/output testing feedback. To enable this process, we design decompilation-specific rewards that capture code validity, recompilability, execution consistency, and semantic fidelity. We further construct stage-aware diagnostic feedback from compiler errors, execution failures, and failed test cases, and introduce progress-aware trajectory rewarding and turn-aware advantage reweighting to encourage beneficial revisions while suppressing regressions. We train the AutoDecompiler family and evaluate it across different input settings, model scales, and benchmarks. Experimental results show that AutoDecompiler consistently outperforms its single-turn counterparts under the same model size and input setting, achieving clear improvements in behavioral re-executability. These results demonstrate that learning to exploit program feedback with reinforcement learning is an effective direction for improving the functional correctness of LLM-based binary decompilation.

Current LLM-based coding agents follow a serial execution paradigm: the model first generates the complete code, then invokes an interpreter to execute it. This sequential workflow leaves the executor idle during generation and the generator idle during execution, resulting in unnecessary end-to-end latency. We observe that, unlike human developers, LLMs produce code tokens sequentially without revision, making it possible to execute code as it is being generated. We formalize this parallel execution paradigm, modeling it as a three-stage pipeline of generation, detection, and execution, and derive closed-form latency bounds that characterize its speedup potential and operating regimes. We then present Eager, a concrete implementation featuring AST-based chunking, dynamic batching with gated execution, and early error interruption. We evaluate Eager across four benchmarks, seven LLMs, and three execution environments. Results show that Eager reduces the non-overlapped execution latency by up to 99.9% and the end-to-end latency by up to 55% across seven LLMs and four benchmarks.

LLM agents operating in open environments face escalating risks from indirect prompt injection, particularly within the tool stream where manipulated metadata and runtime feedback hijack execution flow. Existing defenses encounter a critical dilemma as advanced models prioritize injected rules due to strict alignment while static protection mechanisms sever the feedback loop required for adaptive reasoning. To reconcile this conflict, we propose VIGIL, a framework that shifts the paradigm from restrictive isolation to a verify-before-commit protocol. By facilitating speculative hypothesis generation and enforcing safety through intent-grounded verification, VIGIL preserves reasoning flexibility while ensuring robust control. We further introduce SIREN, a benchmark comprising 959 tool stream injection cases designed to simulate pervasive threats characterized by dynamic dependencies. Extensive experiments demonstrate that VIGIL outperforms state-of-the-art dynamic defenses by reducing the attack success rate by over 22\% while more than doubling the utility under attack compared to static baselines, thereby achieving an optimal balance between security and utility.

Low Earth orbit (LEO) satellites increasingly carry compute hardware capable of on-board processing, yet each satellite generates roughly two orders of magnitude more data than it can downlink per orbit. This mismatch forces operators to decide, for every workload, which computation runs on-board and which runs on the ground, how intermediate data crosses the space-ground boundary through narrow contact windows, and how to maintain delivery guarantees over noisy channels. We present Constraint-Aware Execution (CAE), a planning system that takes a satellite identifier, a workload expressed as a directed acyclic graph of processing steps, and a set of orbital and resource constraints, and produces a deterministic, physically grounded execution plan. CAE operates in four phases: (1) orbital environment construction via SGP4 propagation with eclipse detection and ground station pass prediction, (2) compute placement using a cost model that compares on-board resource consumption against transfer overhead, (3) transfer insertion with adaptive forward error correction and security overhead modeling, and (4) greedy first-fit scheduling into orbital windows under power, thermal, compute, and communication constraints. We evaluate CAE against five representative workload patterns across satellites in distinct orbital regimes and demonstrate that the system produces feasible plans in under two seconds, correctly exploits onboard data reduction to minimize transfer volume, and adapts FEC and multi-pass allocation to varying channel conditions. CAE is deployed as a production API computing plans for any cataloged satellite using live two-line element data.

Clawdbot is a self-hosted, tool-using personal AI agent with a broad action space spanning local execution and web-mediated workflows, which raises heightened safety and security concerns under ambiguity and adversarial steering. We present a trajectory-centric evaluation of Clawdbot across six risk dimensions. Our test suite samples and lightly adapts scenarios from prior agent-safety benchmarks (including ATBench and LPS-Bench) and supplements them with hand-designed cases tailored to Clawdbot's tool surface. We log complete interaction trajectories (messages, actions, tool-call arguments/outputs) and assess safety using both an automated trajectory judge (AgentDoG-Qwen3-4B) and human review. Across 34 canonical cases, we find a non-uniform safety profile: performance is generally consistent on reliability-focused tasks, while most failures arise under underspecified intent, open-ended goals, or benign-seeming jailbreak prompts, where minor misinterpretations can escalate into higher-impact tool actions. We supplemented the overall results with representative case studies and summarized the commonalities of these cases, analyzing the security vulnerabilities and typical failure modes that Clawdbot is prone to trigger in practice.

The advancement of machine learning for compiler optimization, particularly within the polyhedral model, is constrained by the scarcity of large-scale, public performance datasets. This data bottleneck forces researchers to undertake costly data generation campaigns, slowing down innovation and hindering reproducible research learned code optimization. To address this gap, we introduce LOOPerSet, a new public dataset containing 28 million labeled data points derived from 220,000 unique, synthetically generated polyhedral programs. Each data point maps a program and a complex sequence of semantics-preserving transformations (such as fusion, skewing, tiling, and parallelism)to a ground truth performance measurement (execution time). The scale and diversity of LOOPerSet make it a valuable resource for training and evaluating learned cost models, benchmarking new model architectures, and exploring the frontiers of automated polyhedral scheduling. The dataset is released under a permissive license to foster reproducible research and lower the barrier to entry for data-driven compiler optimization.

Autonomous machine learning agents have revolutionized scientific discovery, yet they remain constrained by a Generate-Execute-Feedback paradigm. Previous approaches suffer from a severe Execution Bottleneck, as hypothesis evaluation relies strictly on expensive physical execution. To bypass these physical constraints, we internalize execution priors to substitute costly runtime checks with instantaneous predictive reasoning, drawing inspiration from World Models. In this work, we formalize the task of Data-centric Solution Preference and construct a comprehensive corpus of 18,438 pairwise comparisons. We demonstrate that LLMs exhibit significant predictive capabilities when primed with a Verified Data Analysis Report, achieving 61.5% accuracy and robust confidence calibration. Finally, we instantiate this framework in FOREAGENT, an agent that employs a Predict-then-Verify loop, achieving a 6x acceleration in convergence while surpassing execution-based baselines by +6%. Our code and dataset will be publicly available soon at https://github.com/zjunlp/predict-before-execute.

OpenClaw-style agent stacks turn language into privileged execution: LLM intents flow through tool interception, policy gates, and a local executor. In parallel, skill marketplaces such as skills.sh make capability acquisition as easy as installing skills and CLIs, creating a growing capability supply chain. Together, these trends shift the dominant safety failure mode from "wrong answers" to execution-induced loss, where untrusted prompts, compromised skills, or narrative manipulation can trigger real trades and irreversible side effects. We propose Survivability-Aware Execution (SAE), an execution-layer survivability standard for OpenClaw-style systems and skill-enabled agents. SAE sits as middleware between a strategy engine (LLM or non-LLM) and the exchange executor. It defines an explicit execution contract (ExecutionRequest, ExecutionContext, ExecutionDecision) and enforces non-bypassable last-mile invariants: projection-based exposure budgets, cooldown and order-rate limits, slippage bounds, staged execution, and tool/venue allowlists. To make delegated execution testable under supply-chain risk, we operationalize the Delegation Gap (DG) via a logged Intended Policy Spec that enables deterministic out-of-scope labeling and reproducible DG metrics. On an offline replay using official Binance USD-M BTCUSDT/ETHUSDT perpetual data (15m; 2025-09-01--2025-12-01, incl. funding), SAE improves survivability: MDD drops from 0.4643 to 0.0319 (Full; 93.1%), |CVaR_0.99| shrinks from 4.025e-3 to ~1.02e-4 (~97.5%), and DG loss proxy falls from 0.647 to 0.019 (~97.0%). AttackSuccess decreases from 1.00 to 0.728 with zero FalseBlock in this run. Block bootstrap, paired Wilcoxon, and two-proportion tests confirm the shifts. SAE reframes agentic trading safety for the OpenClaw+skills era: treat upstream intent and skills as untrusted, and enforce survivability where actions become side effects.

Optimizing the performance of large-scale software repositories demands expertise in code reasoning and software engineering (SWE) to reduce runtime while preserving program correctness. However, most benchmarks emphasize what to fix rather than how to fix code. We introduce SWE-fficiency, a benchmark for evaluating repository-level performance optimization on real workloads. Our suite contains 498 tasks across nine widely used data-science, machine-learning, and HPC repositories (e.g., numpy, pandas, scipy): given a complete codebase and a slow workload, an agent must investigate code semantics, localize bottlenecks and relevant tests, and produce a patch that matches or exceeds expert speedup while passing the same unit tests. To enable this how-to-fix evaluation, our automated pipeline scrapes GitHub pull requests for performance-improving edits, combining keyword filtering, static analysis, coverage tooling, and execution validation to both confirm expert speedup baselines and identify relevant repository unit tests. Empirical evaluation of state-of-the-art agents reveals significant underperformance. On average, agents achieve less than 0.15x the expert speedup: agents struggle in localizing optimization opportunities, reasoning about execution across functions, and maintaining correctness in proposed edits. We release the benchmark and accompanying data pipeline to facilitate research on automated performance engineering and long-horizon software reasoning.

Agentic systems built on large language models (LLMs) extend beyond text generation to autonomously retrieve information and invoke tools. This runtime execution model shifts the attack surface from build-time artifacts to inference-time dependencies, exposing agents to manipulation through untrusted data and probabilistic capability resolution. While prior work has focused on model-level vulnerabilities, security risks emerging from cyclic and interdependent runtime behavior remain fragmented. We systematize these risks within a unified runtime framework, categorizing threats into data supply chain attacks (transient context injection and persistent memory poisoning) and tool supply chain attacks (discovery, implementation, and invocation). We further identify the Viral Agent Loop, in which agents act as vectors for self-propagating generative worms without exploiting code-level flaws. Finally, we advocate a Zero-Trust Runtime Architecture that treats context as untrusted control flow and constrains tool execution through cryptographic provenance rather than semantic inference.

Recent systems for optimizing prompts, programs, and ML workflows typically rely on explicit outer-loop controllers such as evolutionary search, bandits, or textual-gradient methods. We ask a fundamentally different question: how much of this search policy can be internalized by a single tool-using agent? We present ReASearch, a unified framework for reasoning-driven optimization in which the agent autonomously decides what to evaluate, how to diagnose failures, which edits to make, and when to verify or restart. Rather than serving only as a proposal generator guided by hand-designed heuristics, the agent actively analyzes outcomes, allocates budget, and refines its strategy over long horizons through persistent memory. With a shared agent loop and domain-specific tools, ReASearch instantiates the exact same scaffold to optimize prompts, programs, and ML workflows. Across 14 diverse tasks, it is competitive with and mostly better than specialized optimization systems, achieving gains of 2% to 40% over strong domain-specific baselines, and in some cases discovering solutions that improve on prior human best-known results. Crucially, we observe that complex search behaviors, which are typically implemented by explicit controllers, emerge naturally from the agent's reasoning process.

LLM-based agents execute multi-step tasks, but their behavioral structure remains opaque: long unstructured traces resist the safety auditing and runtime monitoring that deployment requires. Existing approaches operate per-trace or success-only, so they miss the cross-run topology that links next-step and failure prediction. To recover that shared structure, we collapse an entire trace corpus into a single, compact finite-state machine (FSM) that serves as a structural substrate for the otherwise unpredictable behavior of LLM agents. Across twelve public datasets, the FSMs are compact (7-43 states), replay held-out data at >=0.997 fitness with near-identical topology across splits, and build in milliseconds. This substrate addresses both prediction goals. For next-step prediction, FSM-state context outperforms Agent Workflow Memory on every ground-truth-matched dataset. For failure prediction, per-state behavioral features reach held-out AUROC up to 0.94, and an online monitor ranks failing runs above passing ones from a partial trace, triggering early stopping well before completion. Behavioral topology thus appears shaped more by the deployment harness than by the LLM, providing a model-agnostic structural primitive for safety auditing and runtime monitoring.

We introduce ISO-Bench, a benchmark for coding agents to test their capabilities on real-world inference optimization tasks. These tasks were taken from vLLM and SGLang, two of the most popular LLM serving frameworks. Each task provides an agent with a codebase and bottleneck description, whereby the agent must produce an optimization patch evaluated against expert human solutions. We curated 54 tasks from merged pull requests with measurable performance improvements. While existing benchmarks heavily use runtime-based metrics, such approaches can be gamed to pass tests without capturing the actual intent of the code changes. Therefore, we combine both hard (execution-based) and soft (LLM-based) metrics to show that both are necessary for complete evaluation. While evaluating both closed and open-source coding agents, we find no single agent dominates across codebases. Surprisingly, agents often identify correct bottlenecks but fail to execute working solutions. We also show that agents with identical underlying models differ substantially, suggesting scaffolding is as important as the model.

Building a scalable and real-time recommendation system is vital for many businesses driven by time-sensitive customer feedback, such as short-videos ranking or online ads. Despite the ubiquitous adoption of production-scale deep learning frameworks like TensorFlow or PyTorch, these general-purpose frameworks fall short of business demands in recommendation scenarios for various reasons: on one hand, tweaking systems based on static parameters and dense computations for recommendation with dynamic and sparse features is detrimental to model quality; on the other hand, such frameworks are designed with batch-training stage and serving stage completely separated, preventing the model from interacting with customer feedback in real-time. These issues led us to reexamine traditional approaches and explore radically different design choices. In this paper, we present Monolith, a system tailored for online training. Our design has been driven by observations of our application workloads and production environment that reflects a marked departure from other recommendations systems. Our contributions are manifold: first, we crafted a collisionless embedding table with optimizations such as expirable embeddings and frequency filtering to reduce its memory footprint; second, we provide an production-ready online training architecture with high fault-tolerance; finally, we proved that system reliability could be traded-off for real-time learning. Monolith has successfully landed in the BytePlus Recommend product.

Coding agents powered by large language models have shown impressive capabilities in software engineering tasks, but evaluating their performance across diverse programming languages and real-world scenarios remains challenging. We introduce SWE-PolyBench, a new multi-language benchmark for repository-level, execution-based evaluation of coding agents. SWE-PolyBench contains 2110 instances from 21 repositories and includes tasks in Java (165), JavaScript (1017), TypeScript (729) and Python (199), covering bug fixes, feature additions, and code refactoring. We provide a task and repository-stratified subsample (SWE-PolyBench500) and release an evaluation harness allowing for fully automated evaluation. To enable a more comprehensive comparison of coding agents, this work also presents a novel set of metrics rooted in syntax tree analysis. We evaluate leading open source coding agents on SWE-PolyBench, revealing their strengths and limitations across languages, task types, and complexity classes. Our experiments show that current agents exhibit uneven performances across languages and struggle with complex problems while showing higher performance on simpler tasks. SWE-PolyBench aims to drive progress in developing more versatile and robust AI coding assistants for real-world software engineering. Our datasets and code are available at: https://github.com/amazon-science/SWE-PolyBench

AI agents are increasingly used to solve complex, multi-step tasks, but existing multi-agent frameworks remain brittle as workflows grow in scale and depth. Small errors at intermediate stages can propagate through agent interactions, while insufficient grounding and weak verification mechanisms further limit reliability. We present Meta-Agent, a two-phase framework that automatically constructs and executes specialized multi-agent systems from natural-language task descriptions. In the construction phase, a task planner decomposes a problem into a directed acyclic graph of agent specifications with explicit input/output contracts and verification criteria. A web search module grounds each specification with external evidence, and a code generation module produces system prompts and tool configurations. A construction-time verification stage then validates generated artifacts and triggers targeted regeneration when failures are detected. In the execution phase, a coordinator dispatches subtasks across the agent graph while execution-time verification gates intermediate outputs. We further introduce a three-level error attribution mechanism that distinguishes local, upstream, and structural failures, enabling targeted recovery strategies ranging from localized retries to partial re-execution and re-decomposition. We evaluate Meta-Agent across coding, contextual learning, and open-ended reasoning tasks. Experiments against strong multi-agent baselines and ablation studies demonstrate consistent improvements in task success rate, error recovery, and workflow stability. The results highlight the importance of tightly integrating planning, grounding, and verification for building reliable multi-agent systems.

Multi-agent orchestration frameworks such as LangChain, LangGraph, and CrewAI route tasks through graph-based pipelines but do not enforce the stage constraints that govern real business processes. We present SDOF, a framework that treats multi-agent execution as a constrained state machine. SDOF operates through two primary defensive layers, implemented by three components: (1) an Online-RLHF Specialized Intent Router trained via Generative Reward Modeling (GRPO) and (2) a StateAwareDispatcher with GoalStage finite-automaton checks and precondition/postcondition SkillRegistry validation for auditable execution control. On a recruitment system backed by the Beisen iTalent platform (6000+ enterprises), 185 expert-curated scenarios trigger 1671 live API calls. Our GSPO-aligned 7B Intent Router achieves higher joint accuracy than zero-shot GPT-4o on this FSM-constrained adversarial routing benchmark (80.9% versus 48.9%). In end-to-end execution, SDOF reaches 86.5% task completion (95% confidence interval 80.8 to 90.7) and blocks all 22 operations in the injection, illegal HR subset. Under a broader message-level blocking audit, SDOF attains precision 100% and recall 88%, expert agreement kappa=0.94. A separate evaluation on 960 SGD-derived dialogues spanning 8 service domains surfaces 201 stage-order conflicts under our FSM mapping, 41 of which arise in the normal split. This arXiv version reports the current validated scope; extended multi-seed training comparisons and deeper workflow evaluations will be released in a subsequent update.

In recent years, large language models (LLMs) have made significant progress in code intelligence, yet systematically evaluating their code understanding and reasoning abilities remains challenging. Mainstream benchmarks such as HumanEval and MBPP primarily assess functional correctness, while reasoning benchmarks like CRUXEVAL are limited to single-function, low-complexity scenarios. As a result, advanced models achieve nearly saturated scores, limiting their discriminative power. To address this, we present STEPWISE-CODEX-Bench (SX-Bench), a novel benchmark designed for complex multi-function understanding and fine-grained execution reasoning. SX-Bench features tasks involving collaboration among multiple sub-functions (e.g., chained calls, nested loops), shifting evaluation towards overall control and data flow modeling. It defines "computation steps" as the minimal execution unit and requires models to predict the total number of steps in reasoning tasks, thereby assessing a model's in-depth understanding of dynamic execution beyond simple I/O matching. Evaluation on over 20 mainstream models (including 14 reasoning-enhanced models) demonstrates that SX-Bench is highly discriminative: even the state-of-the-art OpenAI-O3 achieves only 78.37 percent accuracy on Hard-Reasoning tasks, much lower than its saturated scores on previous benchmarks, thereby revealing bottlenecks in complex and fine-grained reasoning. We also release an automated pipeline combining program synthesis, symbolic execution, and LLM-aided validation for efficient benchmark generation and quality assurance. SX-Bench advances code evaluation from "single-function verification" to "multi-function dynamic reasoning," providing a key tool for the in-depth assessment of advanced code intelligence models.

Skill self-evolution methods for LLM agents aim to turn execution trajectories into reusable skill documents. However, current pipelines typically derive skill patches from a single trajectory per task, merge them indiscriminately, and load the entire skill corpus during inference. These choices lead to unreliable evidence extraction, the accumulation of low-quality or even harmful skill edits, and inefficient use of context due to irrelevant or conflicting skill content. We propose SkillCAT, a framework that decomposes this process into three stages. (1) Contrastive Causal Extraction (CCE) samples multiple trajectories per task and contrasts same-task success/failure pairs to find the evidence that explains outcome differences. (2) Assessment-Augmented Evolution (AAE) replays each candidate patch on source-task clones, retains only those that do not damage task outcomes, and then merges the retained patches hierarchically. (3) Topology-Aware Task Execution (TTE) compiles the evolved skills into routable sub-skill topologies, so that inference loads only task-relevant capability nodes. We evaluate SkillCAT on widely-used agent benchmarks, including SpreadsheetBench, WikiTableQuestions, and DocVQA, and further assess cross-model and out-of-distribution generalization. Across these settings, SkillCAT improves the average score over the initial skill by up to 49.69%, demonstrating reliable and effective skill evolution.

CLI-based software-engineering agents have matured rapidly, yet the open ecosystem has converged on a single training environment: trajectory datasets used to fine-tune open models are collected almost exclusively under OpenHands. Models fine-tuned on this data score well under OpenHands but degrade substantially when deployed under any non-training scaffold. Untrained base models do not show this divergence, indicating the gap is fine-tuning-induced and tied to the conventions of the training scaffold. We argue that a load-bearing scaffold-specific behavior is planning structure, in two senses this paper distinguishes: explicit planning, a pre-execution plan produced as a first-class artifact, and implicit planning, the structural conventions that shape execution throughout the agent loop. Under this hypothesis, closing the gap requires moving planning from a fixed scaffold artifact to a learned model capability. We introduce Decoupling CLI Agent Scaffolding (DCAS), a backend-substitution interception layer that routes API traffic between any CLI scaffold and any backend model without modifying the scaffold, enabling cross-scaffold evaluation and planning-aware trajectory collection. Using DCAS, a controlled plan-source intervention confirms planning quality is a high-leverage component, with gains exceeding the cross-scaffold drops we observe. A model fine-tuned on a small set of DCAS-collected planning-aware trajectories under a single scaffold gains consistently across non-training scaffolds, and the two senses of planning are empirically separable in training data.

The ability of CodeLLMs to generate executable and functionally correct code at the repository-level scale remains largely unexplored. We introduce RepoExec, a novel benchmark for evaluating code generation at the repository-level scale. RepoExec focuses on three main aspects: executability, functional correctness through automated test case generation with high coverage rate, and carefully crafted cross-file contexts to accurately generate code. Our work explores a controlled scenario where developers specify necessary code dependencies, challenging the model to integrate these accurately. Experiments show that while pretrained LLMs outperform instruction-tuned models in correctness, the latter excel in utilizing provided dependencies and demonstrating debugging capabilities. We also introduce a new instruction-tuned dataset that focuses on code dependencies and demonstrate that CodeLLMs fine-tuned on our dataset have a better capability to leverage these dependencies effectively. RepoExec aims to provide a comprehensive evaluation of code functionality and alignment with developer intent, paving the way for more reliable and applicable CodeLLMs in real-world scenarios. The dataset and source code can be found at~https://github.com/FSoft-AI4Code/RepoExec.

Large language model (LLM) coding agents are increasingly deployed to autonomously perform software engineering tasks in terminal-based environments, making their reliability a growing concern. Existing empirical studies investigate why coding agents fail, yet they largely treat failure as a final outcome rather than a temporal process, providing limited insight into how failures emerge, evolve, and become unrecoverable. We present the first large-scale empirical study of CLI coding-agent failure trajectories, introducing a process-oriented framework that analyzes failure through its onset, evolution, and recovery across execution trajectories. We first collect 3,843 execution trajectories generated by seven frontier models across three coding-agent scaffolds (OpenHands, MiniSWE, and Terminus2) on Terminal-Bench, then carefully filter them to obtain 1,794 complete and valid trajectories for manual annotation (over 63,000 execution steps), from which we derive 14 findings spanning failure occurrence, root causes, recovery, and cross-system consistency. Our findings show that coding-agent failures are predominantly driven by epistemic errors, typically begin within the first few execution steps, and often remain hidden until recovery is no longer possible, suggesting that improving coding-agent reliability requires earlier validation and intervention rather than relying solely on final-outcome evaluation.

Autonomous agent systems increasingly trigger real-world side effects: deploying infrastructure, modifying databases, moving money, and executing workflows. Yet most agent stacks provide no mandatory execution checkpoint where organizations can deterministically permit, deny, or defer an action before it changes reality. This paper introduces Faramesh, a protocol-agnostic execution control plane that enforces execution-time authorization for agent-driven actions via a non-bypassable Action Authorization Boundary (AAB). Faramesh canonicalizes agent intent into a Canonical Action Representation (CAR), evaluates actions deterministically against policy and state, and issues a decision artifact (PERMIT/DEFER/DENY) that executors must validate prior to execution. The system is designed to be framework- and model-agnostic, supports multi-agent and multi-tenant deployments, and remains independent of transport protocols (e.g., MCP). Faramesh further provides decision-centric, append-only provenance logging keyed by canonical action hashes, enabling auditability, verification, and deterministic replay without re-running agent reasoning. We show how these primitives yield enforceable, predictable governance for autonomous execution while avoiding hidden coupling to orchestration layers or observability-only approaches.

We present Manify, an open-source Python library for non-Euclidean representation learning. Leveraging manifold learning techniques, Manify provides tools for learning embeddings in (products of) non-Euclidean spaces, performing classification and regression with data that lives in such spaces, and estimating the curvature of a manifold. Manify aims to advance research and applications in machine learning by offering a comprehensive suite of tools for manifold-based data analysis. Our source code, examples, datasets, results, and documentation are available at https://github.com/pchlenski/manify

Large language model agents increasingly act through terminals, yet existing surveys disperse terminal-mediated behavior across software engineering, tool use, and computer-use research. We regard terminal agents as systems whose dominant progress-bearing action--observation loop is mediated by terminal command execution, textual feedback, and stateful environment interaction. Using terminal-mediated execution as an organizing lens, this survey establishes workload-level boundaries and connects system architecture, competence acquisition, and evaluation through a seven-dimensional terminal competence profile. Our synthesis shows that realized behavior is jointly shaped by the model, interface, harness, runtime, and environment. Executable trajectories ground learning in action consequences, verification, and recovery, whereas prevailing evaluations emphasize final outcomes and expose process quality, recovery, and governance unevenly. Bounded fixed-condition diagnostics illustrate two implications: benchmark families expose different process signals, and matched system comparisons reveal benchmark-dependent performance and limits of component attribution. These findings motivate explicit reporting of system and runtime conditions, supported by replayable traces and process-level evidence. The framework provides a unified basis for studying terminal-mediated agency across software engineering and emerging application domains.

LLM coding agents are increasingly deployed to act autonomously on real production infrastructure. They execute shell commands, modify repositories, and call operational APIs. However, completing a task is not sufficient for safety. A wrong action can cause severe consequences. Existing agent benchmarks largely emphasize task completion, leaving open how agents behave under benign but underspecified instructions. We present UnderSpecBench, a benchmark for measuring action-boundary violations in coding agents (i.e., Claude Code, Codex, and OpenCode) on DevOps tasks. UnderSpecBench includes 69 task families grounded in documented incidents, CVEs, or tool behavior and organized across four DevOps capability domains and nine operational control surfaces. To isolate underspecification from task difficulty, each task keeps the same environment and ground-truth safe action while varying the instruction along three axes: intent clarity, target certainty, and blast radius. The resulting 2,208 prompt variants are evaluated with deterministic, side-effect-based oracles that separate Safe Success, Wrong Target, and OverScope outcomes; non-action runs are further classified as clarification, refusal, or deferment. Across five agent x model configurations using OpenCode, Claude Code, and Codex, the evaluation results show that underspecification does not mainly make agents fail; it makes them guess. 55.8-67.8% of runs violate at least one boundary. Target underspecification sharply degrades action quality, while blast-radius cues barely reduce action propensity. These findings show that completion-centric evaluation can overstate safe autonomy and motivate mitigations at the model, harness, and system layer.

Tool-augmented large language model (LLM) agents promise to unify scientific reasoning with computation, yet their deployment in high-stakes domains like drug discovery is bottlenecked by two critical barriers: unconstrained tool-use governance and poor long-horizon reliability. In dependency-heavy pharmaceutical pipelines, autonomous agents often drift into irreproducible trajectories, where early-stage hallucinations multiplicatively compound into downstream failures. To overcome this, we present Mozi, a dual-layer architecture that bridges the flexibility of generative AI with the deterministic rigor of computational biology. Layer A (Control Plane) establishes a governed supervisor--worker hierarchy that enforces role-based tool isolation, limits execution to constrained action spaces, and drives reflection-based replanning. Layer B (Workflow Plane) operationalizes canonical drug discovery stages -- from Target Identification to Lead Optimization -- as stateful, composable skill graphs. This layer integrates strict data contracts and strategic human-in-the-loop (HITL) checkpoints to safeguard scientific validity at high-uncertainty decision boundaries. Operating on the design principle of ``free-form reasoning for safe tasks, structured execution for long-horizon pipelines,'' Mozi provides built-in robustness mechanisms and trace-level audibility to completely mitigate error accumulation. We evaluate Mozi on PharmaBench, a curated benchmark for biomedical agents, demonstrating superior orchestration accuracy over existing baselines. Furthermore, through end-to-end therapeutic case studies, we demonstrate Mozi's ability to navigate massive chemical spaces, enforce stringent toxicity filters, and generate highly competitive in silico candidates, effectively transforming the LLM from a fragile conversationalist into a reliable, governed co-scientist.

Tool-using LLM agents increasingly coordinate real workloads by selecting and chaining third-party tools based on text-visible metadata such as tool names, descriptions, and return messages. We show that this convenience creates a supply-chain attack surface: a malicious MCP tool server can be co-registered alongside normal tools and induce overthinking loops, where individually trivial or plausible tool calls compose into cyclic trajectories that inflate end-to-end tokens and latency without any single step looking abnormal. We formalize this as a structural overthinking attack, distinguishable from token-level verbosity, and implement 14 malicious tools across three servers that trigger repetition, forced refinement, and distraction. Across heterogeneous registries and multiple tool-capable models, the attack causes severe resource amplification (up to 142.4times tokens) and can degrade task outcomes. Finally, we find that decoding-time concision controls do not reliably prevent loop induction, suggesting defenses should reason about tool-call structure rather than tokens alone.

Execution-aware LLM agents offer a promising paradigm for learning from tool feedback, but such feedback is often expensive and slow to obtain, making online reinforcement learning (RL) impractical. High-coverage hardware verification exemplifies this challenge due to its reliance on industrial simulators and non-differentiable execution signals. We propose LLM4Cov, an offline agent-learning framework that models verification as memoryless state transitions guided by deterministic evaluators. Building on this formulation, we introduce execution-validated data curation, policy-aware agentic data synthesis, and worst-state-prioritized sampling to enable scalable learning under execution constraints. We further curate a reality-aligned benchmark adapted from an existing verification suite through a revised evaluation protocol. Using the proposed pipeline, a compact 4B-parameter model achieves 69.2% coverage pass rate under agentic evaluation, outperforming its teacher by 5.3% and demonstrating competitive performance against models an order of magnitude larger.

Large-scale formalization of advanced mathematics requires more than translating individual statements: it must reconstruct a coherent theory distributed across heterogeneous sources. This process raises four challenges: discovering implicit dependencies, correcting source defects, preserving semantic fidelity, and reconciling cross-source misalignments. We present FormaTheoria, an end-to-end, AI-assisted workflow that coordinates source acquisition, formalization, proof construction, recursive dependency discovery, independent review, and reconciliation, while preserving provenance and protecting approved declarations. A shared agent framework supports long-horizon execution through tool use, context compaction, review-gated termination, section-level source context, and dependency-aware batch parallelization. Applying FormaTheoria to major components of the Classification of Finite Simple Groups (CFSG), we construct a machine-checked Lean development extending through the Bender--Suzuki theorem and encompassing the Feit--Thompson Odd Order Theorem, Glauberman's Z^* theorem, and the Brauer--Suzuki theorem. This development verifies an extensive body of deeply interdependent finite-group theory while providing a foundation for continuing the CFSG formalization. An empirical analysis of the code and recorded construction process supports the practical relevance of the identified challenges and illustrates the roles of the corresponding workflow components. Together, these results demonstrate how AI-assisted workflows can reconstruct mathematically significant formal theories from distributed literature by combining language-model agents with formal verification, structured review, and explicit dependency management.

Enhancing the ability of large language models (LLMs) to follow complex instructions is critical for their deployment in real-world applications. However, existing evaluation methods often oversimplify instruction complexity as a mere additive combination of atomic constraints, failing to adequately capture the high-dimensional complexity arising from the intricate interplay of content and format, logical workflow control, and real-world applications. This leads to a significant gap between current evaluation practices and practical demands. To bridge this gap, we introduce CCR-Bench, a novel benchmark designed to assess LLMs' adherence to complex instructions. CCR-Bench is characterized by: (1) deep entanglement of content and formatting requirements in task specifications; (2) instructions that involve intricate task decomposition, conditional reasoning, and procedural planning; and (3) evaluation samples derived entirely from real-world industrial scenarios. Extensive experiments on CCR-Bench demonstrate that even state-of-the-art models exhibit substantial performance deficiencies, clearly quantifying the gap between current LLM capabilities and the demands of realworld instruction understanding. We believe that CCR-Bench offers a more rigorous and realistic evaluation framework, advancing the development of LLMs toward the next generation of models capable of understanding and executing complex tasks in industrial applications.

Embedding-based code retrieval is a core component of coding agents and retrieval-augmented code generation, where retrieving correct code matters more than retrieving lexically similar code. Existing code-retrieval benchmarks do not plant controlled, execution-verified single-edit variants of each query's canonical implementation in the search pool, leaving the question of whether embeddings can functionally discriminate correct from near-clone-but-incorrect code unanswered in a retrieval setting. Resolving this requires a benchmark whose search pool itself contains the relevant counterfactuals -- execution-verified buggy variants near-identical to each canonical -- so that a retriever's rank ordering can be directly tested for functional discrimination rather than topical or identity overlap. We introduce ExecRetrieval, 939 Python tasks each paired with one execution-verified canonical implementation and up to four execution-verified buggy distractors, each generated by a mechanical mutation making a single targeted edit, and evaluate 23 dense embedding configurations plus BM25 under provider-native invocation with paired McNemar tests and query-level bootstrap intervals. With near-clone counterfactuals in the pool, the top hosted system reaches exec@10 = 1.00 but only exec@1 = 0.331; rank-1 misses are paired buggy variants 91.5-99.4% of the time across the four leading systems, and the canonical scores below at least one of its four paired distractors in 67-78% of queries on the leading systems. The full dataset, execution oracle, embedding matrices, environment snapshot, and pairwise statistical tests are released at the URL in Appendix D.

LLM agents increasingly act by writing code, yet a split persists between the runtime that drives the agent and the code the model writes. The runtime owns the loop, context, and control flow, and the model has little say over any of them. Letting model-written code shape the runtime itself would make agents more expressive, but it would also sharpen safety problems. A model can be diverted by a prompt injection, call the wrong tool, or fail partway and leave an inconsistent state, and each such failure reaches further when the code shapes the runtime than when it expresses a single action. We present LACUNA, a programming model for agents that closes this split while preserving safety. Each agent action is a typed call agent[T](task) that the LLM fills with code when execution reaches it, and the code is type-checked against the surrounding program before it runs. Because each action is accepted or rejected as a whole, a rejected one leaves the environment untouched, and its compiler diagnostics drive a retry. The same check also bounds which tools and data an action may use and how they flow. Our primitive expresses ReAct loops, sub-agents, skills, parallel decomposition, and multi-model planning as ordinary control flow. We evaluate LACUNA on a collection of test cases, BrowseComp-Plus, and τ^2-bench. On BrowseComp-Plus, 8.6% of generations are rejected before execution, with 0.7 retries per query on average, and the agent reaches 27.1% accuracy. On τ^2-bench, LACUNA solves 76.0% of 392 tasks across four domains with a capable model, on par with the baseline agent.

Multimodal agents for computer use rely exclusively on primitive actions (click, type, scroll) that require accurate visual grounding and lengthy execution chains, leading to cascading failures and performance bottlenecks. While other agents leverage rich programmatic interfaces (APIs, MCP servers, tools), computer-use agents (CUAs) remain isolated from these capabilities. We present UltraCUA, a foundation model that bridges this gap through hybrid action -- seamlessly integrating GUI primitives with high-level programmatic tool calls. To achieve this, our approach comprises four key components: (1) an automated pipeline that scales programmatic tools from software documentation, open-source repositories, and code generation; (2) a synthetic data engine producing over 17,000 verifiable tasks spanning real-world computer-use scenarios; (3) a large-scale high-quality hybrid action trajectory collection with both low-level GUI actions and high-level programmatic tool calls; and (4) a two-stage training pipeline combining supervised fine-tuning with online reinforcement learning, enabling strategic alternation between low-level and high-level actions. Experiments with our 7B and 32B models demonstrate substantial improvements over state-of-the-art agents. On OSWorld, UltraCUA models achieve an average 22% relative improvement over base models, while being 11% faster in terms of steps. Out-of-domain evaluation on WindowsAgentArena shows our model reaches 21.7% success rate, outperforming baselines trained on Windows data. The hybrid action mechanism proves critical, reducing error propagation while maintaining execution efficiency.

Multi-agent LLM systems share state through memory stores, vector indices, and tool registries. We model such sharing as long-running read-generate-write operations under deterministic-generation semantics -- the regime durable-execution engines enforce by deterministic replay -- and formalize four concurrency anomalies in TLA+: stale-generation, phantom-tool, causal-cascade, and tool-effect reordering, structural analogues of classical isolation anomalies, each with a TLC counter-example. The exclusion lattice over these anomalies is trivial; the contribution is the mechanically verified realizability and strict separation of one maximal chain within it, L_0 subsetneq cdots subsetneq L_4, to our knowledge the first machine-checked consistency hierarchy for such runtimes. A development of 274 Verus obligations (zero assume, zero admit; trust base: two structural axioms and a mutex correspondence) proves the detectors sound and complete against the specifications and each runtime its avoidance set. Three deployed Rust runtimes realize L0-L1 (pessimistic locking, serializable snapshot isolation, default-SI), each verified against stale-generation and refined to its state machine; L2-L4 are exec-mode-verified with dependency-free prevention twins (A3, A6, A2: 0/1000 versus 1000/1000), and L2 is run live across three model families (A3 prevented in all 120 retracted sessions). We reproduce a silent lost update in ByteDance's deer-flow, formalizing its fix as a verified L_0 to L_1 refinement, and exhibit tool-effect reordering in LangGraph's ToolNode on unmodified output, removed by an L3 commit-order sequencer. The verified detector, refinements, and realizability artifacts are the contribution; the phenomena and lattice are classical.

This paper introduces the Manifold Probe, a supervised method for discovering representation manifolds in superposition. The method generalizes linear regression probes by learning the space of features of a concept that can be linearly predicted from the representations, and then learning the directions used to encode them. We demonstrate the probe on representations of time and space in Llama 2-7b, finding manifolds which linearly represent an interpretable set of features in each case. In the case of time, we show that by steering along the manifold, we can influence the model's completions about the years in which famous songs, movies and books were released, providing evidence that the Manifold Probe can discover manifolds which are causally involved in model behaviour.

AI agents are vulnerable to prompt injection attacks, where malicious content hijacks agent behavior to steal credentials or cause financial loss. The only known robust defense is architectural isolation that strictly separates trusted task planning from untrusted environment observations. However, applying this design to Computer Use Agents (CUAs) -- systems that automate tasks by viewing screens and executing actions -- presents a fundamental challenge: current agents require continuous observation of UI state to determine each action, conflicting with the isolation required for security. We resolve this tension by demonstrating that UI workflows, while dynamic, are structurally predictable. We introduce Single-Shot Planning for CUAs, where a trusted planner generates a complete execution graph with conditional branches before any observation of potentially malicious content, providing provable control flow integrity guarantees against arbitrary instruction injections. Although this architectural isolation successfully prevents instruction injections, we show that additional measures are needed to prevent Branch Steering attacks, which manipulate UI elements to trigger unintended valid paths within the plan. We evaluate our design on OSWorld, and retain up to 57% of the performance of frontier models while improving performance for smaller open-source models by up to 19%, demonstrating that rigorous security and utility can coexist in CUAs.

Interactive agent benchmarks face a tension between scalable construction and realistic workflow evaluation. Hand-authored tasks are expensive to extend and revise, while static prompt evaluation misses failures that only appear when agents operate over persistent state. Existing interactive benchmarks have advanced agent evaluation significantly, but most initialize tasks from clean state and do not systematically test how agents handle pre-existing partial, stale, or conflicting artifacts. We present ClawForge, a generator-backed benchmark framework for executable command-line workflows under state conflict. The framework compiles scenario templates, grounded slots, initialized state, reference trajectories, and validators into reproducible task specifications, and evaluates agents step by step over persistent workflow surfaces using normalized end state and observable side effects rather than exact trajectory matching. We instantiate this framework as the ClawForge-Bench (17 scenarios, 6 ability categories). Results across seven frontier models show that the best model reaches only 45.3% strict accuracy, wrong-state replacement remains below 17\% for all models, and the widest model separation (17% to 90%) is driven by whether agents inspect existing state before acting. Partial-credit and step-efficiency analyses further reveal that many failures are near-miss closures rather than early breakdowns, and that models exhibit qualitatively different failure styles under state conflict.

AI agents are rapidly improving in cybersecurity capabilities when the source code is available for analysis, yet much of the software most consequential to cybersecurity, including malware, firmware, and proprietary applications, is available only as binaries. Analyzing such software requires reverse engineering(RE): recovering program semantics before the analysis can be meaningfully performed. However, evaluating agentic RE poses a fundamental challenge: benchmark instances must be unseen as source code in the LLMs' training data to prevent models from taking shortcuts by recognizing them rather than really analyzing them, while also matching the scale and anti-analysis protections of real software. Unfortunately, however, existing benchmarks do not jointly satisfy these requirements. To this end, we introduce SRE-Bench, the first realistic, contamination-free RE benchmark. Built entirely from scratch by RE experts with over 5,000 hours, SRE-Bench comprises 19 private, real-world-scale programs averaging 16.9K lines of code. We further developed 44 in-house anti-analysis primitives, yielding 262 binary instances and 1572 deterministically graded tasks. Our evaluation across five frontier LLMs (GPT-5.6-sol,Claude-Opus-5,GPT-5.5,Grok-4.5, and GLM-5.2) shows that RE remains largely unsolved: the strongest model, GPT-5.6-sol, scores 61.4% per instance, and fully solves only 31.5% of the instances. Our analysis further reveals that agents behave differently from human engineers, where agents are relatively insensitive to compiler optimization and static linking. Controlled ablations also confirm that both contamination control and realistic scale are essential. These results indicate that strong source-code security capabilities do not yet transfer to binary analysis, highlighting RE as an important frontier for agentic cybersecurity and SRE-Bench as a rigorous testbed to measure progress.

Agentic coding harnesses - such as Agent-Skills, Superpowers, and Agent-Rigor - are increasingly deployed to augment underlying LLMs for real-world software engineering tasks. Existing benchmarks evaluate these agents almost exclusively on outcome correctness: whether generated code passes tests or resolves issues. We argue that this outcome-only lens is insufficient: an agent that arrives at a correct solution through reckless trial-and-error, without planning, verification, or graceful recovery, is fundamentally less reliable than one that follows sound engineering discipline. We introduce RigorBench, the first benchmark designed to measure process discipline in AI coding agents. RigorBench evaluates these harnesses across five pillars: Planning Fidelity, Verification Coverage, Recovery Efficiency, Abstention Quality, and Atomic Transition Integrity. A composite RigorScore aggregates these dimensions into a single metric via a weighted sum. We curate a suite of 30 tasks spanning five categories - Plan-Then-Build, Verify-Or-Die, Doom Loop Gauntlet, Know When to Fold, and Don't Break the Build-and evaluate leading harnesses in a controlled with/without experimental design against baseline coding assistants. Our results show that structured process discipline not only improves process quality scores by an average of 41% but also raises downstream outcome correctness by 17%, providing the first quantitative evidence that how agents code matters as much as what they produce. We release the full benchmark, scoring rubrics, and trajectory analysis tools as open-source artifacts.

We present CRUXEval (Code Reasoning, Understanding, and eXecution Evaluation), a benchmark consisting of 800 Python functions (3-13 lines). Each function comes with an input-output pair, leading to two natural tasks: input prediction and output prediction. First, we propose a generic recipe for generating our execution benchmark which can be used to create future variation of the benchmark. Second, we evaluate twenty code models on our benchmark and discover that many recent high-scoring models on HumanEval do not show the same improvements on our benchmark. Third, we show that simple CoT and fine-tuning schemes can improve performance on our benchmark but remain far from solving it. The best setup, GPT-4 with chain of thought (CoT), achieves a pass@1 of 75% and 81% on input and output prediction, respectively. In contrast, Code Llama 34B achieves a pass@1 of 50% and 46% on input and output prediction, highlighting the gap between open and closed source models. As no model is close to acing CRUXEval, we provide examples of consistent GPT-4 failures on simple programs as a lens into its code reasoning capabilities and areas for improvement.

Agent Skills package reusable instructions and assets for tool-using language-model agents. Progressive loading creates failure boundaries poorly represented by session-, model-, or tool-centric traces: a Skill can be discovered but not activated, activated without instructions, or appear successful without an independently verified outcome. We present Skill Runtime Intelligence, a passive runtime-intelligence system that reconstructs supported Skill-lifecycle stages across heterogeneous harnesses while preserving unsupported stages as unknown. Its Run Panorama separates immutable events, deterministic relations, inferred diagnoses, and controlled outcomes with four evidence grades; optional trace import and OTLP/HTTP export support existing observability deployments. Across six frozen repository profiles, three coding agents, and seven clean or fault-injected conditions, all 126 executions preserve source worktrees and each correlates to exactly one source session. Yet adapters expose three distinct semantics: no Skill runs; complete runs but no failure-like events; or failure-like events in every operational-failure and clean session. In a seven-template diagnostic study, semantic aliases and Panorama localize the same six non-clean boundaries but differ in exact/status behavior; both Raw views emit a failure status on all 18 clean cases, while Panorama emits none. A known-rule graph conforms to 126/126 frozen contracts, whereas a second model completes only 228/378 calls. These observations motivate executable adapter qualification and show that event presence is not boundary fidelity, composite exact scores mask distinct errors, and model explanations must not overwrite deterministic facts.

We address the problem of runtime trajectory anomaly detection, a critical capability for enabling trustworthy LLM agents. Current safety measures predominantly focus on static input/output filtering. However, we argue that ensuring LLM agents reliability requires auditing the intermediate execution process. In this work, we formulate the task of Trajectory Anomaly Detection. The goal is not merely detection, but precise error localization. This capability is essential for enabling efficient rollback-and-retry. To achieve this, we construct TrajBench, a dataset synthesized via a perturb-and-complete strategy to cover diverse procedural anomalies. Using this benchmark, we investigate the capability of models in process supervision. We observe that general-purpose LLMs, even with zero-shot prompting, struggle to identify and localize these anomalies. This reveals that generalized capabilities do not automatically translate to process reliability. To address this, we propose TrajAD, a specialized verifier trained with fine-grained process supervision. Our approach outperforms baselines, demonstrating that specialized supervision is essential for building trustworthy agents.

As autonomous agentic systems scale across regulated critical infrastructures, the lack of mechanistic, hardware-rooted enforcement for high-frequency policy updates presents a fundamental safety gap. We introduce Ethical Hyper-Velocity (EHV), a novel architectural framework for the formal verification of AI governance policies at runtime. Unlike retrospective auditing frameworks (ISO/IEC 42001, NIST AI RMF) which introduce 14-30 day latencies, EHV relocates the Policy Enforcement Point (PEP) into the inference pipeline via a Governance-Aware Just-In-Time (JIT) Compiler. By integrating Conflict-free Replicated Data Types (CRDTs) for policy synchronization and Epoch-based Attestation Caching within Trusted Execution Environments (TEEs), EHV achieves Sub-millisecond Formal Determinism (SMFD). We demonstrate via TLA+ formal verification that non-compliant agentic actions are computationally unreachable within the system's bounded operating state space. We prove that O(1) runtime enforcement can eliminate the traditional trade-off between deployment velocity and governance integrity, reducing Governance Latency from O(days) to O(1).

While Large Language Models (LLMs) have evolved into tool-using agents, they remain brittle in long-horizon interactions. Unlike mathematical reasoning where errors are often rectifiable via backtracking, tool-use failures frequently induce irreversible side effects, making accurate step-level verification critical. However, existing process-level benchmarks are predominantly confined to closed-world mathematical domains, failing to capture the dynamic and open-ended nature of tool execution. To bridge this gap, we introduce AgentProcessBench, the first benchmark dedicated to evaluating step-level effectiveness in realistic, tool-augmented trajectories. The benchmark comprises 1,000 diverse trajectories and 8,509 human-labeled step annotations with 89.1% inter-annotator agreement. It features a ternary labeling scheme to capture exploration and an error propagation rule to reduce labeling ambiguity. Extensive experiments reveal key insights: (1) weaker policy models exhibit inflated ratios of correct steps due to early termination; (2) distinguishing neutral and erroneous actions remains a significant challenge for current models; and (3) process-derived signals provide complementary value to outcome supervision, significantly enhancing test-time scaling. We hope AgentProcessBench can foster future research in reward models and pave the way toward general agents. The code and data are available at https://github.com/RUCBM/AgentProcessBench.